Batboard

elkbow

BKXCEP wrote:The documentation comes with the toneboards whitch are hard to find in the OEM packaging if you can get them from Japan the instructions are in Japanese so best of luck to you

You realize you replied to a topic almost 15 years old? Lol.

elkbow

Terry, just noticed you are from Albuquerque also....lol

yeah if anyone else has seen this, let us know, going to do some searching

elkbow

tried reseating the connector between the two boards and looking at the solder joints, no go, still does the same thing

elkbow

Thanks Terry, I'll check it out. I'm positive of a good seat on the flex and the speaker, I have a few radio's so tried different display boards and speakers so its not a speaker connection, its something on the main board. It hasn't been disassembled by me since I've had it other than the cover and...

elkbow

I have a MTS2000 UHF Model III and doesn't have any audio unless i smack it on the side then audio comes through. Seems like something may be loose or something, but i can't find what it is. Seems like sometimes when i power it up it will work, but then goes back to not hearing. But pretty reliably ...

elkbow

The Pager Geek wrote:http://batboard.batlabs.com/viewtopic.p ... 0&p=358991

tpg

thanks Tim, all that searching I did I could not find that, i had already fixed the lock by modding and older version of the CPS and eliminating the password, but this will be helpful

elkbow

For R06.08.05 I found it at offset: 02380650 change 741C to EB1C that should take care of the problem! Has anyone found the address/offset for R06.10.02 ? I tried the other day for over an hour, and I went form top to bottom of the file changing from to 74 to EB where I saw it. No luck, ether it do...

elkbow

i noticed the vertex repeater software was under my software area, weird

elkbow

yeah let me know what you think when you get it

elkbow

looking at the freelink site, they make an adapter for every motorola ht i can think of, including all the xts's

elkbow

I read the old data and reviews of the Motorola BT, which also talked about the freelinc in the thread. So since several months has passed, i was looking at one or the other. Wanted to know opinions of both and noticed that the Freelinc Freemotion is now $249 with the adapter, which I believe it use...

elkbow

and you should be able to use the p2 key and the key above it to cyle through the zones, so if you program p1 for zone, then use p2 and the button above it to cycle through the zones

elkbow

i just checked, they added it

elkbow

yeah, i opened a case this morning to get them to add it

elkbow

I've already looked there alex, not there, i purchased the pro series cps kit that comes with the cable, etc if i go where you said, here is what it shows: Firmware/Flashing -------------------------------------------------------------------------------- Professional Series Mobile Firmware R05.08.01...

elkbow

I purchased a CPS on MOL and it shipped today, but don't see anywhere to download it now. I went under Resource Center > Software Support > View Subscriptions, but nothing there yet. Does it take them awhile to list it or is there another place for download?

elkbow

i ordered H5177R and it went through fine and it does include the following: H5177R Portable & Mobile Programming Software Plus (CPS+) - 3 Year Subscription Package HVN9025 includes CPS/PPCPS (PassPort® Customer Programming Software), CPS tutorial, reflashing tool and freq. finder application fo...

elkbow

yeah i never turn on the APF

elkbow

ok, is it flat just on rx or tx also?

elkbow

what are all your settings

i usually go:

compression: disabled
expansion type: low-level expansion
emphasis selection: De-emphasis & Pre-emphasis

elkbow

lol, yeah maybe i was lucky, i also asked them about getting access to the software in my account, so i could see it, they said fill out the software license agreement online and it will open a case, so i did and got an email, so hopefully they will get that done soon, i ordered some parts already, ...

elkbow

opened a case, they already fixed it this morning, good deal

elkbow

can't do the settings/preferences/general settings, my address is correct there, but when you go to settings/preferences/order defaults it is wrong and won't let you correct it there

elkbow

Dang motorola when i order something has my shipping/order default address messed up, its not the same as in my normal preferences, i would have thought this would have pulled from there, but apparently someone finger punches it in when they setup your account i can't figure a way to change it, does...

elkbow

one of the guys i ride with has a dual band mobile ham unit, mounted in a large ammo can with a gain antenna mounted on top of the can for a good ground plane, that way you have plenty of db gain for the antenna and the power of the mobile unit, he has a remote head for the radio ran up to the pod a...

elkbow

i've only done the volume pots before, pretty easy if you have good soldering skills....

elkbow

thanks

elkbow

tried searching, couldn't find it, so if someone could please post...thanks

elkbow

i think thats what i found, most of the newer ones will only work with a few cables, but the older ones seem to work with any of the cables...thanks again...

elkbow

Jim, got them to read/write, picked up another cable like you said....thanks...

dave

elkbow

Thanks Jim, I'm definitely interested in the OEM cable, I'll be doing some more searching today for a good price.

I hooked up and older computer today and installed the sw there, same problem. Could be the cable...

elkbow

Searched all over the internet, couldn't find any information there, so needed to put in front of the Pro's here, as I can always get the answer... Anyways, I picked up a Kenwood TK-3170 UHF radio. Nice little unit. Then I bought the KPG-101D software to program it, factory new and sealed. The compu...

elkbow

I can also help you out quick if you want to ship the radio....I have the 1550 and can program and setup your field programmability...

Dave
elkbow@comcast.net

elkbow

K8TEK wrote:Inverted DPL

yup, thats what I do...

elkbow

i don't think thats possible....

elkbow

I believe also from past experience that the firmware version makes a difference, newer firmware I thought corrected a problem with the clock...may just be my bad memory, but I seem to remember something on this before, may be worth doing a search to find it..

elkbow

you can clone one to the other and then just shutoff the numeric keypad for the limited keypad model or turn if on for the full keypad model ....it won't matter.... but in order to clone a codeplug...they have to be the same model, other than the limited or full keypad...you also have to have the 'c...

elkbow

what you want to use is a PCMCIA RS232 adapter...you can get them with 1, 2, or 4 ports....these work, unlike USB to Serial cables with drivers....which don't work in many cases, like on my new dell 700m...but the card adapter does...

elkbow

Ive got a UHF and and VHF HT1550. They are nice radios. The FPP makes them even nicer. You need to set up the FPP using the CPS though. Getting the programmable battery was easy Fowler Hey Fowler, you finally got that UHF 1550 huh? I guess I still need to pick up the VHF version...one of these days...

elkbow

It looks like; Definately an "H" is first, then 265 then 3845 Not sure what that last little mark is. Can you get a little closer pic?? I put in the 265, then 3845, then H, and it works fine now.... thanks for everyones help....I'm going to write on the side of the case 'TUNING DATA # 265...

elkbow

i was just thinking of the same thing...I think what looks like a '11' in the front is actually an 'H'....

i'll start over and try it....and report back

elkbow

here is a pic of the board and numbers...it sure looks like that white tag is the tuning data, and a 10 digit number....not sure how to go about this

elkbow

You have the wrong numbers. It is never a 10 digit for the tuning. Always 7 (3 then 4). But the sticker just has them run together. And they can only be a certain range. That is why you are not able to enter some of them. And then "H" only if there is an H on the sticker. Look around for ...

elkbow

for some reason it won't let me put values in the tuning data fields....it does start out with the cursor in the first row of crystal data, i enter it, hit enter and it goes to the next crystal data, enter it, then to the first 3 digits for the tuning data, hit enter and it resets it to zero.... i'm...

elkbow

Mike is the guy who watches over the website, name here is Scott. But don't sweat the details! LOL I had assumed that you were using the same RSS for the reading and writing, so it got me too. Stupid LAB, set to Com 2 by default. That got me when i first started using it, but it still wasn't the sa...

elkbow

they are nice radio's, and if you get some of the field programmable batteries, great for updating in the field...

elkbow

here is a pic of my ht1250, ht1550, mts2000

[/img]

elkbow

got the radio blanked and reloaded with tuning data.... Mike, one thing I noticed (sent you a PM), the white label inside of my radio had a 10 digit code, not 7 digits. I did pull the osc. values and when retuning, you enter the values from the osc., but it does not allow you to put data in on the t...

elkbow

boy, its amazing how sometimes I look past the obvious....that was the problem, it was on COM 2 instead of COM 1 another question for Mike....on your instructions, it says to write down the tuning number/board number, its a 7 digit number on a white label....well, mine has the white label, but its a...

elkbow

xmo wrote:LAB RSS accidently set to the wrong comm port?

you know what, that may very well be the case...i forgot to check it...i bet thats the problem, its normally the first thing i do when moving it installing it...but....i've been a dumbass before, wouldn't be the first time...

Search found 992 matches

Re: GP68 DTMF

Re: MTS2000 Audio Question

Re: MTS2000 Audio Question

Re: MTS2000 Audio Question

MTS2000 Audio Question

Re: Password for CDM1550LS

Re: Password for CDM1550LS

Re: Vertex on MOL

Re: Motorola Bluetooth vs Freelinc

Re: Motorola Bluetooth vs Freelinc

Motorola Bluetooth vs Freelinc

Re: Professional CPS Programming Question

Re: MOL CPS Download?

Re: MOL CPS Download?

Re: MOL CPS Download?

MOL CPS Download?

Re: H5177R vs HVN9025

Re: HT1250 flat audio

Re: HT1250 flat audio

Re: HT1250 flat audio

Re: MOL question

Re: MOL question

Re: MOL question

MOL question

Re: Communications For ATV Riding

Re: ht750/ht1250 Volume Pot part number?

Re: ht750/ht1250 Volume Pot part number?

ht750/ht1250 Volume Pot part number?

OT, Kenwood programming