Batboard

KH

I searched for him, seems he hasn't posted since Christmas last year, and that was a post edit.

Anyone know? He was a smart guy.

KH

See if you can disable per-emphasis during the 4 sec the tones are going out. I asked rec3ently about a preemphasis disable on a Moto mobile and it turned out it had it, programmable input.

KH

I think its on the verge of out of lock on that freq.

Bet it doesnt do it on 816.

KH

Dang Bruce that's a big ole NO.

Thanks!

KH

Shoot I don't know, it's in Kansas and I'm in GA. I guess it's one or the other, right?

KH

Will it do display(digital) paging? I know it will analog 2 tone, etc...

Thanks!

KH

I have a dealer who wants to link using 1225 mobiles, and send 2 tone paging thru to a high power station. Preemphasis will distort the tones, anyone know how to diasble it?

Thanks!

KH

KH

Fiberglass antennas always get hairy. Metal antennas never get hairy. I like DB4xx series meself.

I have replaced the coaxial cables on DBs before(salt/corrosion environment). I'm not sure they're available anymore since Andrew came in.

KH

You didn't mention whether you plan to use tone or DC termination, or an IRim box. If tone, here's a document---you also didn't say if they were 760G or just 760...at any rate, this sheet ought to get you started in the right direction. You do have KCT19s I hope? KENWOOD TK-x60 G-Series  CPI TTP1 T...

KH

Cmon man, what are you wanting to do? Are you transmitting? On both? One? How far apart horizontally and vertically? How high? How high other stuff around your antenna(s)? You on a mountain or in a hole?

Details, brutha.

KH

I mentioned before my new boat's marine antenna is GONE. As in broke slap off and a piece of white rg58 is wrapped around the mount. Today I notice AM/FM reception fade, start looking---there's a goofball 2 into 1 box lookin like it's dual function antenna---i.e. junk. How do I solve this? I can fix...

KH

Duracomm LP-14 can be had from Hutton. I use them on Vertex bases all the time. Do NOT use any power supply wit Yaesu written on it. They stink. Well, they used to stink, but then I replaced them.

KH

You're in Colorado, so perhaps this system will go on a tower on a mountain? There was an 800mhz system here a long time ago that had a really high gain(12 db Bogner) antenna on a 1700 foot tower. When you got close to it the narrow beamwidth shot right over your head---you physically look up at the...

KH

I understand that. So I guess the FCC is just assuming there will be X amount of line loss so instead of making them both the same, they allow more output to give the umph through the cable. I think? You have to calculate and supply output and ERP on your license application(well you supply it to t...

KH

Also note that those sticks have a rg8 type pigtail with a MALE N conn., so you need a FEMALE N connector for you coax cable.

KH

Please tell what xxx is.

KH

Keep in mind, there are 2 MFBs, 4505 for 450-460, and 4605 for 460-470. You really really don't want to use the wrong band antenna---trust me, ok? :o 8) I use them all the time and they're good, tough little sticks. Ditto on the 1503. Seems Maxrad makes really good 450 stuff but their hi band stuff ...

KH

I just asked the factory, all of the above.

KH

I'm with bernie. I generate with the gen port of my 2600, spectrum analyzer on the 1500 antenna port, signal strength meter on the meter selector. After I align it I throw my big M isolated T inline and check for desense. If none and the loss is ok, then all's well for me.

KH

DO you mean you are looking for a new freq for a customer or the customer's existing freq? If new, then you need to use a coordinator.

http://www.landmobile.com is FIT.

KH

Call the factory, dude. 8002276772, follow the prompts to cellular with 2way, such as nextohel.

KH

"or call customer service at 611" Did everyone know that customer NOTcare at Nextel is totally farmed out? They don't work for Nextel. For a while I had the custcare pretty edumacated, and actually troubleshooting problems, instead of taking blind potshots at the billing system and dorking...

KH

http://batboard.batlabs.com/viewtopic.php?t=17970

KH

KH

n5tbu wrote:KH you did a typo...it's 2175hz.

Naw, it's 1590 dammit!

KH

That sounds like an interesting potpourri of freqs. I'll run that thru the TX RX intermod software Tues. And report back. Simple math already tells one that it is a complete $&*&%^*UP. APCO did this to me---I have 2 repeaters, PW class. APCO licensed a city govt. output on the input of 1 of ...

KH

I think I read that the other guy is simplex 155.2200 and you're on a repeater pair at 155.205. What's the other side of the pair and is the 155.2050 your repeater input or output. If 155.2050 is indeed your repeater output, then I'd start with detuning the base front ends until they can hear your r...

KH

Sounds like you have a satellite receiver system to me. 1275 hz(the high beep) is commonly used in voting comparator systems as well as in tone remote setups.

KH

There's a guy out of Panama City, Precision Communications, I got Maxon prog stuff from. Name's John, dig him up.

KH

Good job, Max-trac.

KH

I put up an FRX450---once. The radiation pattern greatly resembled that of a 50 ohm dummy load.

http://www.cushcraft.com/thumbs.asp?id=22

KH

George you missed the first post. They're on an itinerant and so is the guy down the street. And they PAID bearscat for coordination, because 'scat was cheapest. Well, dey aint no coordination fees with an itinerant. So I think the bearscat SALESDICK shafted kmoose's co. By omission of facts if nutt...

KH

I suppose there's no flash firmware upgrade since it doesn't say FlashPort on it...jeez... "Got good news and bad news, Alan." says KH to the customer. "Ok, whats the good news?" "Your 20 odd HT1000s will do everything you wanted." "Great. The bad news?" "...

KH

I hate those things. They used to have their own tech support number on the bottom...

KH

I say we raise funds to bribe an admin to delete forever your hideous digital avatar!!!!

BOO IDEN, BOO IDEN, BOO IDEN....

KH

What xmo said, AND who set up the function tone in the termination panel, are you sure it matches the function tone coming from the remote for mode change, and have you checked 3 times that the cable pinout from the panel to the desktrac is all correct? And that the programmable connector pins are s...

KH

Hey does anyone know much about user programmable scan? Example, can one program priority channels that way? These radios do NOT have displays.

Thanks for any help.

KH

KH wrote:BEarcom licensed them on an ITINERATE freq in Northern Alaska fer cryin out loud. BOOOOO.

Utter laziness, or greed, or both.

KH

He sent me all his stuff on PM and I scoped it out on fcc.gov. Bearscat dorked his company but good.

KH

BEarcom licensed them on an ITINERATE freq in Northern Alaska fer cryin out loud. BOOOOO.

KH

Yeah. Dude, you need to tell someone that Bearcom dicked you guys over and get a real pair coordinated.

Bearcom sux azz.

KH

Oh hell the Captain OBvious really tickled me!

Uh, pcx---ALL YOUR REPEATER ARE BELONG TO US.

KH

We built one for a local tech school police chief. I'll take pics sometime. This thing runs 40 mph.

KH

Thanks charlie. All's not lost as there's only a select few who need the scan stuff, sorry guys you gotta tote the 1000s. The emergency button sending MDC (not sending in this case) I dunno what I'll do.

KH

We just picked up these folks after they've gotten thoroughly disgusted with 2 other shops...

KH

So the 4 channels won't do priority scan, and it looks like they won't do MDC either...

Now, how do I tell this customer that his older HT1000s will do wht he wants but his new(er) radios won't?

Or, who knows how to diddle this codeplug into thinking it's a 16?

KH

bonus question---what's 01-80710T66? I know....

KH

I lost. It won. Why can't I set the cottonpicking priority 1 and 2 boxes??? They're grayed over.

model AAH25RDC9AA2AN, 2 different 1s, 1 ver R01.00.00, the other R04.00.01.

please help........

KH

And Motorola built WHAT starting with a Q, jim?

KH

"full-duplex comms by using a PTT-controlled relay"

...WHAT???????

Funny as hell, that part.

Search found 161 matches

where's Nand???

MCC 5500 paging ?

cdm1225 pre emphasis disable?

I think this is hokey???

HT750 scan help