I have a minitor V low band 45-49MHz and I have a Motorola Minitor V Programmer Kit On low band it seems pretty good, if you have more towers then your golden I actually put my squelch to 5 the maximum opened squelch, it goes pretty decent, i do get interference when I walk near a computer or near a...

engvt wrote:The Swissphone RE629's are infinitely better, smaller and cheaper. That is why they are begging people to buy
Minitor V's and endure countless warranty repairs.........

better how?

To all those interested in the programming guide

Just download and install the Minitor V PPS and go to the folder on your start menu --> All Programs --> Minitor V PPS ---> Programming Guide
yes, the programming guide comes with the software that you can download free from motorola

THANK YOU SO MUCH!
Finallly I got what I needed!

Hello, I need to know where the positions where the gold pins go on a standard motorola minitor V 5 Charger. its kinda urgent, thank you

I've seen Director pagers for NWS alerting

I think that it might be an "out of band" question. I definetly saw a Minitor 3 on ebay on the 2 meter hand band, so I know its possible, its out of band programming, its probably easier to do on a crystalled minitor as it cant give you the error crap for bad frequency, just some tuning ne...

You could possibly take your phone now and sorta "break off" the antenna. I did on mine and you can stick in whatever telescopic or whip antenna ya got, maybe 4 feet or so and see if that works

I have a Minitor V Programming PDF file if your interested send me a PM

yeh,
Put a Minitor II and a Minitor V next to each other and wait for a transmission. everyone says that the minitor 2 has the best sensitivty

probability scan seems pretty cool. you can listen to either F1 and F2 pages transmission and on alert on F1 and F2. except that it doesnt check F1 while an F2 transmission is going. I would use Priority if your on duty

I dont have that, it seems be something like it takes a few seconds for it to "start-up" and turn on the speaker for the transmission

its on the batlabs "Minitor" pager To turn a 1 channel pager into a 2 channel pager: read and save a codeplug (.dat file) edit .dat file at offset 2CCh from 1 channel to 2 channel load the new 2ch .dat file into the RSS and change the info you want for channel 2 re-save the .dat file edit ...

yeh, probability scan will allow you to hear any transmissions on either channels (the yellow light will light up for that)
and it will alert on either F1 or F2
its almost the same thing as priority except with priority scan, ONLY F1 will alert

really? what band splits are you having problems with? when were they made?

HRN wrote:Minitor I's are also included in the trade-in plan even though they are not in the drop down list.

there still talked about?

Sorry, I don't have any pictures. The screw I mentioned is the one that holds the housing on the pager. I only mentioned it because by starting to remove it, the stress on the circuit board changes and most times the noise will stop. Just a troubleshooting tool. Once you have the housing off the pa...

When it is making this noise, start to remove the screw in the bottom. If the noise stops, you probably have a squelch control pot that needs to be repaired. It happened a lot with the Min 2. I would usually remove them to find that one leg had never taken solder properly. After cleaning the legs a...

I bought a minitor 2 for $20 off ebay so I could listen to the counties fire dispatch, as I dont have a scanner with low band, I use Motorola radio gear for specific bands. I dont have any tones for it so I leave it on "1" to hear everything, after a few days fo having it, I turned it on o...