Batboard

GEMOTO

They were available in the EMA market.

GEMOTO

Maybe the site you are affiliated to is in site trunking?

If your radio is programmed as a SmartNet radio it will not show any site trunking alerts.

GEMOTO

The blue dot means the radio is equipped with bluetooth. If the radio did not come directly from the factory, verify that the module is in place.

GEMOTO

I have a CF-52 with the same problem. I heard that if you use windows to manage the wireless connection vs. the Intel Pro Set software it may work better but I have never tried it.

GEMOTO

What radio ID are you using? Only some will allow you to listen.

GEMOTO

The RSSI values vary from model to model:

Astro Spectra/XTS3000/Astro Saber
Max = 89, Lowest useable = ~35

Astro 25 Series XTS/XTL2500/5000 etc.
Max = 148, Lowest useable =~30

APX Series
Max = 174, Lowest useable = ~3something

MCS2000/MTS2000 (I forget, have't used these radios in a while)

GEMOTO

You need at add a "Site Display/Search" button, when pressed it will display the SmartZone site number or the custom alias you have provided in CPS.

The Site button allows you to lock your radio to the site you are currently affiliated to and will prevent it from roaming to other sites.

GEMOTO

Would anyone happen to have the part numbers handy for the metal clips and screws that are used to mount equipment in the older style cabinets?

Thanks!

GEMOTO

The Pager Geek wrote:Astro Modems... oh how they worked so well for this...

tpg

They are making/selling them again under a different part number.

GEMOTO

Thanks!

GEMOTO

Need to order a few of these, can not locate the part number and parts id is closed for the weekend. This is the cable with the red, yellow and balck cables that plugs into the control head.

Thanks!

GEMOTO

I have played with the ACK (Advanced Conventional Key) extensively. It does not even come close in usefulness and functionality to an ASK (Advanced System Key). It will only allow provisioning for OTAP (Over The Air Programming) and some form of radio inhibit, which I can not recall at the moment. W...

GEMOTO

alex wrote:I've heard it's confirmed the stations already do Analog... When they first came out that was not the case.

I wonder if this means that they are now going to drop the axe on the Quantar...

-Alex

Very soon.

GEMOTO

Quantro has two powersupplies ans is 225W. A Quantar has one power supply and is usually 110W and lower.

GEMOTO

Is there any update on the availability for purchase? At APCO 2008 I had heard they would be available in 2nd quarter 2009.

GEMOTO

Its very similar, almost no difference. Takes the same amount of time to do an ASTRO as an ASTRO 25.

GEMOTO

Before using any radio it's best to align it for deviation, power output, frequency error etc. I usually "touch up" my radios once a year or so. Not having the equipment is not an excuse. Think of this in terms of having a car, every X thousand miles a tune-up is needed to keep the car wor...

GEMOTO

A place to start is a complete alginment procedure.

GEMOTO

RSVP's

Code: Select all

Attending:
GEMOTO
RKG
alex + 3
dagwag77
toyradios
n1oty + 4
jwb8734
PJ

Total: 15

[last updated by alex @ 1443hrs 1/29/09]

GEMOTO

This is a frequency list that someone had posted around 2004 or so. I don't remember who but I had saved it. National Bat-Labs Frequencies Name Frequency Service PL Green 151.880 MURS D143 Blue 151.940 MURS D143 Red 154.570 MURS D143 Name Frequency Service PL xband 146.5750 Analog Ham ___ D143 } Cro...

GEMOTO

Details: Joe's American Bar & Grill 985 Providence Highway (RT 1) Dedham, MA (781) 329-0800 Reservations are under the name "Timothy" . http://www.joesamerican.com *For any hams: 444.700 88.5 (-) MDC1200 is welcome I as well as others will be monitoring on the way there. RSVP in this t...

GEMOTO

I'm in and can assist in planning.

GEMOTO

Does not matter to me, anywhere inside 495 is ok for me.

474

GEMOTO

Metro Boston would be a great spot. Should be a good time.

GEMOTO

I have never seen an alternate housing color supplied by Motorola for the P1225. If you really want a different color that bad, you may consider painting the case with a plastic enamel as some have done on the board already. The hosuing of an XTS5000 was stripped, prepped and painted with a white en...

GEMOTO

I have seen iden base stations available on eBay in the past few months, usually in the $3,500 price range. I do know know the legal and technical aspects of putting them on the air though. I am guessing that they may be able to function without connectivity to a central controller, similar to the f...

GEMOTO

There were definately more than two manufactured. I was at APCO ovber the summer and they had at least 20 working prototyps at the booth for people to play with. They also has 7-8 of the mobiles. However, as resqguy911 says there are two different models offered in regards to display and keypad.

GEMOTO

Didnt see anything on there, you may want to call parts ID and see if they can get you a part number.

800 422 4210

GEMOTO

Hello. Does anyone know where I could get any parts for a Motorola ML900? I am looking for door that covers the Ethernet connection area. I looked on Ebay but no such luck on finding anything and my local radio shop couldn't help me. Any help would be nice-thanks. Try Motorola Online. I'll take a l...

GEMOTO

SUBJECT: Remote Speaker Microphones used with XTS1500/2500/5000, MT1500, PR1500 MTS2000, MT2000, HT/JT1000, MTX8000/9000 and MTX838 series units – Multiple issues as described in the symptoms area below. MODEL / SYSTEM AFFECTED: Microphone Kits: PMMN4051A, PMMN4038A, PMN4045A and NMN6193BSP03 Replac...

GEMOTO

Pin Function
1 1 Wire
2 PTT
3 Speaker
4 USB_D-/RXD
5 Ground
6 VBus
7 Mic Hi
8 GPIO_1/USB_D+/TXD
9 HUB/Key Fail
10 GPIO_0/PWR_On

GEMOTO

Is that an FSB/SRN etc? If you do you have it in complete for or the number of it? EDIT: Nevermind... I found it. BULLETIN MOTOROLA PRODUCT SERVICES LAND MOBILE PRODUCT SECTOR PSB # 767 1301 E. ALGONQUIN RD. APC # 424 SCHAUMBURG, IL. 60196 Date: MAY, 1996 (847) 576-0180 EXPIRES: 5/31/97 Subject: Dig...

GEMOTO

For the last couple months I have been noticing some audio issues or abnormalities on my system. I have a multi-site SmartZone 4.1 system. There are 2 simulcast zones with about 4-5 sub-sites each. Each simulcast zone is mixed-mode with 6 channels analog only and 6 channels mixed mode. There are AS...

GEMOTO

When you are adding a zone are adding one from the default or the current zone. There are two small boxes next to the - + X buttons that say something like DEF or CUR, if you have CUR selected it will copy from the previous zone. DEF will make a new zone from scratch, which will most likely only hav...

GEMOTO

Would anyone happen to know the part number for the KVL3000 cloning cable?

It has MX Speaker Mic Connectors on both ends.

Thanks,

GEMOTO

I got the one from Mouser

GEMOTO

Thanks, Al. I called Parts ID and the gentleman was very helpful. He confirmed that the SLN6435A has been discontinued. He pulled up an internal drwing and gave me the part numbers from it. Thre is no number for the housing or bannana jacks but he gave me the following: 2584903H01 - Raw Transformer ...

GEMOTO

Yup, 99.9% sure there is no module installed.

GEMOTO

The radio will display EMC 00.00 if there is no secure module installed in the radio, but the "Secure Hardware Equipped" box is checked in CPS. It will also display error code 09/10 upon power-up which means there is no Secure module installed but the box is checked in CPS. If it does not ...

GEMOTO

Would this product from Radio Shack be a suitable Replacement for connecting Spectra's etc. to grounded test equipment?

http://www.radioshack.com/product/index ... Id=2062214

The SLN6435 is NLA from Motorola.

GEMOTO

Thanks, Al. I reversed the cable and it's now working.

GEMOTO

Hello All, I am trying to read a CDM1250. I am using Professional Radio CPS R06.07.04. I am using an RLN4008E with a factory computer to RIB cable. I attempted to make a programming cable using an RJ-45 to DB25 adaptor. I followed the pinout on the Batlabs page DB25 Pin 1 --> RJ45 Pin 4 DB25 Pin 25 ...

GEMOTO

Link?

GEMOTO

I have not tried it in digital but in analog it will pass audio for 15-20 seconds at least. Th audio went over at least 2 zones of the SmartZone. If you program the wrong trunking type i.e Message instead of PTT-ID, it will key up but the audio will not go over any Zones but the one you are on, as t...

GEMOTO

I have noticed that even if I program in the incorrect connect tone I still am able to key up on a Talk group and it will go over multiple zones.

This is on a 4.1 SmartZone both ASTRO and analog, mostly ASTRO. 800.

GEMOTO

I think what he is trying to do is make the ASTRO talk group determine if the receiver will unmute or not. Basically using the ASTRO talk group as a form of coded squelch. Say he is on 855.2375 and wants to only hear talk group ID: 1234 on that particular frequency and no other voice traffic, regard...

GEMOTO

If the radio is flashed for ID Display it should work. Have you tried keying up the radio on the talkgroup then seeing if it displays ID's? Will it display MDC1200 ID's or conventional ASTRO ID's? I just looked at a codeplug from one of my XTL5000 radios on a Type II SmartNet and I remember that it ...

GEMOTO

On a Motorola radio you read the radio in with Tuner and click on the reference oscillator tab. It will list a frequency that is pre-programmed and is within the band split of the particular radio you have. You connect the radio's antenna port to the input of the Service monitor or Frequency counter...

GEMOTO

The NAC for a P25 system (3600) is set using the last 2 digits of the System ID anf the Connect Tone Number. The Connect Tone numbers are as follows: 0 = 105.9 1 = 76.6 2 = 83.7 3 = 90.0 4 = 97.3 5 = 116.1 6 = 128.6 7 = 138.5 For example a System ID of 1234 with a connect tone of 97.3 (4) would be N...

GEMOTO

The station also needs to have the extra memory chips on the main board that contain the IR firmware. They will say IntelliRepeater on them and give the rev such as 2.03, 4.1 etc. IIRC there are two standard memory chips and there would be two additional with the IR firmware. I dont have the manuals...

Search found 252 matches