Batboard

Rick Rock

Could it be an incorrect receive tone programmed? Sounds like it's receiving, just not the right PL tone to open squelch...

Rick Rock

Start here:
http://batboard.batlabs.com/search.php? ... mit=Search

Rick Rock

Batwings21 wrote:Second question, is an analog spectra/ spectra e a7 control head remote kit compatible with a w7 head, as far as the board, rear plastic etc.

The head itself is not, but the housings and cables are. (Using the newer kit w/ HKN4356 cable, I haven't tried the older style...)

Rick Rock

I've had the same problem- however I found if you leave the RIB off until you power the radio on, it works fine. After you program, the same thing will happen, just switch the RIB off (once programming is complete and the radio restarts) and the radio will power up normally.

Rick Rock

He's also listing under panter88888 right now...

Rick Rock

How was it 'shorted out'??

Rick Rock

The ID is actually T83GXA7HA7AK which is a 110watt securenet-capable enhanced control head (A7) radio, and judging by the serial# most likely RSSI and Zone capable.

Rick Rock

Basically you have a D45MJA7JA6AK (that's a J, not a 3, commonly seen error) enhanced feature analog only (non-trunking) 800 maxtrac, most likely a 16-32ch model.

Rick Rock

Dang grounding issues, they'll get you everytime!!!!!!

Rick Rock

MX7000s are VERY easy to wire, and you can always change out the wire for a longer one when needed. the most fun is making sure the wires are clear when you put the upper plates back on the channel! Just a little extra, you can swap out the new bars' slow rotator motors with the older bars' high spe...

Rick Rock

if there is only ONE gold IC, it's *NOT* an "XL" chip... it's either DVP or DES. there is a rubber pad that protects/buffers the secure board... but the part # isn't in the manual that i looked at.... d Are you sure Doug? Because I have a NTN7280A sitting here in front of me with 1 gold I...

Rick Rock

We have a local computer supply store that sells the 2gigs for $16 all day long, no limits, lifetime warranty.
http://microcenter.com/single_product_r ... id=0250132

Rick Rock

Do yourself a favor and get Trend Micro PC cillin. I use it @ work, home, and on the machines I build. The site controls are great too if you need to enact any type of surfing controls, and @ $24 for 3 PC's, you can't go wrong! I get it from these guys- http://www.clearancesoftwareoutlet.com/index.p...

Rick Rock

Unfortunately you have to add the modes first, it's easiest to F8 and use the default setup. Once you have all the channels in, then you can go into zones and separate them out.

Rick Rock

What's the latest ver you tried?

Rick Rock

Disable it with RSS or set your own PW.

Rick Rock

PM sent...

Rick Rock

I have an A4 control head that the volume control does not work. All other buttons function normally. I opened up the head and the capacitors look good. In the RSS I can't change the control head type, it is set for standard. Your problem isn't the head, it's the radio-wide options- it needs to be ...

Rick Rock

I believe I have 1 extra room reserved @ the Drury.

Rick Rock

What model# interconnect board are you using? If it's not a HLN6285, follow the mod on Batlabs to change it over.

Rick Rock

and what's the model#?ID#? That MLM is capable of all the options you are wanting. Do you have an A5 or A7 head to try on it?

Rick Rock

I'm going to stick my neck out and ask the stupid question- which control head is it set for in radio-wide options?

Rick Rock

We know not what you speak of...

Rick Rock

Back to Lonestar?

Rick Rock

http://www.open.org/blenderm/surplus.html#sp_cables

HKN6039A - Power Cable, 110 Watt (Spectra, Astro Spectra)

Rick Rock

I believe they are interchangeable, and, if you're interested, I believe I have 1 floating around here.

Rick Rock

Or do like the rest of us and rid yourself of IE and join the firefox evolution. http://www.mozilla.com

Rick Rock

Well, based on your previous posts that you dumped a CP into it with LAB, you lost all the tuning settings, so you now need to have it re-aligned on a monitor.

Rick Rock

He has been active 2 days ago on the lounge as a viewer, but hasn't posted in months. I have a earthlink email address listed for him.

Rick Rock

Utterly curious- what's the model# from the tag on the unit?

Rick Rock

http://www.Walmart.com prices are falling every day

Rick Rock

On those, the 4th character indicates the bandsplit-

K 136-174
Q 403-437
R 438-482
S 470-520
U 806-870
W 896-941

http://batlabs.com/images/mtsxmod.gif

Rick Rock

The only main difference between te 2 is the smart RIB is used for flashport upgrades. Other than that it uses the same cables, same power supply, and works on all the same radios.

Rick Rock

MX7000 indeed. I have a 58" model that I rebuilt from the ground up- 6 high speed rotators with 100 watt bulbs (4 red 2 clear), front intersects, 4 front and 4 rear flashers, and 4 rear area lights, and plenty of room for more. Not to mention there is never a doubt as to whether to pull over or...

Rick Rock

PLEASE tell me you're not programming from a command prompt in WinXP!

Rick Rock

Yup, everything works correctly, the channel and zones are in english, I unlock it and it's good to go.

Rick Rock

Simple, the toolproofing was implemented by the Florida factory for the US releases- this radio was made in Europe.

Batlabs wrote:Motorola is implementing "TOOLPROOFING" into the MTS2000 radio at the Florida factory beginning 2/27/95.

Rick Rock

No it is a flashport unit, but w/o the annoying Toolproof capabilities, firmware 6.27 flashed 001008-001200-6.

G170/H43 Remote Monitor and Radio Trace
H38/G51 Smartzone Operation
W947/Q947 APCO Packet Data
Q387 Conventional voting scan

Rick Rock

GOOD LUCK! PL decoding is the only thing that will render that squelch tail silent.

Rick Rock

Does anyone have a keyoadable unit that they would be willing to get the part# off of for this? They are easily removed from the bottom side of the unit once the base tray is out of the way... Then I only have to hope MOL still recognizes the part#!

Rick Rock

I don't see anything in there for language.

Rick Rock

I have a MTS2000 VHF (Euro version) bought from a member here that has been working flawlessly. I got a DES-XL module for it, installed it (haven't got it KVL'd yet), and now some of the radio messages come up in another language- RADIO LOCKED comes up as RADIO GESPERRT , and then some other error, ...

Rick Rock

Make sure muting is set to only unmute on proper tone as Jim stated...

Rick Rock

I want to load WIN 98 on it also so I can program older radios.

What radios are we talking about? If they are older units, that maching won't program them.

Rick Rock

Is your receive freq. set to CSQ? That sounds like a typical jedi squelchtail on carrier squelch. Also, what's your receive hang time set to?

Rick Rock

That shouldn't have caused any issues- have you checked the pins on the back of the head itself to make sure none bent while putting it in? All the rev. indicates is a upgrade version, but as long as the main part# is the same, it 'should' be fine... I've not heard of those going bad, I wonder if th...

Rick Rock

Are you saying you switched the backing (HLN6432) and got the error?

Rick Rock

What's the model/ID#?

Rick Rock

Rick Rock

They are discussing having her stomach removed completely. This procedure is not well known, but apparently it has a high success rate. Meanwhile, she has her good days and bad, but no major emergencies as of lately.

Search found 534 matches

Re: Motorola CP200 VHF Blinking red Light

Re: Spectra programming

Re: w7 head and a w9 astro spectra ?

Re: SmartRIB locks down serial bus

Re: What happened to panter88?

Re: Motorola Spectra Fail 1/90!!!

Re: Need to find out some info on a 110W Motorola Spectra $100

Re: What do I have?

Re: MX7000 modification/upgrade question

Re: MX7000 modification/upgrade question

Re: ..

Re: thumb drives

Re: New Ad-Aware 2007 is a mess

Re: Spectra Modes

Re: M1225 programming problem wont read

Re: MTX 8000, H01UCH6DB7_N - keypad unlock

Re: conertacom for MTS2000

Re: Help with Spectra A4 control head

Interesting MTS2000 text issue