Batboard

K8SWR

Thanks to all the Replies I had Checked out Mike's site, and traced the Added Green wire to the red wire on Pin 13 in the radio connector, which also runs to the Control Head, I know have Backlights in the control Head but No display, and speaker sound "static" when I turn it on. so I will...

K8SWR

I picked up a Syntor x9000 T71KEJ70AK today at a yard sale, and I was told it worked, but when I got it home and hooked it up to the power supply, nothing came on, I would think the power switch was on the bottom of the control head, I after reading I see there is (2) Two wires Orange and Green on t...

K8SWR

I'm a Ham and I currently have a radio installed in my truck with the Antenna wire going through the Firewall at the steering column boot and powering it off the ACC power port.. (a no-no I know) the problem is I haven't been able to find a good place to run the power and antenna coax... Anyone with...

K8SWR

So is the mic audio Hi + and the mic audio low -????

K8SWR

I have a Moto Desc mic model TMN1008C

Has the following color wires

Black
Brown
Green
White
Braid

Can someone tell me what each go to... I want wire this to my Ham radio...

K8SWR

Kenwood TR 7400A 2 meter Ham radio

Also It's supposed to Be 500 Ohm..

K8SWR

Is there a good Dynamic Motorola Mic, That's readily available??

K8SWR

Can someone give me a model number of a MOTO dynamic mic?? Hand or Desk prefer something readily available...

K8SWR

No I'm wanting to replace this Mic that is on a Kenwood ham radio It needs a 500 ohm Mic.

K8SWR

I have a NMN6156B Ht Microphone and I'm Trying to find out What Ohm it is?? does anyone know??

K8SWR

on the power plug which one is the Positive the covered post or the open post...

K8SWR

Well This radio appears to be a 5 pin?? Also How do you tell how many channels???? The model is D43MJA7DA5CK

K8SWR

Whats the going price for a Maxtrac VHF 40-50 Watts? ?

K8SWR

I was talking to someone and they said that the duplexer shouldn't be the problem with the audio because duplexers only deal with "RF" not audio is this correct for the duplexers in the flexars???

K8SWR

I'm interested in one How much are they.?????????

K8SWR

Ok Well I bypassed the Duplexer and used 2 antenna's it works good except for the Desensitizing of the receiver...

I'm not sure if the duplexer just won't work in this Frequency range (444.300 449.300) or If It needs to be tuned again????

Does anyone have a Used 440 duplexer for sale????

K8SWR

Well the Duplexer was retuned also... The PL is correct... and As far as I know it is set up right...

You can bring up the repeater but just no audio....

K8SWR

I have a Flexar repeater I recently did a frequency change and had it aligned... It doesn't work right in in repeater mode.. If you turn off the repeater and use it as a spit frequency transmitter it works ok... Anyoyne have any Idea's?????? You can break the squelch but no Audio in repeater mode....

K8SWR

I have a Flexar repeater I just got up and running.. I would like to know if there is a way to change the monitor switch in the front panel so you can either turn the PL tones ON or Off instead of turning them off til the PTT is pushed....

K8SWR

Recently I had found a Site on the Web That has a bunch of formulas and or calculators for antenna's and frequency seperation... Since then my computer crashed and I lost it can someone help??

K8SWR

My cousin and I want to set up a 6meter split site repeater.. is there a MoTo radio to convert for this??? we will probably use 440mhz between the 2...

K8SWR

I have a Flexar Repeater, We got it working and have installed New crystals(Ham 444.300 and 449.300) it works but it needs to be aligned along with the duplexer.. is there anyone in or around michigan that I could take it or send it to and get it aligned??? I have the manual just not the equipment.....

K8SWR

I'm running APRS and I'm using my Icom 706 to run the program I was thinking of maybe picking up a maxar or something similar to run instead anyone have any Idea's or suggestions???

K8SWR

I 'm going to mount a 2 meter antenna on my chevy truck on the front fender... like I have seen many others... My question is what kind of Rf exposure is there? and should it be a concern I will only be using 5 watts most of the time ...

K8SWR

Well I'm going to go with the Fender mount for now, As far as the tint it's the Factory rear tint and it just doesn't seem to work with my antenna..

Now As far as running the coax through the firewall.. whats the Best Idea as far as this.....

K8SWR

8) I just bought a 2001 silverado Ext. cab I don't want to drill through the body so I installed a Glass mount antenna, Well ther tint on the window is making my SWR way too High. So I guess the next option is to mount it on the Front fender.. There is a rubber strip that goes along the edge I will ...

K8SWR

Well i'm not sure whats the problem with yours could it have something to do with the screw that was put in to hold the belt clip on???? I have one of these radio's and it was purchased new in 99 and I have had no problem with it til the other day mine won't receive on 2 Meters but works fine on 440...

K8SWR

I bought a couple of control signal corporation CW ider's and I want to change the call sign I called CSC and they told me it would be $27.00 for the prom insie that you have to change this seemed kind of High to me is there a nother company that makes these proms or is there another way to change t...

K8SWR

The radio was used in the 460.000 mhz and we have realigned the transmit and tried it before the receiver was aligned we are going to try and align the complete thing then try it.... It will transmit to a HT near by but we tried about a mile away and no luck....

K8SWR

Yes it did have crystals in it it worked fine.. now we are just trying to realing for ameratuer band I think we just miss read the instructions....

K8SWR

I have a maxar Model # D24TrA3300BK we are trying to align it for Ham band 444.300mhz The unified chassis # is TUE1373BK Can this be aligned for this Freq. of 444.300?????

K8SWR

The guy that I bought the flexar form said to put the crystals in it and Align the radio then it should transmit and receive does this sound right?????

K8SWR

I have a flexar base with the following numbers in it for the transmitter and receiver Trans:TUE1613AB Rec:TUE1603AB are these right???

K8SWR

does anyone out there have a copy of the schematic for the flexar Repeater receive unit???? I have 2 base manuals but I need a schematic of the Repeater receiver????????

K8SWR

I'm not sure your understanding ... I bought the unit without crystals... So I can't put the crystals in and Test it. I have to test it then realign this...

K8SWR

Here's the scoop I bought a Flexar repeater off of here from a guy I was told it worked just needed crystals.. So I took it that it worked, I ordered the crystals for the Freq. I wanted took it to my cousin Who works on my Electronic stuff He says when He plugged it in and hit the monitor key on the...

K8SWR

Well I understand the Alignment process the problem is that I can't get it to Transmit or receive.... Need to know what to check?????

K8SWR

I Got my crystals for my flexar and put them in , but not getting any sound ( scratch or nothing) or power output. Anyone have any Ideas or thing to check??????

K8SWR

I bought a flexar base for the power supply for my repeater, and afterwards I got to thinking Trying to convert it into a 220 mhz ham Base??? can this be done ??? the model number is L23TRK3102AH.

K8SWR

Does it matter if the Pl boards are out of UHF or VHF???????? I looked at a flexar forsale for parts and it had a pl board in it but it was VHF and Mine is UHF...

K8SWR

I contacted Com-Spec they told me the TS-32 Was discontinued and replaced with the TS-64DS just thought I would pass this along ....

K8SWR

I too have a flexar that i'm gonna set up onto ham bands The guy I purchased it from was supposed to send some pl boards with it but it's been 2 weeks and nothing so I take it that there not coming so i'm looking for some boards or maybe some info on the TS-32 Programmable Tone Encoder / Decoder Boa...

K8SWR

I have a flexar repeater and someone had emailed me yesterday telling me there is a way to align the flexar by using different combinations of pins in the connector on the back?????? can someone give me information on this??????

K8SWR

I know where i can get a Repeater test panel, would this work with my flexar unit or does it take a certain one??????????

K8SWR

I'm getting a flexar repeater UHF 40 Watt and It needs a power supply can someone tell me what size I need as far as amps etc. ????

K8SWR

I'm looking for some ideas on an antenna For a flexar repeater I'm going to use on 440mhz anyone have any suggestions?????

K8SWR

I'm new to the motorola brand of radio's and I'm looking into a flexar repeater. I just want to stay cheap, Because if things don't work out I don't want to have a lot invested. Is the Flexar capable of haveing ID voice or CW? I read that you can use a phone patch with it... Thanks...AB8JD

K8SWR

what type of crystals does a flexar take and Does anyone have any suggestions on where to get them???????

K8SWR

Does anyone have a photo of a motorola flexar????? or know where to find one on the net?????

K8SWR

does anyone know if a flexar repeater cna be used on ham bands???? and any input on this unit will be appreciated...

Search found 50 matches