Search found 59 matches

by N9NU
Fri Aug 19, 2022 2:48 pm
Forum: Software & Firmware Releases & Issues
Topic: USB Programming After Window 10 2004 Update
Replies: 2
Views: 7386

Re: USB Programming After Window 10 2004 Update

Make sure you have the following drivers installed....NOT anything else: OEM File Name: PL2303_Prolific_GPS_AllInOne_1013.exe - Ask if you need it. File Details when u right click & go to properties: 14.0.0.162 Prolific Driver Version: 3.8.40.0 Driver Dated: 9/16/21 9600, N, 8, 1, none - FIFO&qu...
by N9NU
Fri Aug 19, 2022 1:43 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: RE: Availability of HT-1250 parts
Replies: 1
Views: 1763

RE: Availability of HT-1250 parts

Does anyone have a source for these (besides moto themselves....resellers ok) Model: AAH25KDF9AA5AN Serial: 749TDL1543 OEM Firmware: R05.06.03 Current Firmware: R05.18.01 Needed: (2) 6088541M01 3VDC Li-Ion PRO/WARIS 1250 (2) HLN9820A Universal Dust Cover (2) Intrinsically Safe Orange neoprene case s...
by N9NU
Thu Aug 18, 2022 3:29 pm
Forum: Radio Programming
Topic: HT1250 AAH25KDF9AA5 & AAH25KDH9AA6 & code plug info
Replies: 1
Views: 1421

HT1250 AAH25KDF9AA5 & AAH25KDH9AA6 & code plug info

Hi I have two 1250 (136-174) radios and when I read the code-plug from the AAH25KDH9AA6 model it returns with the following. NOTE: I refer to it here as the '6' model versus my other '5' model; the AAH25KDF9AA5 AAH25KDH9AA6 - This HAS a full keypad and 128 channels - NOT 16! - I guess it was modifie...
by N9NU
Wed Feb 05, 2020 12:33 pm
Forum: Radio Programming
Topic: MOTOROLA XPR 2500 Mobile Radio UHF 403-470MHz - PASSWORD RESET?
Replies: 3
Views: 7113

MOTOROLA XPR 2500 Mobile Radio UHF 403-470MHz - PASSWORD RESET?

Hi I have a remarkable one time deal to buy 10 MOTOROLA XPR 2500 Mobile Radios for $200, however, I need to know how to reset each of them or re-flash them so it removes the password which was/is unknown to the seller. I know it can be done. Is it a matter of getting a hold of the same or > series f...
by N9NU
Wed Sep 06, 2017 7:15 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Modifying Low Band CDM1550 onto 10m 29 MHz
Replies: 9
Views: 5864

Re: Modifying Low Band CDM1550 onto 10m 29 MHz

Wait....the CHIRP programming app works with Motorola radios? I didn't see any of them listed.

I have a CDM 1550 (low band) and would love to mod it for 10M



Tim S Dickerson, CEM
ARS N9NU - EN51
Woodlake Landing - ICAO: IS65
by N9NU
Tue Sep 05, 2017 10:18 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: HT-1250 UHF 403-470 - Expanded RX
Replies: 0
Views: 3034

HT-1250 UHF 403-470 - Expanded RX

Hi guys Is there ANY way to program in via the CPS a frequency of 470.3875 & 473.3875 in a radio with a 403-470 split ? I know the old DOS method for other radios, however, I just need to receive this frequency if at all possible. I have access to all CPS versions & firmwares released Is the...
by N9NU
Sat May 30, 2015 3:24 pm
Forum: Radio Programming
Topic: HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues
Replies: 4
Views: 3265

Re: HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues

Hi Well thank you for the information. While it did not directly help, it indirectly did!! For some reason, I had installed the latest USB to COM drivers that were on the web site for the type of IC used on my motherboard for COMMS and that ended up being the problem. It could read/write via the War...
by N9NU
Sat May 30, 2015 9:19 am
Forum: Radio Programming
Topic: HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues
Replies: 4
Views: 3265

HT-1250 HK25KDF9AA5AN/Rib-less USB/CPS Issues

Hi I have a an HT-1250 with the following: [Info per the printout I received w/ the radio] Model: AAH25KDF9AA5AN Firmware: R05.18.01 Serial #: 749TDL1543 OEM Codeplug: 04.11 Latest Codeplug: 04.01 [Info I get when I read radio w/ Waris 3.xx.xx FW/CPG Update/Repair Program] Codeplug Part #: 51R07035A...
by N9NU
Sun May 24, 2015 3:15 pm
Forum: Radio Programming
Topic: HT-1250 CPS/Version/Programming Help
Replies: 1
Views: 2356

HT-1250 CPS/Version/Programming Help

Hi I just purchased a used Conventional HT-1250 128 Channel VHF with the following configuration: General Frequency: 136-174MHz Firmware: R05.18.01 (Appears to be the latest) Serial: 749TDL1543 Model: H25KDF9AA5[AN] - the AN at the end is present on the sticker inside the radio, however, not listed ...
by N9NU
Wed Apr 11, 2012 9:57 am
Forum: Radio Programming
Topic: Need info on M1225 RSS Versions.....probs with tx/rx
Replies: 5
Views: 2489

Need info on M1225 RSS Versions.....probs with tx/rx

Hi I have a Motorola M1225 which I listed for sale and before I send it off I would like to verify the radio can be read and written to. I have the following version: Motorola Radius 1225 Version 3.1 Release Build 2 DESCRIPTION: This software is Version 3.0 of the 1225 Series RSS. It supports the R1...
by N9NU
Sun Apr 01, 2012 12:36 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Converting HT-1250 limited keypad to full DTMF
Replies: 3
Views: 763

Re: Converting HT-1250 limited keypad to full DTMF

LOL! Thats funny....I will check that out when I get home from work....I actually have a full keypad front cover for a VHF model....

Tnx for the info guys....I thought it was pretty easy to do...

Tim
N9NU
by N9NU
Sun Apr 01, 2012 8:14 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Converting HT-1250 limited keypad to full DTMF
Replies: 3
Views: 763

Converting HT-1250 limited keypad to full DTMF

Hey

Is it possible to purchase the appropriate replacement parts so I can 'upgrade' my HT-1250 from a limited keypad to a full DTMF kaypad??

Tim
N9NU
by N9NU
Sat Aug 26, 2006 4:11 pm
Forum: Radio Programming
Topic: Programming Saber III questions
Replies: 7
Views: 1801

2K option

From the main RSS menu I hit F4 then F4 again to get to the options menu and I saw nothing in that list that mentioned anything about memory...2K or 8K even. I assume that F4 F4 is where you wanted me to look right? If thats the case, maybe I can just recoever it with the instructions you said and r...
by N9NU
Sat Aug 26, 2006 8:59 am
Forum: Radio Programming
Topic: Programming Saber III questions
Replies: 7
Views: 1801

Programming Saber III questions

I am having trouble writing a new codeplug I made for my Saber III. I read the codeplug ok and it has a CORE of 5D it says and comes up with a model number of H44SAK7139AN...which is fine, but I need a C model to enable scanning. Now I have never heard of a Saber III that does not scan. I saved the ...
by N9NU
Fri Jul 28, 2006 5:51 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Saber battery charging questions......
Replies: 1
Views: 485

Saber battery charging questions......

Can someone please tell me what the standard and rapid charger uses as far as voltage in concerned when charging Saber batteries. I received 3 brand new Ni-Cad's for free and don't have a charger yet. I have plenty of ways to temporarily charge them initially for 32 hours (slow charge), but I need t...
by N9NU
Sat Jun 05, 2004 7:24 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Got my New VHF 1250 but has Firmware 2.0.x - I have 6.04.00
Replies: 0
Views: 430

Got my New VHF 1250 but has Firmware 2.0.x - I have 6.04.00

I have CPS 6.04.00 in which i re-programmed it, but some of the features I cannot access....which i am sure is because it needs a firmware upgrade. This one has a 2.0.x version formware where as my UHF one has 5.x.x. I would like to enable to security code upon bootup among other things. I have a re...
by N9NU
Wed Apr 21, 2004 11:55 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Help :P Need Maxtrac "tuning data" information
Replies: 1
Views: 394

Help :P Need Maxtrac "tuning data" information

Can someone open a Maxtrac 300 (VHF) radio and give me the tuning numbers (data) printed on the synthesizer shield. It is asking for one 3 digit number and one 4 digit number. Mine have all the stickers taken off.


Tnx

Tim
by N9NU
Sat Apr 17, 2004 2:17 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Anyway to RX out of band with HT1250...need 470-475 using...
Replies: 1
Views: 404

Anyway to RX out of band with HT1250...need 470-475 using...

My software wont allow for the "shift+number" routine to bypass the freq limits. Is there another way you can do it with the CPS ?

This is a HT1250 403-470 MHz it shows.

Tim
N9NU
by N9NU
Thu Apr 15, 2004 1:35 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need EEPROM help on Maxtrac 300 and blanking 800mhz logic bd
Replies: 6
Views: 713

Rgr

Yeah i borrowed one from the University here. Will get it done tonite. Too busy working on my repeater.

Tim
N9NU
by N9NU
Wed Apr 14, 2004 12:28 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need EEPROM help on Maxtrac 300 and blanking 800mhz logic bd
Replies: 6
Views: 713

Hi

Ok that sounds great. What more information did you need about the board? or other info.

Tim
by N9NU
Tue Apr 13, 2004 4:46 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need EEPROM help on Maxtrac 300 and blanking 800mhz logic bd
Replies: 6
Views: 713

Need EEPROM help on Maxtrac 300 and blanking 800mhz logic bd

I got a logic board from a 2 channel 800MHz maxtrac a while back, and after blanking the board and "adding" a new logic board it only comes up with 2 channels. Now maybe this is right, but my old radio was 16 channels with the old eprom. Can this 2 channel chip ( HLN5569A v 5.34 from the 8...
by N9NU
Sun Apr 11, 2004 10:00 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: GTX mobile radio - powers on, then right back off
Replies: 9
Views: 1720

Found it

Found it. Nevermind. Thanks a bunch guys. This board has been great :)

Tim
N9NU
by N9NU
Sun Apr 11, 2004 9:52 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: GTX mobile radio - powers on, then right back off
Replies: 9
Views: 1720

woops

ok that didnt turn out right

From the back of the radio - antenna on the left, accy connector on the right


. . . . . . . .

. . . . . . . .
by N9NU
Sun Apr 11, 2004 9:51 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: GTX mobile radio - powers on, then right back off
Replies: 9
Views: 1720

Great

Ok great. I see the pinout. Now I just need to know which is pin 1 on the connector looking from the back of the radio

Pwr Accy Pin
. . . . . . . .
OO
. . . . . . . .
by N9NU
Sun Apr 11, 2004 9:13 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: GTX mobile radio - powers on, then right back off
Replies: 9
Views: 1720

More info

Here is the sellers description: Model # M11UGD6CB1AN 10 System 10 groups. There is no power cable, bracket, microphone or accessory connector with this unit. What you see is what you get. I have no way to test all the units’ functions. It does power up and steps thru the various systems and groups....
by N9NU
Sun Apr 11, 2004 9:03 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: GTX mobile radio - powers on, then right back off
Replies: 9
Views: 1720

GTX mobile radio - powers on, then right back off

I bought this on ebay for $25 bux or so. Its a GTX 800 MHz mobile radio. Its in great shape outside, but for some reason it shuts off 2 seconds after it powers on. All the lights and LCD images light up and then it goes dead. This happens everytime when I turn it on. Anyone have any ideas? Already h...
by N9NU
Fri Apr 09, 2004 2:19 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How do i remove the casing from a HT 1250
Replies: 2
Views: 476

DISREGARD

Disregard. You can delete this post ;) I figured out

Tim
by N9NU
Fri Apr 09, 2004 2:16 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How do i remove the casing from a HT 1250
Replies: 2
Views: 476

DISREGARD

Disregard. You can delete this post ;) I figured out

Tim
by N9NU
Fri Apr 09, 2004 2:06 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How do i remove the casing from a HT 1250
Replies: 2
Views: 476

How do i remove the casing from a HT 1250

I removed the top volume dial and channel selector knobs as well as the antenna and the black plastic top piece..the one with the channel numbers on it.

Do i need to pry the casing off by using a screwdriver at the bottom like the HT 1000 ??

I dont wanna break this one LOL

Tim
N9NU
by N9NU
Wed Apr 07, 2004 12:36 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Got a new 800 MHz logic board for my Maxtrac 300 BUT
Replies: 2
Views: 366

Got a new 800 MHz logic board for my Maxtrac 300 BUT

WHen I goto turn it on, i have no front display. Do i need to use the RSS and enter any info in the service section??


Tim
N9NU
by N9NU
Mon Apr 05, 2004 5:47 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: M1225 Prog.cable help whoa! and HT-1250
Replies: 3
Views: 672

Got it

Ok kewl guys

Got the M1225 all set now. I had wrong RSS loaded LOL!


Tim

Just need to get the HT-1250 problem figured out
by N9NU
Mon Apr 05, 2004 4:52 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Help PSE: Got this HT 1250 to read part way....BUT one error
Replies: 2
Views: 483

Help PSE: Got this HT 1250 to read part way....BUT one error

I need a codeplug for the HT 1250 UHF. It gets half way though loading the codeplug, it pops up with an error " Image has a block with absBlkID 39, but the layout does not have this block" and it just stops and quits.

Is that what I need? Or what

LOL
by N9NU
Mon Apr 05, 2004 12:10 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: M1225 Prog.cable help whoa! and HT-1250
Replies: 3
Views: 672

M1225 Prog.cable help whoa! and HT-1250

Ok, this looks like the cable that the maxrad uses so I tried it with the appropriate software ( the RSS i use to program all my radius and maxtracs). The M1225 is supposed to be the same, just plug the rj45 in and away I go. Well it isnt connecting. I get a COM error. Is there another thing I need ...
by N9NU
Mon Mar 22, 2004 9:03 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Maxtrac 300 Schematic needed - will buy
Replies: 2
Views: 685

Maxtrac 300 Schematic needed - will buy

I need a schematic for a Maxtrac 300 Model D33MJA7JA5_K. If I have to buy one, I will. I didnt know if anyone here had one posted. I need to troubleshoot my "no receivce" audio" problem. I already have access to the radio lab at the university :)


Tim
N9NU
by N9NU
Thu Mar 18, 2004 7:52 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: I have no RX audo now with my Maxtrac 300. Tx audio OK
Replies: 6
Views: 794

Ok Tnx guys

ok Tnx guys. I will take it up to the EE building at NIU labs where I can work on it tomorrow.


Tim
N9NU
by N9NU
Wed Mar 17, 2004 6:16 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: I have no RX audo now with my Maxtrac 300. Tx audio OK
Replies: 6
Views: 794

I have no RX audo now with my Maxtrac 300. Tx audio OK

I got the parts to fix my audio output problem and and noticed I have no receive audio. I did all the usual checks....I tried both with the internal speaker and with the external like i usually have it. Is there a few transistors or orther components I can diagnose for problems. All I have at the mo...
by N9NU
Fri Mar 12, 2004 7:32 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Got my P1225 partly programmed. I also need the ham bands
Replies: 1
Views: 505

Nevermind

Nevermind. I read over the wonderful info on the site here and found out what i had to do.....
by N9NU
Fri Mar 12, 2004 7:14 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Got my P1225 partly programmed. I also need the ham bands
Replies: 1
Views: 505

Got my P1225 partly programmed. I also need the ham bands

I also need it to be able to go down to 440MHz. Is this possible. Its a Radius P1225 model P94ZRD90C2AA

Do i need to edit via hex editor or something?


WinRSS 3.1 says freq to low when i try to enter it

Using Win 3.1 on old lappy


Tim
N9NU
by N9NU
Thu Mar 11, 2004 2:32 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need P1225 cable/programming help
Replies: 3
Views: 575

Comm settings

Might there be special COMM settings I need to setup

Right now it is 1200 N 8 1 FIFO disabled


Tim
by N9NU
Thu Mar 11, 2004 2:17 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need P1225 cable/programming help
Replies: 3
Views: 575

Need P1225 cable/programming help

I understand by looking at the diagram from this page http://www.batlabs.com/p1225cab.html that only X2 (ground) and X3 (data Input) are used and the RIB side of the cable is just the 4 to 11 jumper and pin 1 as ground (to X2) and pin 15 is data to (X3). Is this correct and are these the only two co...
by N9NU
Sat Feb 28, 2004 2:48 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How long do i charge the 4000mAh NiMH 7.5v batt using std
Replies: 16
Views: 1396

Ok where on ebay - i searched

Ok i searched on Ebay for Motorlola rapid chargers, rapid chargers, etc. and came up with nothing. Please give me a link so I can go by.

Tim
by N9NU
Fri Feb 27, 2004 1:39 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How long do i charge the 4000mAh NiMH 7.5v batt using std
Replies: 16
Views: 1396

Just got off phone with tech sppt at batteryzone

According to their tech dept, 16 hours will charge with a regular (non rapid) charger


Tim
N9NU
by N9NU
Fri Feb 27, 2004 1:34 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Can I prog.my HT-1000 to hear MDC when i key up..on my end
Replies: 2
Views: 469

Can I prog.my HT-1000 to hear MDC when i key up..on my end

I was wondering if there is a software selection that would enable me to hear my own MDC-1200 signal locally thru my speak/mic when I key up. Obviously the other end hears it, but I would like to hear it so I know when to key up...and yes i know i can just wait the few hundred milliseconds to tx... ...
by N9NU
Fri Feb 27, 2004 12:55 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How long do i charge the 4000mAh NiMH 7.5v batt using std
Replies: 16
Views: 1396

Its there. here is the info.

NiMh Extended Run Replacement Battery
Super High Capacity, NiMh
7.5 Volts 4000mAh
BatteryZone Part: BZ7144XX
BZ Price: $68.00
http://www.batteryzone.com
by N9NU
Thu Feb 26, 2004 4:50 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How long do i charge the 4000mAh NiMH 7.5v batt using std
Replies: 16
Views: 1396

Yup

Yeah...just came today and plopped it in the charger. Overnite sounds right,but I will email them and get the official word. Now i just need to find a DTMF front/cover and I am all set :)


Tnx for the source.


Tim
N9NU
n9nu@n9nu.net
http://www.n9nu.net
by N9NU
Thu Feb 26, 2004 4:27 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: How long do i charge the 4000mAh NiMH 7.5v batt using std
Replies: 16
Views: 1396

How long do i charge the 4000mAh NiMH 7.5v batt using std

How long do i charge the 4000mAh NiMH 7.5v batt using standard charger for the HT-1000. So far its being going for abt 8 hours. I got it at 10am and it was stone dead of course so put it in the charger. This isnt a rapid or conditoner charger.


Tim
N9NU
by N9NU
Tue Feb 24, 2004 6:28 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Need info on Maxtac 300 and HT-1000 B version 16 channel
Replies: 0
Views: 266

Need info on Maxtac 300 and HT-1000 B version 16 channel

I am wondering if it is possible to add MDC to the Maxtrac 300 32 channel VHF radio I have and also wondering if its possible to expand the channel capacity of my HT-1000 from 16 to 32 ???


Tim
N9NU
by N9NU
Sun Feb 22, 2004 12:13 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Help Just got a a Moto RLN4008B RIB - Need some more info
Replies: 4
Views: 605

IT WORKS!

GOt it.....tnx a million for everyones advice.


Now to purchase some accesories


Tim
ARS N9NU

De Kalb County OEM Comm
by N9NU
Sun Feb 22, 2004 11:18 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Help Just got a a Moto RLN4008B RIB - Need some more info
Replies: 4
Views: 605

More info for ya

Ok...he just gave me the RIB box and the cable that goes to the PC. I have a 25 pin serial connector laying around from my older clone rib box that works with my Maxtrac. I just took that apart and verified that pins 4 and 11 are jumpered for the bias and pins 1, 6 and 15 all have leads off of them ...

Go to advanced search