Batboard

otter9309

I have to add.... GPS in these radios is useless unless you're part of a P25 system which uses it for radio/officer location through the command console. For amateur use, the GPS coordinates on your cell phone (iPhone or Android) are much more accurate and quicker to obtain (not to mention the fact...

otter9309

My understanding is that the radio will only support on BT audio accessory at a time. You can pair an audio, and up to 5 data devices at a time.

otter9309

Thanks guys

otter9309

I only have the stock MVA files, anyone have a .zip to share?

Thanks,
S.

otter9309

Thanks

otter9309

Correct, it has to be a "b" revision or later cable to work.

otter9309

Will the APX with current FW maintain keys if a feature is properly added with an iButton?

otter9309

Released in CPS R12 What's New for RM Release 1.3: RM Differential Codeplug Update (DCU): RM POP25 / OTAP now performs differential codeplug updates, meaning only the latest changes are written to the radio and not the entire codeplug. This improves performance by programming multiple radios in the ...

otter9309

QCII is coming and is in the help menu along with Singletone, and DTMF. I have been told that it will be only decode.

otter9309

You have to be joking. The R.I.C.K. IS obsolete... Build a simple interface cable that plugs into each radio. You do not need anything that is in the old R.I.C.K. I was thinking of a mobile application from P25 to ProVoice. I would like to enable and disable on demand. I realize that this an old pi...

otter9309

Any thoughts or ideas for running a RICK on the APX to a M7300?

Thanks
S.

otter9309

I was able to recover, thanks.

Now I need to replace the interface board. Something smoked on it. Fix one issue and here comes another.

otter9309

Looking for a digital SREC for a W3 T99DX+088W_ASTRO T04KLH9PW3AN
Current flash is 540001000004.

I am good with the same flash, just trying to recover from a corupt CP.

TIA
S.

otter9309

Not sure, I am still on a regular P25 non tdma

otter9309

Not sure what was happening, but the last two days it's been working fine. Very strange. I picked up a second APX to see if was just mine, and both are perfect.

Thanks again for the help.

otter9309

My APX FW was recently updated to 9.00.00 and I am no longer hearing trunked traffic while scanning from a conventional ch. If I switch over to a trunked group, it will scan all my selected TG's. The problem is I spend a lot of time on a conventional ch and still need to hear the tunked side.

otter9309

I recently went to ver9 and was able to add DYNAMIC ZONE. This is an awesome feature, that allows you to create a zone from any ch/group in the radio.

otter9309

Decimal 11775

otter9309

Update So I figured that if I brick it, it is old and not worth much so let's roll the dice! I read a good radio, and then went to clone mode. I started the clone with the good radio and after the compatibility read, I quickly moved the cable to the bad radio when it switched to write mode. The writ...

otter9309

H01KDC9AA3DN
402TYJ9413

Using 3.03 sw and keep getting "incompatible codeplug version" I programmed 3 other radios of the same batch and model number with no problem.

TIA
Steve

otter9309

Has anyone tried to change the voice files for the M5?

otter9309

You nailed it. It was the Flat TX audio under the option board menu. It was killing me, why check for settings under option board, when the radio does not have one.

Thanks for the help.
S.

otter9309

I am using this radio in a NCS250 setup. This is an inter-op solution. I had a UHF in there before with no problems, but can't seem to get this radio to work. The pin settings are the same as used before. The radio transmitts fine, just lacking the TX PL. Basicly yes, it is using the 16pin rear port...

otter9309

I have a CDM750 VHF, that will not TX any type of PL or DPL.

Any Ideas?
S.

otter9309

Looking for the XTS accessory connector pin-out please.

TIA
S.

otter9309

Found this today in the APX SW. THE POSSIBLE SYSTEM OPTIONS INCLUDE: Portable H38 SmartZone Systems Operation H37 SmartNet Systems Operation Q806 ASTRO Digital Operation Q173 SmartZone OmniLink Multizone Operation Q361 ASTRO 25 9600 Baud Trunking Systems Operation G996 Over the Air Provisioning Q498...

otter9309

Just got the first batCh of APX's in and I am trying to figure out a way to import my 5K info. Once again "M" has created an unfriendly software for their product.

TIA
S.

otter9309

Thanks for the help.

otter9309

I have a number of 5K's that tend to roam a large area these radios need to have both ADP and DES-XL encryption. I currently have both algo's in a few radios, but I can not select ADP for 1 ch and DES for another. This is because ADP is a SW option and DES is hardware. I have seen a module with both...

otter9309

I was looking at the the programming info for the BR802 and the programming interface looks to be the same as the Moto. Is it? If so, can I jump the pins from an Advisor cradle to the pager.

Thanks
Steve

otter9309

I think you can keep the system, but you need to remove the write protect option. This will allow you to edit the conv, but not the P25 statewide (ASK) trunk sys. All of this would have to be done by the ASK holder.

otter9309

Most of the Metrocalls and USA MobilityI have worked on use THEBEST

otter9309

Any updates on using newer FW and SW on Q52 only radios?

otter9309

Do you have the CAPS for the above info?

otter9309

The Elite is a common pager,and you should be able to get a local shop to break the PW. I would not expire all the tries.

S.

otter9309

Will the XTL 1500 VHF do QCII encode and decode?

TIA
Steve

otter9309

Does that mean I must use a dongle at that point? Have you confirmed this?

This info is strarting to get conflicting.

TIA
S.

otter9309

I have a 5K that is 850ch. If I upgrade to Host 10.xx.xx Will I be able to have more than 240 FPP? New Radio Features Supported: ============================= NOTE: FIRMWARE VERSION R10.00.00 or HIGHER IS REQUIRED FOR THE FOLLOWING FEATURES TO WORK IN THE RADIO: • 900 MHz band for XTS 1500 and XTS 2...

otter9309

You will have to order from the district rep. for Moto dealers.

otter9309

Anyone have a wav file of the different alert tones?

otter9309

If you switch cables on the mic will it work with the XTVA??

Steve

otter9309

I am needing "on the fly" cross banding for short periods of time.

otter9309

Let me know if you pull this off, I have been wanting to do the same thing with a XTS5K (VHF) & M/A-com Jaguar (800).

Steve

otter9309

What part number are you using for a VHF amp (151-159)?

otter9309

Is there a part number for a complete XTVA with power amp? Everything I am seeing on MOL is indv. part numbers.

Thanks
Steve

otter9309

I am unable to get MDC ID's to show up on the display (analog conventional). On Astro conventional ch's I am able to see unit ID's all day long. I have looked over all the programming and nothing is jumping out at me. Thanks for any help. Steve Radio is XTS5K M3 Host 08.00.00 DSP 08.00.00 CPS 9.0 Lo...

otter9309

Not sure if was Ameritech or Motorola. The pagers were new stock not placed onto service, but show a inventory number of 1234567890 and Ameritech in the top of the powered display.

S.

otter9309

If I read a radio encrypted with ADP software not a UCM, can I add channels and program the radio without re-entering the ADP keys?

TIA
S.

otter9309

I just got a couple of CP1250's in to replace some Advisor Elites. These are NIB and have a password form Moto. They are not programed for service, but preped for the carrier. Anyone have a work around?

Thanks for the help.
Steve

otter9309

Simplecast is a great tool. I have used it on some ip steams. It does have a bit of a delay, anywhere from 30sec to 1.5 min. As far as the CDM just tap into a remote speaker with a 2.5mm female plug, then a double male cable from rad-shack to your pc. We have done this for station alerting over a P....

Search found 122 matches