Batboard

Dougdeutsch

Thanks for all the comments.

I'm thinking maybe the way to go is to set it up as a DMR networked repeater and forget the analog. Less headaches.

Thanks again,

Doug

Dougdeutsch

Greetings, I'm attempting to get a new system up and running using an XPR8400 UHF repeater. My ultimate goal is to get it working in a Mixed Mode configuration; analog FM and DMR. Is this something that can be achieved with the basic repeater setup or is their some type of upgrade or option I need t...

Dougdeutsch

Greetings, Just became the owner of two XPR4550 mobiles. I am in the process of working through the red tape with Motorola to get the licensed CPS and Entitlement Tool to program them. Since it appears this process take a long time I was wondering if there is anyone in the Eastern PA area that could...

Dougdeutsch

Greetings, I am new to the MTR2000 having upgraded from smaller desktop Motorola machines. I am starting to work my way through the RSS and have been able to get the radio programmed as to frequency and PL tone. I was wondering what needs to be done as far as receiver/transceiver alignment?? The rep...

Dougdeutsch

Greetings,

I am looking for information on what needs to be done to convert a Motorola Micor UHF Repeater currently on 458.xxx Mhz to amateur service.

Thanks in advance.

Doug
KG3I@ptd.net

Dougdeutsch

Thank you!!

Dougdeutsch

Greetings, I have been reading some of the posts regarding narrowbanding and have a few questions. I understand that in 2013 the narrowbanding will take place. My department currently has MT2000, HT1250 and HT1000 radios that will program with the RSS to 12.5 Khz. Question #1 - Our County has no pla...

Dougdeutsch

Hi,

What model mic should there be on an A7 VHF dashmount Spectra?

Thanks,

Doug

Dougdeutsch

Greetings, I am hoping someone can shed some light on a problem I am having trying to program a MT2000 UHF Model H01RDD9PW1BN. A friend purchased the radio off Ebay. I was able to read the code plug with R06.05.00 RSS. The radio origionally had a trunk system programmed and only one conventional cha...

Dougdeutsch

Hi All, Well, It has happened to me; something went south while trying to program an HT1250. Now the display shows "Eprom CS Error". I have read the threads and tried what has been suggested but to no luck. Is there anyone on the board that can fix this radio for me?? Any help would be gre...

Dougdeutsch

Hi,

Does the MSF5000 100 watt repeater use the same power supply as does the MSR2000 100 watt repeater?

Thanks in advance,

Doug

Dougdeutsch

Hi,
Thanks for the adde help.!!

Doug

Dougdeutsch

Hi All,

How does one adjust the squelch setting on a Maratrac radio? I am aware of how to do it on an A9 control head but the control head on this Maratrac does not have a squelch button.

Is it strickly an RSS adjustment or can it be done at the control head?

Thanks in advance,

Doug

Dougdeutsch

Greetings All, I am trying to setup the scan list for a VHF Syntor X9000 radio. I have the modes programmed as "Operator Select". Once I am out of the programming I have tried to setup the list using the control head buttons. The problem is the radio will receive on Channel 1 with the scan...

Dougdeutsch

Hi All,

Can anyone recommend a shop that still does repairs on Minitor II pagers?

Please respond directly to "W3IIY@ptd.net".

Thanks,

Doug

Dougdeutsch

Hi All,

I just became the owner of a Desktrac UHF repeater L44SUM7000BT. It won't power up when I plug it in. I noticed the 2 DB25 connectors on the rear. Could it have been used (cotrolled) remotely?? Any other thoughts would be greatly appreciated.

Thank you!!!

Doug in PA.

Dougdeutsch

Hi All,

What exactly does "Error #56 Radio Code Plug Error" mean?

Thanks in advance,

Doug

Dougdeutsch

Hi,

I recently became the owner of a siren unit HLN1185B that came off a Spectra system.

I was wondering if the unit will work with a Syntor X9000 system if I use the correct cable to connect the HLN1185B to the Syntor X9000?

Thanks in advance for your help.

Doug

Dougdeutsch

Greetings, I am attempting to reprogram a frequency in a dual head Spectra system. I can program the radio and the front control head OK but how does one go about making changes to the rear control head? Since there are two control cables and one needs to be pulled to plug in the programming cable. ...

Dougdeutsch

Hello All,

I am looking for someone to look at my Sytnor X9000. It has a transmit audio problem.

Thanks,

Doug

Dougdeutsch

Thanks for the help.

Yes, the "Scan" button is programmed for scan. Not sure about the other setting. I will check it when I get home.

Thanks again!!

Doug

Dougdeutsch

Hi All, I have a VHF 110 Watt trunk mount A9 Spectra that I use for ambulance/rescue work. The radio appears to transmit and receive OK when it is in a non-scan mode. I have noticed however that reception stops if I engage the "scan" button during receiving a transmission. If the scan is o...

Dougdeutsch

Hi All,

I finally got a chance to install a VHF Syntor X9000 that I purchased a few years ago as a spare.

When I got it all hooked up, the radio transmits on frequency but the transmitted audio is distorted.

Any help would be appreciated.

Thank you,

Doug

Dougdeutsch

Hi All,

I am just curious if it is common for the blue display on the Spectra head to act goofy in cold temps? The temps here in eastern PA have been banging around "0" for the last few days. The radio seems to receive OK but the display is not right.

Thanks in advance,

Doug

Dougdeutsch

Hi All,

Thanks for your comments.

We have had the HT1000 and the MT2000 for many years now but they are getting harder to locate.

Maybe I will hit it right and some area will be going trunk and want to get rid of a bunch of HT1000's or MT2000's.

Really appreciate the comments!!

Take care,
Doug

Dougdeutsch

Hi All, The ambulance company I work for is in the process of planning to be part of an accountability system in our coverage area. Because of this, I am trying to get a feel from you folks as to what kind of HT's are out there today that are as dependable at the MT2000. We had a few 1250's and were...

Dougdeutsch

Thanks to all who responded. Someone has been nive enough to offer me assistance with my Spectra.!!

Thanks agan,

Doug

Dougdeutsch

Hi,

Still having problems with the VHF Spectra i bought.

Would changing the code plug get rid of the FL01/90 and FL 49/90 codes?

How hard is it to come up with a blank code plug?

Tnx,

Doug

Dougdeutsch

First, thanks to all of you who told me about the ignition sense line. I applied power to the line (pin 5) and the radio came to life. The life however I would liken to that of a medical patient on life support. When the display came on it went into the "self test" than "FL 01/90"...

Dougdeutsch

Good Morning All,

Many thanks for all the help.

Will look for the pin out for the DB15.\

Thanks again,
DOug

Dougdeutsch

Hi, I am kinda new to the Spectra radio. I recently purchased a 100 watt trunk mount VHF radio with an A7 control head. The cable that came with the radio had a DB25 male connector on one end and a rectangular pulg on the other where it attached to the control head. Coming from the control head ther...

Dougdeutsch

Hi,
First, thanks to all of you who have sent comments about my Syntor X9000.

Where can one get a blank code plug??

Is there a particular part number?

Thanks,

Doug

Dougdeutsch

Hi, I recently purchased a Syntor X9000 VHF complete radio from a fellow on Ebay. It was advertised as having a frequency range from 144-174 Mhz. When I received the radio I attempted to read the radio code plug. The RSS would only allow me to proceed if I selected the frequency range that ends at 1...

Dougdeutsch

Hi, A while back I purchased a Syntor X9000 VHF 110 watts mobile with the siren package from a fellow here on Batlabs. I finally got around to playing with the radio and have a problem. The programming of the radio went without a hitch. It receives great BUT I have no output power when the mic is ke...

Dougdeutsch

Thanks to all who responded.

Doug

Dougdeutsch

Hi,

How does the motorola flat rate system work?

Tnx,

Doug

Dougdeutsch

Thanks to all who offered help.

Much appreciated,

Doug

Dougdeutsch

Hi,

I have a VHF Visar that beeps as through it had
a low or dead battery even when the battery(s) is fully charged.

The same batteries work fine on my other Visar's.

Would appreciate any help,

Thanks in advance,

Doug

Dougdeutsch

Hi,

Recently purchased a Motorola mobile charger, PAC-RT Model
TDN9816A.

The power plug has three wires; red, black and white.

I know this is a dumb question but what is the white wire for?

Thanks in advance,

Doug aka "cindyd1@enter.net"

Dougdeutsch

Hi Everyone, Is it possible to send a fax over the Nextel Network using a Motorola i90c (or any other) Nextel phone? I have an application where I need to send a fax from the field. Does Motorola make a cable, adapter, etc to fit the bottom of the i90c and run to a faxing device? Many thnaks in adva...

Dougdeutsch

Hi,
I am looking for info on how to use the little programming key that can attach to an MT2000 functions.

Thanks in advance,

Doug

Dougdeutsch

Need some help from someone familiar with programming the MT2000. I recently purchased a used UHF MT2000. I had some problems programming it but was able to get it working as programmed. I went to make some changes when the error code F01/82 came up and the radio crashed. I read the article about to...

Dougdeutsch

Hi, I am trying to program Motorola Spectra's VHF and UHF that have front and rear heads. I got the cable layout from batlabs.com but which of the 2 DB25 connectors does the programming cable attach? These are the high power units with the seperate power connector. Please send response to me at &quo...

Search found 43 matches