Batboard

J.Sanor

Yup, That's it...Sounds too easy.

J.Sanor

Depends on the chip used om the cable. I have windows search for new hardware see what type of chipset it finds then do a Google search for a matching driver.

J.Sanor

Dave, Yes you will need a USB driver to make the cable work. I have had a few and the work fine as long as you find a driver. Jon

J.Sanor

There is this real neat online site called "Bat Labs" WWW.BATLABS.COM and on it is a page called "Model Specific Information" and in there is a page devoted to the railroad Spectra.

http://batlabs.com/rrspectra.html

Sorry, Had to do it.

J.Sanor

Monitor light, hang up your mic.

J.Sanor

one sent.

J.Sanor

freqs are 464.375 and 469.375 = 5mHz split.

J.Sanor

Jim,
License is for 45 watts output power with a 75 watt ERP.
Look for a 45 watt repeater.
I know for a fact the GM300 has had PA problems,over heating, dead cooling fan for an extended period of time.
The reciever has had issues too, that flashy stuff that comes out of the sky, lightning

.

J.Sanor

Must be a secret

PM sent jim

J.Sanor

No, that will not do it. You will need something more like this

http://cgi.ebay.com/Celwave-UHF-6-Cavit ... dZViewItem

J.Sanor

The complete kit. mount, spring, whip & whip adaptor, coax......

Correction, that is less whip.

J.Sanor

TAB1002C is what I have here.

have one in stock

J.Sanor

The new cone type antennas have the color code around the connector under the skirt of the antenna on the washer that is also the insulator.

J.Sanor

He most likely set your power on test to "Musical"

sounds sick like you have done something wrong to the cat

J.Sanor

If you go to support, you will find PDF file application notes for both radios

http://www.pyramidcomm.com/svr200an.html

J.Sanor

http://www.pyramidcomm.com/

J.Sanor

Try turning on the Companding feature for channel 2. This is supposed to improve the audio on narrow band channels

J.Sanor

Bottom one

J.Sanor

Check the reminder alarm settings.

J.Sanor

The option board/voice storage is part of the keypad PCB.

J.Sanor

http://batlabs.ipv4.enterzone.net/htpro.html

Half way down the page lists the pin out

J.Sanor

"Any thoughts about the best (and fastest) way to get this done?" From the FAQ page: "Can I request firmware? This question comes up on occassion. The answer is no. It falls under the same category of RSS." I'm not saying you are asking for firmware but looks like the only way is...

J.Sanor

Not true, HT1250 rss, really CPS, is made to run on todays fast computers.
You should have no problems with your P4 running XP .

J.Sanor

http://www.com-spec.com/index1.htm

Link to the commspec web site

J.Sanor

This is the number I have on one of mine

3080091M01

J.Sanor

From the "FAQ" pages. "Can I request firmware?" "This question comes up on occassion. The answer is no. It falls under the same category of RSS." So, the only place you can get it is from Motorola. Being you just registered today it would be a very good idea to read the...

J.Sanor

HMN3174B That is a Radius mic.

J.Sanor

Good luck,
I have been sending PM's and Emails for 3 weeks about a trade with no response also.

J.Sanor

When you go to read the radio go to the file tab and chose "read device" you should get a pop up window "select port" and you should be able to chose your com port.

J.Sanor

That's what I needed to know. Thanks!

J.Sanor

Any one have a pic of the voice storage board and where it is located in
an HT1250 portable?

J.Sanor

One on the way. Jon

J.Sanor

http://www.batlabs.com/images/maxacc.gif

It's in the Model Specific Information

J.Sanor

I've done quite a few, I can send you a few pics to give you an idea.
email me.

J.Sanor

To put the radio into program mode hold the lamp and lo buttons and turn the radio on. You should get -PC- on the display.

J.Sanor

I have a Kenwood TK-760H, 45 watt, 32 channel in good condition for $225 shipped. I can also program the radio for you and have pics available. Jon

J.Sanor

RKN4075A They have been going for $90 to $110 on eBay

J.Sanor

A pic is on the way. Jon

J.Sanor

Sent you the codeplug that is comming in the radio. Jon

J.Sanor

The low split 730's will do 136 to 156, no more, no less.

J.Sanor

It's on the model specific page for the pro series

http://www.batlabs.com/htpro.html

J.Sanor

One on the way. Jon

J.Sanor

Chuck, Try holding the top right button and the bottom right button in and powering up the radio. If you get a frequency to display you can face program it ( I have the instructions). or you may have to change a jumper in the radio.let me know and we can go from there. Jon

J.Sanor

Try this

Jon

http://gullfoss2.fcc.gov/cgi-bin/ws.exe ... /index.hts

J.Sanor

works on both pre and post. I have my HT1250's and CDM mobiles displaying ID's on both pre and post transmitions

J.Sanor

Jeffrey, The kit number is RLN4883A. I got mine off greedBay over a year ago for $13.02 plus shipping($6) ( seller just had the kit number listed with no pic, lucky me

since they are going for around $75 for the genuine Motorola charger ) I'll send you a pic via email. Jon

J.Sanor

I have a N.O.S. HLN1206B for $50 shipped.
2000 price was $176 which is totaly nuts.
It is just the wild card assy. no bracket or labels.

J.Sanor

A small rubber O ring works well also

J.Sanor

You need "HOT KEYPAD" enabled in the CPS.

J.Sanor

They will do 10 channels conventional. Had quite a few as glorified scanners to listen to the local city systen till it went Astro.

Search found 68 matches

Re: M1225 programming from wide band to narrow band ?

Re: GP380 Programming

Re: GP380 Programming

Re: Rail road Spectra help

Re: CDM1250 LED Light????

Re: CDM-1550 Codeplug needed

Re: UHF Repeater question

Re: UHF Repeater question

Re: Bad dispaly on a HT1550 XLS dead pixels can anyone help?

Need later firmware in MTS2000 - Best way?

HT1250 and P4 computer

can't open port

Voice storage in the Pro series

1550 codeplug

16 pin connector

HT1250 Pin Locations

codeplug

VHF HT1250 codeplug

FCC search