Is there a way to program a Spectra with Windows XP? I cannot remember if this possible, I get error when testing comports. no communication. I tried Molslo, etc, nothing.

Hoping someone can help me out. I killed my MLM 6.10 while attempting to program a mode with split PL/DPL for repeater use. When I went to program it stated something about bad data may cause the radio to not function properly. Well, I went ahead and programmed it and got a 01/82, or something like...

Ed, Your best bet is to get a new MLM from spectragod. The MLM you have may be so corrupted the only way to clear it is to remove, erase, and program a new mask on each memory chip. As for the GM300 I haven't ever seen one prog. with split pl/dpl before. If I get a chance I will try to recreate you...

Hoping someone can help me out. I killed my MLM 6.10 while attempting to program a mode with split PL/DPL for repeater use. When I went to program it stated something about bad data may cause the radio to not function properly. Well, I went ahead and programmed it and got a 01/82, or something like...

Hoping someone can help me out. I killed my MLM 6.10 while attempting to program a mode with split PL/DPL for repeater use. When I went to program it stated something about bad data may cause the radio to not function properly. Well, I went ahead and programmed it and got a 01/82, or something like ...

can you PM, or email me direct for phone number information?

Thank you.

Ed

Jim-

I forgot to mention, all four of my MLM boards are 6.10 Version.

Thanks

Ed

Jim- I really appreciate your willingness to help me with this issue. First let me mention that the two radios in question were working fine until I attempted to clone them, so therefore I do not think its a leaky cap, or they would not have been working to begin with. Second, what I did was read a ...

Is there anyone here that could fix my three Spectra radios for a flat rate. They simply have corrupted code plugs and I have no way to fix at this time. PM me if you can help. Thank you Ed A couple of things...the Model number probably starts out T83GXA... VHFs came in two splits, 136-162 and 146-1...

Sorry mine is 146-174 Mhz. I have two other radios with same model numbers and off only 1 digit in serial numbers and they work fine. For some reason, when I read the working radios and attempt to clone to corrupted ones, I get the error SELF-CHK. Its been so long I once programmed these rigs, I can...

I have visited the Code Plug site and cannot find a code plug that works for me. I have two down radios after accidentally attempting to re-program radios with possibly a corrupt code plug. Therefore, I am seeking any assistance from the group to get these radios up and operational again. At this ti...

HLA,

I think I have most everything running now. I still would like to have a dedicated PC with DOS 6.22, etc.. to run all my MRSS. Anyways, thank for the help. Oh, which DOS Ver are you using to boot from and are you then using the MRSS on a floppy, or off HD?

Thanks

Ed

Ver 3.12 I am going to load DOS 6.22 and try it. Thanks Ed quote="MSS-Dave"]Which version of the MSF5000 RSS are you using? If you are below 5.xx or so, pure DOS and a slow machine (non pentium) is all that worked for me years ago. I was able to run a mid 5.xx (don't remember exact)version...

Tom,

Thanks!. I am currently installing DOS 6.2, and will see what happens.

Ed

I think I just may have to purchase a new copy of Moslo (Mo'Slo 4BIZ version 3.3), etc, and maybe fix my issues, or find an old 286 at a yard sale...

Ed

Well, some progress, I got a copy of cacheoff,com and some programs are running, but other are now getting error: "error 2003: Integer divide by 0" LOL!! :lol: Ed Computer is probably too fast for the older RSS. Some have had luck disabling the FIFO Buffers. If I knew how to disable I woul...

Jason, I am running WIN98 SE and I think Dos 6.?, but I ran a program called check it, and it tell me DOS 7.10. Heck, I am not sure what I have. Is there a simple sure way to determine what I am running? I would not mine wiping the drive and starting from zero, installing whatever I need to get this...

Computer is probably too fast for the older RSS. Some have had luck disabling the FIFO Buffers. If I knew how to disable I would. Does anyone have a script for setting up my config.sys, or other parameters to get this Dell P133 running? I would like to remove WIN98, and simply run the DOS 6.0. What...

I am attempting to run MSF500 RSS, and get the following error:

run-time error R6009
-not enough space for environment

My PC is a Dell P133 Mhz DOS 6.0.

I tried using MOSLO, and still get same error.

Any suggestions from the group?

Thanks

Ed

UPDATE: The correct control heads I am having trouble powering-up with my VHF Spectra High & Low power are the following HLN6337D & HLN6075D. I was curious if I read a working radio and replace not working control head and program codeplug back into the radio, will the bad control head accep...

I just purchased some Spectra Controlheads HLN6432C and they do not power-up for me on my working Spectras. My working Spectras use the HLN 6283B. Is there some jumper that make these units work? Can someone PLEASE help me out, I am out of lots of money a second time buying these control heads and n...

Tom, Sorry brother, no problem, I did not mean to break that rule. I will check e-bay and see what I can find. Question, does BATLABS have a list of all control heads model numbers and their compatibility with Spectra radios? I have several HLN6075C A-7 heads I cannot get to work with my low & h...

Tom, Thank you for the great reply. Your information is a great re-fresher on the Motorola programming. I have forgotten so much back from the late 80's. I got rid of all my old PC's, and now I can shoot myself in the foot for that. Last, is there anyone here that can fix my existing Motorola RIB, w...

I have a Motorola RIB, that I am not sure is working, its been years I mess with this stuff. Is there a way to test a rib? I am attempting to program several motorola radios, i.e. M100, STX, spectra, and I get power errors. Also, I have no real slow enough PC to run my software, I get runtime errors...