Batboard

RadioGuru116

I have that as the .exe file. It must not me loaded on my machine right. Thanks for the reply

RadioGuru116

I have what I thought was a Maxtrac mobile. After trying to read the radio with numerous different versions of Maxtrac software with NO luck, I think I have a Radius with a Maxtrac head. Not actually knowing, and not sure if I have the right Radius mobile software, does anyone know what the software...

RadioGuru116

Its currently on F1-470.8375 F2-470.8625. Im looking to get atleast one channel on 470.975. The second 471.175 if possible

RadioGuru116

If you got it to work as a stand alone unit, could you possibly PM me the wiring? I have one that I want to use and NOT have to use my Maratrac also

RadioGuru116

My brother in law recently found a Minitor 2 pager with I believe the frequency of 470.8375. Is there an easy way to make this pager 470.975? Or would I need the correct RF board with that freq? If thats the case, does anyone have one? Any help or suggestions appreciated

RadioGuru116

I knew I was forgetting something! It couldn't have been as simple as plugging the speaker wires back together. I have a few pre made 16 pin connectors with the jumper in already. Thanks for the refresher. Been a while since I played with one if these.

RadioGuru116

I have a low band Maxtrac that I turned back into a regular mount. The problem is now I have no audio from the front speaker. Is there a simple way OTHER THAN using an external speaker to get sound back?

RadioGuru116

I came across one of these that was used to control a Whelen Edge. I have one on my truck which is why i got it. Does anyone have a wiring diagram for this unit? Do I need the Maratrac sirem controller to use it? ANY help appreciated

RadioGuru116

Thanks AS! I actully found that post last yesterday. Of course after I made mine. Thanks for the help

RadioGuru116

Sorry, for an XTS3500R

RadioGuru116

Does anyone know what the model number for the DES-XL module would be? Is it the same as the Astro Sabers? Would it possibly be NTN1153c? I looked on the site but didnt see on the encryption page a number for the XTS's. Ive been out of the game for a while and Im just starting to get back into it. I...

RadioGuru116

OK. Thanks alex. Hows my old XTS3K doing? Still have it?

RadioGuru116

Can the alignment instructions be found on Pyramids web site? Also, what sort of meters will I need to properly align the radio? Please Let me know. The department I work for has a few and is getting a few more but they have been sending them out for alignment. Thanks

RadioGuru116

A littel off /\/\ topic, but has anyone had any luck with using the Batlabs designed SVR200 cable? Can I use just a regular headphone plug and a DB25? Any feedback is greatly appreciated.

RadioGuru116

Didnt think so. Thought maybe there was a way to hack into it and change it to do more channels. Thanks for the reply.

RadioGuru116

Silly question. Is there anyway to make a HT1000 do more than 16 channels?

RadioGuru116

Your other option is try to get in touch with MrFlashport. I had the same problem with y MTS2000. I got a FAIL 01/93 and he was able to fix it for me. Try him before you send it to Mother /\/\. Good Luck.

RadioGuru116

AAAAARRRRGH! Im gonna be really pissed if I cant fix this radio. Anyone have any other options? PLEASE HELP!!!!!!

RadioGuru116

I am able to get part of the 6.07 software. All but the Runtime.odb file which unfortunaltely I NEED! Would an .odb file from a different version of software work? No, right?

RadioGuru116

What if I loaded a MT2000 codeplug into the radio? Would that force it into a restore?

RadioGuru116

Is there a way to do it with Depot Tool? Picked up another MTS2000 (God help me) with a FAIL 01/93. Any help would be appreciated.

RadioGuru116

Speaking from experience, I know that the SVR200 works flawlessly with the cdm1250. I dont know if it would be any different with the 1550. Hope this helps

RadioGuru116

Well, I had already tried the security screw trick and one was loose. I tightened it and no change. I am going to have to check the internal mic gain also. Thanks again for the replies an I will let you know how I make out.

RadioGuru116

I am having an audio problem with my ASIII. Radio works fine with the speaker mic but when I have the speaker mic of and push the PTT button, no audio comes through when I talk. If I tap on the radio, you can hear the tapping, but no audio when I speak. Any ideas?!?!?!?

RadioGuru116

Well, I got the right key thanks to wavetar. My newest problem is that it only recieves sporatically. I get squelch "shots" and only recieve part of the conversation. Any ideas anyone.........

RadioGuru116

Well, the radio is unlocked. I need to know if the key i used to unlock matters even thought the control channels and all that are right?

RadioGuru116

I know the system key for the system I want to trunk. How do I unlock the radio with the key so I can change Sytem ID's? Can anyone help?

RadioGuru116

OK. I know the 2 system ID's that I am going to be using. The question is, how to I change the default 0001 to the ID that I need?

RadioGuru116

Besides using Hex editor and doing all that work, is there a simpler way? Obviously obtaining a valid key, but is it something as simple as typing in a code that you already know?

RadioGuru116

I recently purchased a GTX 800, and I am trying to program it. Almost every page I go into, is a view only. How can I change things such as the control channels, talkgroup ID etc....? Can someone help?

RadioGuru116

Ah, forget these Maxtracs, I wound up buying a GTX mobile. Any goods bad or indifferents on this radio? Anyone?

RadioGuru116

Where would I find this firmware upgrade? Is it a simple process or is there equipment that needs to be changed?

RadioGuru116

I recently purchased a maxtrac on ebay. The seller states it is capable of smartnet and type I. I read the radio and there is nothing in the codeplug that says anything about smartnet. Can anyone help? the model number is: D35MWA5GB6AK. First three of the serial number are 438 and it says it is Vers...

RadioGuru116

I wouldnt use the DOS window to programm. Your better off just using the slow computer. I use an old toshiba satellite with WIN95, and yeah, its slow programming, but id rather it be slow than have a very expensive paper weight.

RadioGuru116

Thanks for all your help......again.

RadioGuru116

Thanks for the help. I thought they might be, but I just wanted to be sure.

RadioGuru116

Whats the difference between smartnet and type II trunking? Is there one?

RadioGuru116

RKG, thanks A LOT for your help. Worked well.

RadioGuru116

I need to know if there is a program to convert like the subfleet ids into hex ids for a trunking 800 radio. In other words, I know a few such as

59376 is E7F
49776 is C27
62448 is F3F

I need to know if theres a way to convert other such fleet ids into hex. PLEASE HELP!!!

RadioGuru116

I recently purchased a Maxtrac 888 on ebay. I need to program the radio but was told that I need the "motorola key" for it to recieve. I have all the freq's and fleet id's, but do I need they "key" for it? Someone help.

RadioGuru116

Yeah, I have an A7 and it does do PTT ID, I just needed to do two different ID's. Oh well. Thanks for the help.

RadioGuru116

Two questions: 1. - Is it possible to have more than 1 MDC ID on a Spectra and 2. - Will a Spectra do MDC ID display. Anyone with info?

RadioGuru116

If memory serves me correctly, the MT2000 will scan 15 channels. As Kurt said, after you do your first 8 channels, hit the "page down" key and that will bring you to the next 7 channels. Good luck.

RadioGuru116

It is the 450-482 band split and all freqs aer in that range. It is a sparatic problem so Im not that worried about it. Thanks for the info anyway. I knew it was a VCO problem, I just thought there might be an easy way to fix it. Thanks again.

RadioGuru116

How do I correct a FAIL 001 on a Spectra? Please help.

RadioGuru116

I have Max Lab. I didnt think about trying it that way. I wuold still have to install a new prom though right?

RadioGuru116

i believe they do use Type II. I was hoping i would be able to use it. Oh well I guess.

RadioGuru116

I have a Maxtrac LS radio and need to know if you can put Fleet IDs in there so I can scan the local PD in my area. I have all the freqs in programmed already, but I want to be able to set up the seperate pcts and the fire marshal. Someone PLEASE help!!!!!

RadioGuru116

I have a spectra with the 403-433 split currently on ebay. It is the A5? model (rotary knobs). I am looking for one with the 450-482 split. Let me know if you want to trade.

Search found 49 matches

Re: Radius with Maxtrac head

Radius with Maxtrac head

Re: Minitor 2 RF Board

Re: Maratrac Siren Help

Minitor 2 RF Board

Re: UN-Remote mounting a Maxtrac

UN-Remote mounting a Maxtrac

HLN1262A Lightbar Controller

Re: DES-XL Module question

Re: DES-XL Module question

DES-XL Module question

Batlabs programming cables

HT1000 Question

Audio problem with an Astro Saber III

GTX mobile system key

GTX 800 Mobile Programming. PLEASE HELP!!!!!

Maxtrac 800 question

Smartnet question

800 hex id conversions

Maxtrac 888 Motorola Key questions

Spectra and MDC

FAIL 001 Question

reply

Maxtrac LS programing question