Batboard

DFD565

looking to do this in a non trunked operation(8-tac) . to allow for mutual aid interopability. we border counties with LB and VHF.. makes working with the agencies difficult with us on 800. could be useful in trunked if there was a way know they had connected.. was that pinout for the cdm or xtl? Th...

DFD565

@gmail.com

DFD565

Did you ever figure this out.. I'm looking to do the same type of operation.

Thanks

DFD565

what i'm looking for is to use a minitor II as the input to a maxtrac UHF one way repeat from 46Mhz(MinII) to 465Mhz(Maxtrac).. i know this can be done with two maxtrac's ...just don't have a lowband maxtrac....this would be for paging.....we use different freq's for comunications to and from dispat...

DFD565

I should clarify what i'm really trying to do is rebroadcast from low band to UHF not xband repeat. I dont know if a VOX type interface would work of if it is available.

DFD565

What I'm Looking to do is use a minitor II on low band as a reciever and a maxtrac or spectra as UHF transmitter(all products currently owned). The purpose for this is our county paging system is dying a slow death, (coming soon) is a new uhf paging system(so we have been told for many years). We ha...

DFD565

16 i believe

DFD565

I have a Model# AAM25SHF9DP5AN CodePlug ....don't know if that would help.....only off by one but that one could be the killer anyboby know if these are compatable....

DFD565

That be the truth .......but moto will upgrade a 5an to 6an fairly cheap ....cost me 115.00 done deal.....

DFD565

just sent my 5an to moto for upgrade cost 115.00 and now i have a 6an UHF 1550ls+ with 160 channels.....took 4 days....

DFD565

do you still have the dp5an code plug????i could use one.....have real problems with making this unit conventional only with codeplug from /\/\....

DFD565

waiting on upgrade estimate from /\/\ on one now ,,,....but i've seen it between 100.00 and 250.00 depends on the level of radio being upgraded...

DFD565

CDM1550LS+ will not do more than 16 conventional if it has a model number ending in "5AN" unless it has been modified.../\/\ will do this for a fee but it then becomes a "6AN" /\/\ will change model number if it is updated by them....at least thats what i'm going through with the...

DFD565

i have a cdm 1550ls+ but having problems using just conventional.....what am i missing....all i want is conventional no ltr ....new to cps...familiar with rss......it seems to allow me 18 conventional channels available...this also seems strange.....unit comes up with "searching" i deleted...

DFD565

just to add another element here i was about to ask this same ? about Spactras can they decode two tone like minitor's

DFD565

i should mention i'm looking at a connector faceplate and 6432B mount ,,,would this work and what cable would i need for this to work.

DFD565

I have a Spectra Model# DA5KM+068W -- ID NUMBER# D44KMA7JA5BK i want to remote mount this radio ...what will i need to do this..

DFD565

I had thought about programming different modes that mirror each other one high one low......just a pain not to mention a waste of space......thanks for the info.....just don't always want 100 watts out.....

DFD565

if i have a T84FWA7HA5AK trunk mount 100 watt UHF Spectra with A5 head is there a way to make power selection from radio during field operation...don't always want 100 watt....would like to set at 50 change to 100 if needed....but by making it a button selection..

DFD565

yeah strange that they would do this..... i have two 2000's one silverado one Burb. both are same ....neighbor has '00 silverado stripped down version has different wiring...strange. checked last night, our ambulance has '00 suburban "Fly Car" that has different wiring to high beams than m...

DFD565

yeah trying to find a low power as we speak.....to test this...will check ribbon cable....still cant locate a 486 door stop.

DFD565

i've looked back at my notes here from planning this what it looks like is happening with this installation is of the Two high beam leads the positive is coming into the flasher and is passed through flasher, the light bulb itself is powered by the flasher. so in theory when the high beams are on th...

DFD565

i'm in the middle of building a plug in harness for this flasher to put in my 'Burb..so i dont have to cut factory wires just plug it in....the instructions don't show that both are switched(link below to instructions and rough schematic for light system) ...do you have a schematic of the headlight ...

DFD565 · i'm using the RSS ver of 6.00.05 03-JUN-93

i'm using the RSS ver of 6.00.05 03-JUN-93

DFD565

/\/\ should have done a better job at this....this is worse than the 2000 date thing we went through 4-5 years ago....

DFD565

how much power will i need for keying this unit up....will 12 amp PS have enough juice...i believe its a 50 watt radio..

DFD565

dash mount D44KMA7JA5BK, voltage at 13.7 in both places radio is new to me i'm trying to read codeplug ...it does power up and show display beeps through modes....didn't want to TX with it till i knew where it was TX'ing from all apperances it is a working unit...Thanks

DFD565

more of the same.......however i noticed that the error with new cable is different than first one i dont get a protocol error with every thing on like it should be....what i get with new is "Serial Bus Failure: Busy Line Locked" i was getting "Serial Bus Failure: Protocol Error"

DFD565

okay here we go built new cable ....same result.....voltage is at 13.71 says meter ....not sure where to go from here....the laptop i have is 486/66 .....i've also tried a pentium 166 ......same result........i dont have a old 486 desktop...still not sure where to go from here.....hard to believe 3 ...

DFD565

moved to old laptop that was used for this purpose for years past that lost display and i get the same result.... however the ht1000 and mt1000 are working on this unit also.....i'm headed for new connectors and making a new cable...

DFD565

would you say that the fs0005 is the correct flasher for a 2000 suburban

DFD565

It must be hard to deal with know it all newbie's (that being me) . i'm back to looking for a 486 to run this s##t on........not the best design in interface. bums me out that this works for some but not all .....i've done 16 ht1000's and 12 mt1000's over the last 2 months with this setup with no pr...

DFD565

but this setupo works for my ht1000 and mt1000 programming. P.S. this is the first time at a spectra and first time with this ver of rss

DFD565

would you think the pc would make a difference....it presents different issue if the RIB is powered off or the radio is off, it seems as though it can tell that much...

DFD565

I'm using a P4 2.4 booting to dos 622 from floppy then using flashdrive as HD with mrss on it, works with my ht1000 , mt1000's only difference is cable from rib to radio, radio, and rss ver. homemade cable looks ok but had to add pins to existing acc. plug . i think i'll go get new connectors and bu...

DFD565

factory RIB, homemade cable from RIB to Spectra

DFD565

while checking the comm test i get a Serial Bus Failure protocol error in the RSS if i power off the
RIB i get power Failure if i power off the radio i get Busy Line Locked. any help her would be appreciated

DFD565

Galls has a flasher that will do what you need get the FS0004.

DFD565

Thanks...been looking all over for this info hate to waste space here with simple ? but hard to find simple knowledge sometimes

DFD565

Maybe I should clarify are Most Spectra's 128 channel.

DFD565

does anyone know if a spectra is anytinhg other than 128 channels???

Search found 41 matches

Re: Linking CDM1250 to XTL2500? (simplex to trunked)

Re: Linking CDM1250 to XTL2500? (simplex to trunked)

Re: Linking CDM1250 to XTL2500? (simplex to trunked)

Minitor II to Maxtrac or spectra repeater.

that be the truth man.......

CDM1550ls+ CPS issues..????

Spectra Remote Mount

Spectra Power Selectable ?

spectra programming issue

Thanks.....

? better asked...

Spectra options...How many channels standard