Batboard

N2YP

The radio in question is 402AWU

N2YP

I have this HT1000 model H01RDC9AA3CN with a problem. When I transmit a carrier and monitor my signal on another radio, I hear a crackle, kinda like a geiger counter like sound, on the receiving radio. I have removed the front case from the "bad" radio and detached the flex cable and if I ...

N2YP

YES! The codeplugs are a bit weird

N2YP

Hi folks, I'm hoping that someone will be able to help me identify some boards in a radio that is supposed to be an MTS2000 (48 ch). The stickers are missing but there are some stenciled numbers on the pcb, The first one is an rf board with 4221 J03, The controller board has these numbers 7122 - 186...

N2YP

Can anybody tell me what this error means on an MTS2000.

N2YP

Any other suggestions out there?

N2YP

I'm looking at the display there is only a piece of pcb above the display, no pot. I looking on the side where the tt pad switches are located.

N2YP

Am I looking for a pot? Left right or center of the display.

N2YP

Can you give some more info about the adjustment. Where is it on the board, front back left right etc. I have looked carefully and can't find anything to adjust. TIA

N2YP

Couldn't find any set scews. Any other ideas?

N2YP

N2YP

Is there a way to control the contrast of the lcd display? (A7 model)

N2YP

I am trying to program an MTS2000 "AN" model with windows cps. When I try to send the data to the radio I get this message" Block model definition (1) overuns end of region"

What is it and how can I fix it? TIA

N2YP

Found it! Many thanks

N2YP

Can one program the HT-1000 for a bandwidth of 12.5? If so how? Can I program channel 1 with a bandwidth of 12.5 and channel 2 a bw of 25 and so on. TIA

N2YP

I have been able to use the bat-trick to make my 450-520 mt2000 work in the ham bands. For a MTS2000 being programed in Windows with CPS software, is there a similar trick. How do I get my 450mhz MTS2000 to work on 440mhz?

N2YP

I bit the bullet and plunked down my$250 to big M. Here is what I got:
3 years of updates. A dos disk for the mt2000 version R06.05.00 dated 2 Oct 2000; A cdrom for the mts2000. A tech told me that M will NOT be making anykind of windows version for the mt2000. Anybody got an MTS2000 for sale!

N2YP

Wow thanks a bunch guys. I've learned a bit today. I have even been moved to fork over a donation!!!! Now if I can get the software I need!

N2YP

I just picked up an mt2000 on ebay. When I tired to program it I get an error that says the codeplug is too new. Does this mean my RSS is too old? I have version R06.04 is there a later version? Or pehaps, the radio I bought is a lemon? Any thoughts or help is much appreciated

N2YP

Thanks Alex, it worked! is there anyway to get the screen to slow doen so I can copy the serial number? It goes quickly to "RF test" then I don't know what to do. Get the camcorder out, and tape it. Frame step the playback. Thanks Bob, great idea. By doing it a bunch of times, I was final...

N2YP

Thanks Alex, it worked! is there anyway to get the screen to slow doen so I can copy the serial number? It goes quickly to "RF test" then I don't know what to do.

N2YP

Is there a way to put an MT2000 A7 into test mode by using a combination of power on and a side button?

N2YP

Thanks for the info Angel. If I set up the radio with 10 zones then I CAN use the rotary switch to change the channels. YES? Another issue: Sometimes I get a "checksum" error when reading the radio. If I move the radio away from the laptop, it seems to be OK. Is it RF from the computer or ...

N2YP

Hey out there. I am still working on programming my MT2000 Model HO1RDH9AA7AN I want to double check my logic. 1) There can be 10 zones where each zone can have 16 channel personalities. Is that correct? 2) Some of the zones may have the same personality channel of another zone. Yes? 3) When I look ...

N2YP

I am looking at an A7 Model: H01SDH9AA7AN on Ebay and it is a
Frequency Band: 450-520MHz. What must be done to the radio to make it usable on the 70 cm ham bands? TIA

N2YP

Is there a way to use an MT2000 800mhz HT on the 900mhz ham bands? How? TIA

N2YP

Is there a way to use an MT2000 800mhz HT on the 900mhz ham bands? How? TIA

N2YP

Thanks for such a clear and comprehensive answer to my question.

N2YP

What is the difference between a "personality " file and the file that saved the codeplug data (Channels etc). Is setup.mot a generic personality file?

I havent figured the terminology yet. I am refering to an HT1000 H01RDC9AA3DN

>What is a "codeplug"
TIA

N2YP

Yes, sorry the model would be important! I am refering to an HT1000 H01RDC9AA3DN

N2YP

How do I create a personality file?

N2YP

Hartley wrote:Hi,

That doesn't tell me much about the radio - what is the whole number?

Hartley

Here is the exact # H01rdd9aa4an

N2YP

Hartley wrote:What is the model of your radio?

Hartley

Its the 48 channel "AN" version, top display

N2YP

Thanks, I have used the find command in hex workshop and cannot find any more "478s" to change. I'm really stuck.

N2YP

I have modified the mtsx.obd file as suggested. I want to program my MT2000 to receive 485 mhz. I have an MT2000 AN model (403-478) Using the find command in Hex workshop, I have changed every "470" to 512. When I connect to the RSS, I still get the "Frequency out of range 403-478&quo...

N2YP

I have modified the mtsx.obd file as suggested. I want to program my MT2000 to receive 485 mhz. I have an MT2000 AN model (403-478) Using the find command in Hex workshop, I have changed every "470" to 512. When I connect to the RSS, I still get the "Frequency out of range 403-478&quo...

N2YP

No VHF in UHF! Of course!

I want to monitor in th 485 range, not xmit. Thanks Alex.
N2YP

N2YP

Thanks for the suggestion. There is a comment at the end of the instructions that states "no guarantee it will actually work" So, I am wondering if anyone has tried the process and had success.
TIA
73

N2YP

I just got a used MT2000 UHF 405-470Mhz. I know how to program an out of band frequency on the HT1000 (shift key) but can't get it to work on the MT2000.

I want to recieve a signal on 482 Mhz. Anybody know the trick?

N2YP

Thanks for the suggestion. So far as I know they are exactly the same radio, same power and model. The only difference is the serial number!

Search found 40 matches

Serial

Strange problem Ht1000

Yes

Parts ID

KYFAIL?

Thanks but..

Still can't find it

Left?

More specific please

Nope

HOW?

MT 2000 display contrast

"Block Model definition overrun??????

THANKS

HT1000 channel bandwidth

MTS2000 Out of Band question

Follow-up

Thanks

MT2000 codeplug "too new"

Re: Tip

Tip

MT2000 Test Mode

Thanks but..

Programming the MT2000

Using an MT2000 "SDH" on the ham bands

Converting MT2000 800 mhz for 900 mhz ham bands

Converting MT2000 800 mhz for 900 mhz ham bands

Thank you both

Some newbie questions

additional info

Personality File

Re: MT2000 out-of-band

Re: MT2000 out-of-band

Have used find

Problem with MT2000 out of band change

MT2000 Out of band fix

Does it work?

MT2000 Out of band tricks

Cloning