Batboard

moustache

Thanks

moustache

Hello,

I have a Motorola Ht 1250. When I turn on the radio I keep getting three short beeps.
When I touch the radio. Push the ptt or change the channel the beeps stop. Does anyone have an idea as to why this is happening.

Any help is greatly appreciated.

Thank you in advance..

moustache

Thank you very much for the help.

moustache

Hello, I own several Ht 1000's I was recently looking at a mts 2000.
can someone please tell me how this radio differs from the ht and can it be programmed with the ht software.

As always any help and information is greatly appreciated.

moustache

Hi, the modification to the radio is the same one that is suggested on the board concerning the jumper wire and the pac using the transmit line to the led as a connection point. The post was under the miodel specific info. Just wondering since it worked with te clam shell head if a different cabl;e ...

moustache

I was wondering if a maratrac with a clamshall head modified to work with a pac rt, would work the same with the advanced head or would something have to be changed? I was told if a clamshell / transmitter had the modification for the pac rt, it would have to always be used with the pac. Any info is...

moustache

Thank you all for the help...

moustache

Hello, I was able to get a control cable and clam shell head. The only problem is that someone cut the end off the cable that goes to the clamshell. Can anyone tell me what the pin numbers are to which colored wire. I have some pins but no idea of what geos to what. I also have a complete cable from...

moustache

Hello,

I don't know if this is the correct place to post.
I am hoping someone could help me. I have two Maratrac radios with the a-7 head.
I am in need of two control cables. If ayone has one laying around or knows someone who may Please let me know.

Thank you for taking the time to read this.....

moustache

Thank you very much for your help.

moustache

Hello, I was given a maratrac with the clam shell head. eight channels a/b selector. I just wanted to know if this radio can hold more than 16 channels if I was to get an A-7 head for it. Also to do a scan feature I was told only eight channels can be put in and the a/b selector used as the scan kno...

moustache

Thanks Will I appreciate the help..

moustache

Brought one on ebay for two cdm 1250's. No instructions were included aside from one end goes in here and the other in there. Does anyone know how to make this cable work with two cdms with seperate antennas. I guess I am asking what the pins should be set to on each radio. yes we are licensed for r...

moustache

Thanks to everyone for your help and input.

An extender application is what I am trying for...

moustache

Hello, I have a cdm 1250 in my work truck and have a second unit that I just purchased. I would like to hook them up as a repeater so that I can use them with my portable radio a (ht1250) I am not a radio tech but have a basic understanding of how other repeaters work. I was hoping someone could tel...

moustache

thanks for the help

moustache

Thanks, Would anyone have information on the different ways a cdm ht 1250 can be programmed to scan. What unassigned means and any further info would be appreciated. My work has the radio programmed to scan everything when the button is hit and I have to keep hitting the delete button to get the cha...

moustache

Hello, according to the Motorola site my kit number4802 is for the GM338, GM399, GM398 series radios. Can anyone use this kit and possibly trade for a cdm 1250 kt which I believe is the 4802A.

Any help is appreciated..

moustache

Thanks to everyone who replied. on the instruction sheet that came with the kit it says RLN4801/RLN4802.

moustache

Thank you

moustache

Hello,
When programming the scan list for this radio. an option is "selected"
Can anyone tell me what this means, any info is appreciated.

moustache

Hello I purchased a remote mount part number 4802 for my radio. The part that attaches to the transciever seems a little small and the radio doesn't work when hooked up. does anyone know if this is the correct part? Also do I have to have the raio programmed a special way to operate with this remote...

moustache

Sorry mistype I appreciate your help very much.

moustache

Thank you Will U appreciate your help..

moustache

Hello, I have a ht1000 vhf.
Can anyone tell me what the squelch values should be 26,27,28. The radio was programmed and it doesn't seem sensitive enough. I believe it may need to be set down.

Any information is greatly appreciated...

moustache

thanks

moustache

Hello, I have in my garage several of the old Motorola Handi Com 70 portable radios.( the brick) I also have several gang chargers and single chargers. The radios worked really well. I don't have any batteries for them and I kbow they are old. Used in the late 70/s early 80/s. I was wondering if any...

moustache

Hello, I purchased a used car charger for my HT1000 Model number TDN9816A. It has a plug on the back with two rows of holes six holes all together. Three pins are attached . Two pins on the upper right and one on the lower left. Does anyone know which are power and ground. I didn't get any wiring in...

moustache

Hello, I spoke to the programmer, We walked through the add delete sequence and after checking his notes he realized that he accidentally programmed my select button as an exit button. Hope this sounds right. he is going to make the correction for me. He says the software for the cdm 1550 and 1250 i...

moustache

I was told by the programmer that he activated everything for user selectable scan. He also tells me that he was able to add or delete channels before he sent the radio back to me. But I can get to add delete channels on the menu and priority. The radio doesn't give me a message saying channel entry...

moustache

Hi, Played around with my radio and this is what I get. Add channel, delete channel, selcted channel. When I press the select button again it just shows the channel I was on . And still the channel I want to get rid of is on my scan list. Is it possible there was a problem with the programming? Just...

moustache

Thanks,

That helps a lot, I checked my book and it wasn't clear at all.

I really appreciate your help.

moustache

Hi thanks for the reply, I hope I am not sounding crazy, but how are you adding and deleting?
Do you go to the channel you want to delete or add first and then access the scan list menu?
I can't tell what is on my list and what isn't. what sequence should I follow?

Sincerely

Andy

moustache

Hello, My radio was programmed for user selectable scan, or so I was told. My short cut button number one is what I would use. When I tap it I get the following, Add channel, delete channel, priority. My short cut three button toggles between three separate lists of frequencies. I think I read in a ...

moustache

Thanks for answering my post, I will check into it.

moustache

Hello, I work out in the field with the local railroad. I read someplace that a cdm1250 could be used in the field in place of a portable radio,by using a case and a portable power source/ booster pack. Because of different work locations I don't always have access to a vehicle or other power source...

moustache

Thanks for replying to my post.
For the user adjustable settings would you know how I would do this?

Sincerely

Andy

moustache

Hello, I have a Ht 1000 in the vhf range. It doesn't use pl on any of our radio frequencies. My problem is that the radio keeps breaking squelch. I can't even carry it at work right now or use it because of the squelch issue. It isn't the location that I work in because the radio does this where eve...

moustache

Hello everyone, I sent a portable radio out to Will Marrtin and he was kind enough to do some repairs on it for me. I last heard from him on the 11th where he said my radio was fixed and he would be sending it back. He did mention that he was having some internet problems. If anyone has any contact ...

moustache

Hello everyone. I am trying to pitch an idea to the higher ups at work. I remember seeing a long while ago, that someone had made a portable repeater using two maxtrac radio's and enclosing the entire thing in one of those plastic file boxes with a handle on it . ( I believe his problem was trying t...

moustache

Hello,

is there anyone out there who can check the allignment values of an Ht 1000 for me.
i am in Ct and can't afford the 55.00 it would take for a 30 min check up.
Any help is greatly appreciated.

moustache

Thank you for the help. just for future reference. When I clone a radio, does this effect the value of both radio's or only the radio I am cloning. Sometimes the guy's at work will get there own and ask me to clone it, I don't mind doing this but don't want to have to take my radio into the shop to ...

moustache

Hi Will,

Thank you for answering my post.

I have two radio's one I cloned and the other I used as the radio that I cloned from.
Is there anyway to tell if the value has changed or must I take it into a shop.
I did put two different antenna's on this radio and got the same result.

moustache

Hello there. I have an HT 1000 radio. I have noticed that the radio does not seem to be as sensitive as other portable radios that my coworkers use. I can pick up most transmissions but I hear things coming over their radios than mine isn't picking up. I was wondering if anyone had a cause for this ...

moustache

Thanks

it's a 16 channel and all I have is the clone cable, no software or anything.

moustache

Thanks,
it's conventional. How would I remove the channels or zone that I do not wish the user to access?

Any info is appreciated.

moustache

Hello everyone, I have a programming question regarding cloning. Does anyone know when you clone an Ht 1000 if there is a way to omit one or two transmit channels or any channels at all. I know its a long shot but I had to ask.Our department wants to clone a radio or two for a subcontractor, but doe...

moustache

Hello, I was hoping someone would have a phone number for Nick Robinson of Fredericton, NB. I sent him a radio a while ago, He was nice enough to offer to program it for me. Our email contact is lagging and I need to contact him to get this radio for work. Any help is greatly appreciated. Sincerely ...

moustache

Hello, I currently have a Maratrac 100 watt mobile unit with the clam shell head. A/b zone knob instead of the squelch knob. The radio is also set up with the PCRT repeater. I have two questions I know you guys can help me with. 1. Can this radio be programmed to scan all channels that are programme...

moustache

Thank You Will.
i appreciate the help.

Search found 63 matches