Batboard

clavo

Yep. Sent to my bedroom without desert.

Another member of the exclusive batboard 'no fly' club.

What WILL I do.

-c

clavo

Yadda Yadda Yadda. So did Pat Harrington give you and Alexis the key to his place yet?

For what it's worth.... You will have just as much success keeping me off this board as you did r0f. And we all know how that story played out *laugh*

clavo

How about some commentary from someone who doesn't consort with the loosing team. Stay-con?

-c

clavo

Let me know if you end up taking the cf-27 apart. I'd be interested in what that optional CDPD wireless modem connected to. I'd guess mini-pci or maybe pcmcia? That would be great if you could just stick in a mini-pci wifi card.

-c

clavo

Does that mean if I tear this thing open there is a 3rd PCMCIA slot that I can put the orinoco gold card that is currently sticking out the side into? This would be great as this card sticking out the side is the only weak point at the moment.

-c

clavo

Thank You!! I knew i remembered something about being able to change the on/off codes. Problem solved!

-c

clavo

Ya. I thought about that..... but the software doesn't allow for that. So i'm stuck.

-c

clavo

I'm in a pinch and dont have a copy of my I50R manual here. Normally you press * to open the patch and # to close. This isn't compatable with a VOIP system i'm using because it also uses the same * and # to begin and end dialing. I can't remember if there was any way to change the length of time req...

clavo

Share the wealth!

-c

clavo

If one of the mods says it's OK i'll offer the file up for download off my site. I don't know how/if the RSS rule applies because moto gave this away for free anyways.

Mod(s)?

-c

clavo

If you find it. Can you post the file name? I know I have it on my drive somewhere but without a name to search for i'd never find it.

-c

clavo

Thanks. Two people have told me the RSS is no longer available. Is this true?

What kinds of options are able to be tweaked with the RSS? Is the program cable same as spectra low power, or is it custom?

-c

clavo

Thanks!

clavo

Someone told me once there was a APCO25 ham repeater in the Portland area. Anyone know if this is true? If so, what are the freqs.

-c

clavo

I have searched the other portable repeater threads and not found what I need. I finally received my spectra portable repeater, but didn't receive the service manual with it as expected. I need to know some general information on programming this system. Is there a part # for the RSS that programs t...

clavo

If anyone has one of these, or a service manual for one, please PM me. Thanks!

-c

clavo

I called Multiplier. They claim they dont sell any LiON rechargeable batteries for the Saber. So does that mean that OEM is the only one?

-c

clavo

Who sells these besides Moto and Multiplier?

Anyone have any recent dealings with another company and like/dislike their battery? How much did it set you back?

-c

clavo

I took it apart and from what I can tell it does use IR for something. There are 2 IR LED's on the face of the watch that are directly under a tiny grid of holes on the face. Seeing as how the watch doesn't have any advertised IR features I figure it has to be for programming.

-l

clavo

If I were one of you, I'd go the step further and get the transcripts from nick's court case. It would give you perspective. For him to 'get off' the way he did, he must have had a good argument. Don't you all want to see that argument?

-c

clavo

Cow,

Would you mind if I compiled all your batboard posts into a coffee table book? Hard cover, nicely bound. Pure entertainment value.

-c

clavo

Then how would you piss on the letter? Or burn it over a few beers with friends? Or use it as toilet paper? Or get the information off of it to order the pre-paid box they offer, just to send it back filled with cement with a MT500 inside? Or buy one of those nifty Airsoft saber knock off BB contain...

clavo

So, not being able to know who has the legal flashcodes.... All you need to do is to figure out how many flash codes Nick paid for and then work out a system of rotating use. Monday, one of you gets to use their radio.... Tuesday someone else.... Maybe break it down into half days if there aren't no...

clavo

I don't want this good thread to get off topic, so i'll settle for a tie :) Even though I'm pretty sure my case post-dates yours, and the DMCA would most likely be twisted to apply here ;) -c Clavo, I'll see your article and raise you one. My previous statement said nothing of DMCA. Friday, April 16...

clavo

Sorry, I can't help myself: Monday 7th February 2005 Lexmark loses legal battle over cartridge refills Declan McCullagh CNET News.com October 27, 2004, 11:10 GMT Talkback Tell us your opinion A US-based manufacturer has had a preliminary injunction brought by the US printer company overturned, after...

clavo

Yes, I believe I have the correct module in hand. I'm just curious what actual chip performs the encoding/decoding of DES. -c My two bits worth: The DES Hibred has pins on the side, and plugs in. There are several formats available.(DES, DVP, DES-XL etc) I do not know which formats this radio suppor...

clavo

On a MX300 DES board there are two gold ICs. One is 40 pin the other 24 pin. Which one is the DES encoder and what is the other one?

-c

clavo

Now I just need to find out what kind of prom burner it works with

-c

GlennD wrote:The software I gave you will generate the programming info. This is the older radio and either version of the software will work.

clavo

http://www.hybrid.net/peter/DSCN3247.JPG was the best picture of the duplexor that I could get without taking it apart more. It puts out 2W, 10W, and 20W depending on external power, internal batt. I bought it brand new / old stock. I got a great deal. It's well built and the only issue right now fo...

clavo

I took some pictures of the inside of this thing.

Warning, they are hi-res.

http://www.hybrid.net/peter/

-c

clavo

Thank You! Thank You!

-c

GlennD wrote:I have the software. As I recall it will give the hex codes so you could use a generic programmer. It was emailed to me years ago by Telemobile. I do not think there is any restrictions, so I guess i could email it to anyone that needs it. PM your email address.

clavo

Yes sir. We should talk :) PM me. Wouldn't be in a silver case and based on the telemobile full duplex mobile radio would it? I'm tyring to find out how to reprogram a LEA suitcase repeater based on the telemobile unit. Not having much luck. They look like older OTP proms from national semiconductor...

clavo

http://www.telemobile.com

I'll upload some pictures of it in a few days. It's a damn cool suitcase repeater.

-c

clavo

I know it's not moto, but i'm looking for info / programming info on Telemobile repeaters. I hear it's an EEPROM. I can use the help! Thanks!

-c

clavo

Anyone own one of these? I never hear about them or see any for sale. Someone care to share comments on it? Thanks!

-c

clavo

Oh, I see what you are saying. So because Astro Sabers have been discontinued they are fair game. -c For our purposes, IP is defined as "The level of knowledge and modification, WITHOUT getting yourself in trouble." A spectra moflag thread? Old, discontinued product. I'm sure they aren't t...

clavo

Why no comment on using Wiki? It's couldn't be a better solution for us. Admins and Mods don't have to do any moving and WE can share information as we see fit. I offer a solution to the disconnection of the forums from the 'model specific' info archives, as well as a way for us to share information...

clavo

Well said. The model specific area of batlabs.com never gets updated. There is tons of great informaion in hundreds and hundreds of threads, yet none of it makes it over to the 'other side' of this web site. Take the r0f newbie astro sticky for example. How long has it sat as a sticky when it belong...

clavo

Go search yourself. Who knows what of them are left. Most of his insulting posts have been moderated or deleted for obvious reasons.

-c

The Pager Geek wrote:Examples?

clavo

As well as the biggest outspoken homophobic racist on the board.

-c

batdude wrote:i would not go there rusty.

let's just say it was an "administrative conflict" between alex and shaun.

and tim is correct, he was by far the biggest contributor to the astro forum.

d

clavo

I thought all Advisor Golds were synthesized.

-c

clavo

Thanks for all the replies! I guess i'll just buy the other kit. Seems every time I open the Visar something else doesn't work. What crappy radios.

-c

clavo

I know there are differences in the versions of case for A through D models of Visar. I'm trying to get what appears to be an earlier model DTMF refurb case to fit on a D series Visar.

Any tips on how to make this fit properly besides just buying a new D model case?

-c

clavo

If it's toolproofed how can I read and write to the radio with no problems? My understanding was if toolproofed that you couldn't manipulate the codeplug with regular RSS. I can do that no problem.

-c

central150 wrote:01/93 is a Toolproofed radio.. Someone used LAB on it... LAB + MTS = DOORSTOP

-Tony

clavo

Read radio. It's a VHF control board in a UHF radio. Go figure.

I assume thats what the error code is.

I guess i'll be needing to trade boards

-c

clavo

Anyone help me out with the error code?

The display is missing characters. The best I can make out is:

FAIL 01/?3

The ? looks like it could be a 8 or 9.

If the controller is VHF radio is UHF can this simply mean a mismatch and not toolproofed?

-c

clavo

Thanks Monty for all your help over the years. You will be missed.

-c

clavo

I cant tell from your pictures... is your lion battery the same size as the short moto battery (NTN 4592C) ?

-c

clavo

I picked up a mystery MTS2000 control board for $2. To get the flash and specifics id have to install this in my mts2000 and read the radio....however i'm curious if anyone can tell me the band by the model number on the module?

01/09 NTN7620D

Thanks!

-c

clavo

I picked up a UHF 403-470 visar. The case looks like a regular visar case that I've seen in the past but it says "Visar PLUS" instead of just "Visar".

Is this just a privacy plus visar plastic front that was placed on a UHF400 model or does this thing do something special?

-c

Search found 227 matches