I have a maratrac siren with dek control head and if anyone has used these units as stand alone if so how are they wired up ?. I have the cable for the siren box to dek. Cable has zip cord for speaker and green/orange wires from end of the plug . When I tried testing it there was no power to the dek...

Yes Steve the mobile radio

I have a uhf micor and I was looking for the wire pinout for the black 22 connector.
Checked the repeater builder site have tons of micor information but nothing located.
Unless I missed something .

I have a syntor x model t45vbj7000bk with a systems 90 8 channel control head. Hnn4008 . The problem encountered was the green 12 volt wire broke from the pin On the black connector . I don't own a manual for this radio . The closest thing I found Online that it's suppose to connect to pin #12 and i...

I have a old unitrol wig wag flasher that i will be installing and i'm looking for anyone who has one thats fimular with the wiring on these and has instructions or knows possibly were to find them

I have a syntor X on 800 mhz and I'm curious to know if the programing of these radios are still possible since I would like to get it programed the other question I have do the syntors use a eprom chip like the delta and ranger radios ? it would be easier just to pull this out rather then send out ...

Anyone ever have a cdm1250 low band that wouldn't power up ? I heard sometimes that this can happen and is caused by a bad eeprom

I have a low band CDM1250 and was wondering if its possible to use a vhf pac rt with it and what would be needed
to do this

Thanks to all , with the information I have I would say sending back to the factory and have them fix this problem would be the answer

I have a low band cdm1250 the radio now reads a eeprom cs error message when its turned on. Has anyone ever had the same problem with this radio and what does it indicate ?. And last how can it be can corrected..Thanks