Batboard

scvfd1204

Thanks for the reply. I have never dealt with 9600 & 3600 baud in the same radio at the same time.

There are no 700 MHz freqs in the system for now, thank goodness, but some sites are rebanding. What is the newest HOST version the Astro Spectras?

scvfd1204

Will an 800 Astro Spectra withe flashcode 5000080004800 follow a Type II Smartnet Omnilink 4.1 CAI system with digital and analog TGs as well as a P25 system and 800 analog conventional and P25 conventional? I can't seem to find any detailed information regarding this. I have dealt with trunking and...

scvfd1204

Jeff, You may be able to figure these out by using audio software such as Audacity, or Cool Edit 96. IIRC, I used Cool Edit 96 to decode QCI in the past, unfortunately, CE 96 is hard to find now. If you want to send me a wav file, I'll take a look. Vernh911_at_ AOL_dot_com Vern Thanks Vern. I have ...

scvfd1204

I am trying to determine the old tone plan that was used in my county a while back. They used QCI to activate the sirens and Plectron tones for the pagers. I have all of the pager tones figured out since they still bang those out with a Zetron 25, but I cann't remember which tone plan they used for ...

scvfd1204

I received the A4 head I found and finally got a chance to test it today. The Spectra RSS wouldn't allow a change to the A4 head. I got it to work, but there was a little trick to it.

Thanks to all of those that helped me out.

scvfd1204

The onfreq HLN6432 reference to (rotary) and (pushbutton) were from the original Motorola documentation. However, in reality it doesn't seem to matter and the jumper differences were actually between different revisions A, B and C of these boards. I see how it can be confusing. When I have some spa...

scvfd1204

Thanks for clarifying that for me Will. Some of this stuff tends to confuse me these days...

scvfd1204

In some of my recent research, I think, from what I have seen/read, that when using an A4 rotary head with either an A5 or A7 spectra an interconnect board is needed for the volume pot to work correctly. The remote interconnect board is the kit I have is an HLN 6432B. The onfreq spectra info site me...

scvfd1204

Not trying to resurrect on old thread, but I saw these pictures and a few others online when I bought my 98 Mountaineer last year. The 14" Havis Consolidator fits perfectly, and the universal mounting brackets work great to secure it to the remainder of the factory console. I have pics of mine ...

scvfd1204

Thank you sir.

Now if I could just find an A4 head in excelletn shape, I'd be set then.

I already have the brackets for the console to hold the remote A5/7 heads..

Thanks again!!

scvfd1204

Will the HLN6432B remoute head housing that fits the Spectras A5 & A7 heads work with the A4 rotary head? I need to do away with the A9 head in my console to fit more equipment in, and would love to go with an A4 head. I do have an A5 & A7 head, but don't want to use them unless I absolutely...

scvfd1204

Thanks for the reply. OK on the microprocessor. Is this how many of the other sirens out there (Whelen, Carson, FedSig, etc) generate their tones? Would love to replace the hi-lo with Whelen's "peircer" tone. I have some vacation and sick time coming up, and I will definitely be looking fo...

scvfd1204

Does anyone out there know exactly what the HLN1185 amp uses to produce its siren tones? I love the wail and yelp, but that Hi-Lo is not worth it. I would love to find a way to generate the whelen or older SVP style "piercer" tone with this amp if possible. Does this amp use the same style...

scvfd1204

McDonalds drive throughs that have LCD's screens - 110w on VHF.... That'll send most of the order window's terminals completly out of wack... The local McD's here (3 of them) have the newer fancy style LCD touch screens for their drive thru cameras, the "amangers control panel" and all th...

scvfd1204

Disregard. I spent about 15 minutes on the phone with Parts ID on Friday and I now have the part number. The gentleman from parts ID is trying to find an SKU for just the mount itself and when he does, he will call me. The SKU for the thick surface mount with cable is 01-80371A24, list price of 31.25.

scvfd1204

I have seen the many different style of thick surface NMO style mounts offered by MaxRad and others. I used to have an antenna tuning sheet from MOT that had one listed for them with their part number, but I cannot find it for the life of me. Do Motorola have a mount like this in their system? If th...

scvfd1204

I think I have found a part number of 30-80248L01....does this sound right??

scvfd1204

I am running a high power VHF A9 spectra with the HLN1185x siren amp box connected and everything is working correctly. The DEK I have is a HLN1241C. I know the cable that goes from the control head to the DEK is available from MOL, but I dont have a part number, nor do I have any extra sys9000 mics...

scvfd1204

I am trying to locate exactly what items are needed to connect a Siren/PA DEK to an A9 Spectra head, non-Astro. I was trying to piece the info together from several sources of info on the net, and I am beginning to get confused. What is the part number for the cable that connects from the VIP port o...

scvfd1204

I appreciate that. Both of those numbers are showing as available with MOL. I had about a 6 page cheat sheet I made up from the days when I worked in a MOT shop, but it has since disappeared, go figure. I am still searching for the number of the small holders now. I remember getting them by the bag ...

scvfd1204

Does anyone happen to have the part numbers for the MOT fuseholders that use and long glass fuses similar to the ones that go inline for high power spectras? Also, I am looking for a part number on the same style of fuse holder that takes the same diamater of fuse, but a slightly longer one. Also, h...

scvfd1204

Just an update... I have finally finished the claxon system project. After building a small box to house the RT2 from midians a small circuit board for connections, a power switch and a few LEDs, along with a relay connected to the output of the RT2. I have 2 120vac federal signal vibratone fire ala...

scvfd1204

Does anyone happen to know what the tones and timing are for the Zetron 25's fast siren alert tone are? I have a recorded sample from the policeinterceptor site and I have repeatedly tried to analyize and duplicate using cool edit. The sample has a ctcss tone of 141.3 in the background and doesn't s...

scvfd1204

Thanks for the response.

Thats what I thought. I had tried using the radio alone to control the relays for bells and buzzers, but it would never act right.

At least with the tone decoder controlling the circuit, I would think it work work much better.

The BatBoards does it again.....

THANKS!!!!

scvfd1204

Hello all. I am getting ready to install a Midians RT2 in a small project box and connect it to my CDM1250 to activate a relay etc when we get a proper two-tone decode. I know I use pin 11 on the CDM to get the flat rx audio as an input to the RT2. My question in the COR/COS input for the two tone d...

scvfd1204

Hi guys! Just got an 06 Toyota Tacoma for a work vehicle. Of course, the company provides very minimal warning light equipment, which is basically a dim mini-strobe lightbar on the roof. I am in the process of ordering a whelen corner strobe kit and am trying to figure out the best place to put the ...

scvfd1204

I've been to a few remote sites like that. My favorite place to take "green" techs that were assigned to me was up on a 2000 foot TV tower that nested a local ABC affiliate, a FOX affiliate, and a PBS site for UNC-TV. There was also a few FM boradcast stations up there as well. There are s...

scvfd1204

When I was dating my (now) wife, I used to go by her McDonald's and mess around with her when she was working the late shift. Full power from an A9 Spectra blows those little systems out of the water. Even better when I would turn securenet on. A friend of mine lived right behind another local McDon...

scvfd1204

I have an HLN1185D siren/pa amp.

Will this unit work with a regular spectra or is it Astro only?

All assistance is greatly appreciated..

Jeff
Surf City, NC

scvfd1204

Sorry about the delay. I am still in the process of investigating the problem and working on solutions as I go along. I am sure the rear window defogger has something to do with it as well, because if I disconnect the coiled flexible wires on the rear defogger, the problem goes away. Could this poss...

scvfd1204

Would anyone hapen to have the part number for the T-cable?

I'm not sure if that would work, but I havent had a particular setup like this before.

Thanks

Jeff
Surf City, NC

scvfd1204

Thanks for the reply Bruce. What I'm looking at doing is have two seperate VHF spectras in the truck. I want one of them, preferably the A7, to have both a VRS and a Siren unit connected. The communications system in my county leaves alot to be desired, to say the least. What I would like to do is h...

scvfd1204

Hi all. I have a VHF A7 Spectra. What i would like to do is this: I have the dual prt remote faceplate for the radio, in which I plan to install in my vehicle. I have the Sys9000 siren unit as well with the proper cable and such. Is there any way I can have both the Siren sys and somehow connect a P...

scvfd1204

Thanks for all the ideas an info. I have checked all of the grounds, and rerouted the coax coming from the permanent roof mount and nothis has changed. Everything seems to be good at this point except for that darn rear wiper. I try something interesting. I disconnected the quick clips that connect ...

scvfd1204

Hi guys! Got a wierd little problem with my 92 Ford Explorer XLT. I have a 100 Watt A9 VHF Spectra installed witht he Siren/PA Box. The drawer unit is installed in the rear cargo area on the right hand side up against the rear of the passenger side back seat. When I key the radio on various channels...

scvfd1204

LAC-OPS wrote:"There are three basic components to the General Electric refrigerator: the freon compressor, the freon tube....."

Dan Akyroyd, "1941"

My favroite line in the whole movie (but I thought it was five), along with Col. Maddox.

scvfd1204

Rick, I believe that is the model number. Will, As far as I know, the unit had always been paired with the Spectra. The audio path is not "open" per se, seems like the audio section of the PA or EXT RAD function are "hard of hearing" if that makes any sense. If I crank the PA vol...

scvfd1204

Hello all. I have a recently acquired VHF A9 Spectra with the Sys9000 Siren box. After programming, installing and testing the unit, everything seemed to work fine. All radio and siren functions work great, with the exception of PA and External Radio. When I place the unit in PA mode, I can hear the...

scvfd1204

Max, I finally got it to work by building another cable. It seems that that particular brand of 8-pin modular connector did not have quite enough pin contact in the radio plug for the programmer to work. After building another cable using the scehmatic for the Radius/MaxTrac series and it worked aft...

scvfd1204

Just a thought but.... When our county's dispatch center revamped and installed all new consoles and the new VHF repeater, we started having problems with our pagers alerting. It is even affecting our older Minitor II units, as well as IIIs and IVs. The county keeps blaming our pagers, and we keep s...

scvfd1204

Also, a couple more questions. I have some RF boards that will fit the Advisor classic I have the following numbers: NRF4101D (Crystal Data: 62836A30 75986.458, IF of 17.9) NRE6552C (Crystal Data: 52228125X6301, IF of 45.0) NRF4163A (Crystal Data: 62836A26 75978.125, IF of 17.9) AARD4053A (Crystal D...

scvfd1204

Thanks for all the info guys. Sorry It has taken me so long to respond. My computer crashed out on me at the end of last week, and I have just got it back up and running after a complete reformat. Ok, so the Advisor Gold boards do NOT use an IF, so I take the numbers on the crystal (up to the 666) a...

scvfd1204

I have 7 vhf receiver boards from Advisor Gold pagers. I am trying to figure out what frequency they are on. There are no frequencies printed on the crystal other than the following: 50826 666 X6460 C9946 (this line varies from rf board to rf board) Does anyone happen to know what this information w...

scvfd1204

Wolf,

Thanks for the info.

There is only a codeplug for 16 channel UHF model listed there. Perhaps once I get my codeplug files sorted out I can add a few there.

Thanks!

Jeff
Surf City, NC

scvfd1204

I am trying to find a codeplug for a VHF (146-174) 99 channel MT1000.

I am doing a transplant to change the radio from a 16 channel model to a 99 channel model.

Thanks for your help!

Jeff
Surf City, NC

scvfd1204

It is always heartbreaking when someone you know so well, and yet not so well is such a part of your life and they leave us. :cry: I have spoken with Monty countless times, and he was always cheerful, and willing to help me with something. I also got a few good laughs from some of his posts. His kno...

scvfd1204

I've tried to write a saved codeplug to the radio, but it will not work. It gives me the same error as when I try to read the unit "RRO size should be 3 bytes" or something really close to that. I dont really know all that much about firmware upgrades and things like this as far as the CDM...

scvfd1204

Is there anyone out there in batland that can tell me what this error means? When I try to read the radio, it tells me somthine to the tune of "Error RRO Size should be 3 bytes" or something like that. The radio has been working fine for 3 years now with no problems what so ever. It sits i...

scvfd1204

"To expand a little on kcbooboo's suggestion, can you get ahold of another M1225? Preferablly one from a different original dealer. I wonder if maybe someone has "rerouted" the data pin in the mic jack. I have never seen any such done, but I have heard several people on the board talk...

scvfd1204

The cable I am using is a very well made cable of aftermarket descent. It is the same cable I have used on many MaxTracs, GM300s, CDMs, and just about every other similar style Motorola radio that uses the same cable. I have changed the batteries inside the Polaris "RIB" box, but nothing c...

Search found 64 matches

Re: 800 Astro Spectra Question

800 Astro Spectra Question

Re: Decoding Mot QC1

Decoding Mot QC1

Re: Spectra A4 remote head question

Re: Spectra A4 remote head question

Re: Spectra A4 remote head question

Re: Spectra A4 remote head question

Re: 2000 Explorer Console

Re: Spectra A4 remote head question

Spectra A4 remote head question

Re: HLN1185 Siren Tones

HLN1185 Siren Tones

Re:

Re: Thick surface MOT style mounts

Thick surface MOT style mounts

Re: Spectra A9 & DEK

Re: Spectra A9 & DEK

Spectra A9 & DEK

Re: Fuser Holder ID

Fuser Holder ID

Re: VHF CDM1250 and Two-Tone Decoder

Re: Question about interesting alert tones

VHF CDM1250 and Two-Tone Decoder

2006 Toyota Tacoma

HLN1185D Siren/PA Amp

Spectra A7 Siren/Repeater Setup

92 Ford Explorer XLT quirk

A9 Spectra/Sys 9000 Siren quirk...

Crystal Info on Advisor Gold NRD7688A5

looking MT1000 codeplug...

CDM1250 EEPRM HW ERROR