Batboard

RTFireguy

Contact Esscomm on here, he might be able to help.

RTFireguy

RVN4182V

RTFireguy

Cost isn't that big of a deal, i mean it is but not as much as having the FPP.

RTFireguy

So I want to add a few options onto my XTS2500 Rev "B" 8 Meg. Radio has all Tags. It currently has Q806 ASTRO Digital Operation Q52 Federal Government FPP H35 Conventional Systems Operation Q53 FCC FPP And Radio Cloning Q667 ADP Encryption Software DSP Based Only And I want to Add H14 Enha...

RTFireguy

So how can the average joe order a XTS2500 from /\/\ ? More so for the 8 meg board. or is it possible to swap the board out or have it swapped out? Mainly due to the fact that if i can't get R10 into the radio, I really don't want to be stuck with 240 mandatory personalities. and only 16 chans each ...

RTFireguy

Latest Host is R09.00.05 Latest DSP is R09.00.02 Host R10.00.00/DSP R10.00.00 is either just released or going to be released shortly. It's been delayed???? With Q52, /\/\ot will probably give ya sh1t about the Flash. If you have Q52 & Q53, then you'll be given less crap from the big /\/\. Good...

RTFireguy

Bruce1807 wrote:also depends on wether or not you have an 8 meg or a 4 meg board

When read in CPS it states 8 meg. but on service mode it only shows 4 meg,
So I'm thinking the uplift will allow the 8 meg

RTFireguy

Ok, I just bought an XTS2500 UHF R2 Model III. My question is what is the new Firmware release and how would I go about having the radio flashed? Is it something i can do myself, or does a it have to go to /\/\? Also since this radio has FPP, would i get flack from /\/\ ? Thanks in advance guys.

RTFireguy

tvsjr wrote:
Nexrad16 wrote:Can I push a XTS4000 cp into a XTS5000 and get the vibra alert?
Shoving a codeplug into the radio doesn't make a vibrator motor magically appear inside the case...

If that was the case my wifes AS3 would be with her 24-7 :-0

RTFireguy

Probably not for a while - it's not widely used except for the coasts it seems. I've had a chance to play with a few of the VHF Units - they're actually built better than a NexTel IMO, and the range is OK. Now, it's basicly an XTS5K but in a covert case? Any one know a cost for the VHF and the opti...

RTFireguy

Awesome, So when will they have a UHF high band out? hehe

RTFireguy

My main question is,

What doe s xts4000 look like?

RTFireguy

what did you do with the MW800?

I have a 03 Dakota R/T that i want to outfit you give me great ideas

RTFireguy

The Saber SI was current when the first Astro radios came out. The only thing common was the case. It was a "hold over" radio until the 800 Astro Saber was in production, similar how that Astro Spectra Plus was a hold over until the XTL5000's were released. Programs with its own RSS. I th...

RTFireguy

Ok since some of you are still stuck on the "Buy a scanner" kick. I can go on and on about how a radio is better on RX then a scanner BLAH BLAH but I won't so get over it. I have what I have, and that's not going to change because a few people on a message board told me to. Now on to the w...

RTFireguy

escomm wrote:oh so someone else can spend their time building it

haha

hahahaha

I figured someone might have done it already. geeez

RTFireguy

xmo wrote:MR. PIPERTECH said that wold never happen.

heh, I don't mean a codeplug out of the radio just something close to it along the lines of an already set up chann line up with freqs. I'd rather not spend 1-2 hrs putting everything in and changing all the NAC settings

RTFireguy

Anyone have an updated LAPD codeplug. to match what they are running now?

RTFireguy

Any more info on this system? is it avail to the public?

RTFireguy

it's enabled. I can set my soft id but it won't xmit it

RTFireguy

I currently have an XTS3k 450-520. R05.52.08 DSP 06.06.12 599108-1F4600-0 The question I'm haing trouble with is, Does the XTS decode Soft ID's? and if so how can i get it to set up. Currently I can see the Digital ID (Radio Number) of the other Radio but it doesn't show the Soft ID nor does it tran...

RTFireguy

Its funny. Someone posts about this guys business and when he signs up here to talk about it and give some more info and help he gets some jerk up his rear.

54Ward, Glad to see a company taking the time to help inform those of us out here.

RTFireguy

alright i'll even take a whore flash. Anything at this point.

RTFireguy

Nobody!!!?

RTFireguy

I am in need of an s-record for an xts3000 model III 450-512. It needs to have a loaded flash. I would prefer the none-nick modat flash but the nick one would be fine.

Thanks in advance!

RTFireguy

Very nice. Clean and simple.

RTFireguy

Dibs when you get one in with the new flash.

RTFireguy

How much would a flashcode upgrade to go from 100001-000000-7 Q806/G806 IMBE / APCO-25 Digital Operation H35/G48 Conventional Operation To 548008-0C0000-7 Q806/G806 IMBE / APCO-25 Digital Operation H14/G114 Digital ID Display H868/W969 Multikey Operation H46 One-Touch Operation H38/G51 Smartzone Ope...

RTFireguy

Is all that's needed just swaping out the RF board? Also what does it cost for a flash upgrade? anyinfo would be great.

RTFireguy

Damn.

RTFireguy

Basicly I want to turn a Non Digital AS3 that i bought into digital.

How hard is it and also what is needed?

Thanks all.

RTFireguy

You can also mount them to your front quarter panels.

Right above the Wheels at a kick out so it'll give you more intersection warning.

Also you could mount them verticaly in front of the tires, on the fenders

RTFireguy

now would these be right angle?

RTFireguy

I could careless about a walk-me-thru, all i asked is if someone has done it, and what is needed. I didn't want a jerk off remark, "OH we already talked about this" give me a break. "What is needed"......hmmm, sure sounds like a walk me thru...it is called...research...no answer...

RTFireguy

That didn't help me out at all. Good job. :o something must be in the water lately.. wow i mean honestly what did you expect? that thread pointed out that they were simply SMT LEDs and whatnot. were you pissed that they didnt have a handhold walk-me-thru it version? I could careless about a walk-me...

RTFireguy

My, aren't we an ass? As far as I know, it's never been done. We've established that small SMT-type LEDs (qty. 2) are used. So do a little digging, order the parts, and try it... how do you think the rest of us have come up with lots of our Moto knowledge over the years? Besides, when you get done,...

RTFireguy

Dale Earnhardt wrote:Here you go

http://batboard.batlabs.com/viewtopic.p ... ht=display

We talked about it before.

Wow, Thank you oh so much.

That didn't help me out at all. Good job.

RTFireguy

So i've been curious as to if it's posible to change the backlighting color on the display.

It's green and that's cool, but i was wondering if i could change it to say a blue color.

Also what's involved in this and what would be needed.

Any help and input would be great thanks

RTFireguy

Would this belt clip work with AS3's?

Motorola saber belt clip p/n NTN4741B

RTFireguy

How would I go about getting the flashcode for a Motorola Saber SI 800MHZ?

I don't have any software or anything to hook it up to. Is there a way to read the radio without that?

any info would be great thanks.

Jeff.

Search found 40 matches

Re: Looking for 512k firmware upgrades

Re: Latest XTS 3000 CPS

Re: Flash Upgrade Question and cost?

Flash Upgrade Question and cost?

Re: XTS2500 Firmware Upgrade Question

Re: XTS2500 Firmware Upgrade Question

Re: XTS2500 Firmware Upgrade Question

XTS2500 Firmware Upgrade Question

Re: UHF XTS4000's now available

Re: UHF XTS4000's now available

Re: UHF XTS4000's now available

Re: UHF XTS4000's now available

LAPD Codeplug?

XTS3000 Soft ID display question

XTS3k S-rec needed! 450-512

XTS3000 UHF Flashcode upgrade ?

AS2 800mhz to UHF T band?

Flashing a Non-Digital AS3 UHF to a Digital AS3 UHF?

Question about the AS3

OT: Question about belt clips

Motorola Saber SI Flashcode Question?