OK...Well thank you everybody for responding....

I am going to try making a code plug new and programming it as stated...I will report back as what the results are...

Thank you...Phil

SABER lll With Trashed Code Plug Needs...Blanked And Reset-HELP I have a regular Saber lll that needs to be Blanked and Reset like the factory does... It has a 8k prom and thinks it has a 2k and has a corrupted checksum errors...its real bad. Can anyone help me... Is anyone a Saber Guru out there......

Thanks Randy... I'll check it out...Phil

MTR2000 Bad UHF 100W PA-4ea-M33P68 Transistors-Sub or Source I have a MTR2000 uhf 100 Watt 403-470 MHz Base/Repeater... it only puts out 25 Watts Max... the PA is Bad... The isolator is good...can the transistors in the final(4ea) be found or is there a substitute... Any help would be welcomed...doe...

Thank you Bob...

I'll Look in that direction and report back...but like I said it will be several weeks...

Phil

Bob… Thanks for the quick reply... I can't remember if there was error codes or not but I do remember it showing that there was a open squelch and carrier present when there was none...on the real time diagnostics screen and the squelch soft pots in service would not adjust at all.. and just flashed...

I have a CXB main board that has a problem caused by a loose wire scraping across the board. The board locks into transmit and does some other odd things... Can anyone take on the job... I really messed up on this one. I was hooking up a controller and everything was working perfect until the mishap...

I think it may be eaiser to install a cxb board...Phil

I don't have any information except second hand about a MSF5000 field modification to make a CLB PROM type station into a computer programmable radio.. Possibly using a R1225 board or similar...have you ever heard of such a thing...Phil

Programmable UHF MSF5000 "CLB"- Mod-Using a UHF-R1225 Radio?

Has anyone ever heard of this Mod...I would like any information on it if possible...

It sure would make the CLB Msf5000's more desirable to use and change parameters...

Please email me...

Phil...

Is there a MFS5000 or is it a Mis-print ?

It's on ebay and it'c cheap?

It looks like a MSF5000 was this a special series???

<EDITED, JAYMZ. Auction included software>

2 BACK-UP PRIBOI-1UM SPACE RADIO TRANSMITTERS

There on ebay:

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 40129&rd=1

MSF5000 VHF CXB It's Working Now...Thanks To All The station has a bad MARTI TTRC Kernal Board... it hooks to the TTRC control board when the MARTI interconnect is used...as soon as I pulled it out and jumpered the board fo normal use everything went normal...Thanks again...Phil PS... I created a ne...

Thank you Bob for the very nice reply... I will work on it today... I will go through the generation of a new code plug...just a note... The VCO's DO NOT have any tuning adjustments...have you seen this before...is this common in the VHF stations or is it because its a newer version?? Again thank yo...

I can read and program it OK

Well it came from a government auction...I thing it had FBI or Secret Service VHF Freq's in it ... I has a MARTI and the line PTT light is allways on...

Thank you I'll start there...Phil

I RECENTLY PURCHASED A MSF5000 VHF CXB STATION AND WHEN TURNED ON IT JUST KEEPS RESETING... THE VCO'S BOTH TX & RX DO LOCK UP THEN IN 15 SECONDS THE RECEIVE VCO LIGHT GOES OUT AND THEN CONTROLLER RESETS... A ERROR D85 SHOWS UP ON THE READOUT... CAN ANYONE GUIDE ME A LITTLE ON WHERE OR WHAT TO DO...

I bought a MSF5000 UHF "CXB" Repeater that was missing the Controller board... I bought a "CXB" board from a fellow Batlab'er and I appreciate his help, but it just reads 888888 upon power-up. when I try to read the station it say's the station is not responding...I have studied ...

MSF5000 "Yellow" Duplexer Cable

Thanks for the info....still need one...

Phil

Need: MSF5000 Duplexer Cable - For Reverse Split - Hi Out/Low In

I am putting the repeater on 449.725 Tx Output and 444.725 Receive Input.

A reverse duplex cable that connects the tx, rx and antenna port is needed.

Does anyone have just one they can sell me ???

Thank you...

Phil
phil@2hi.com

I LOOKED CLOSER AND THE MODEL LOOKS LIKE CDM1550LS RADIOS

NEWS FLASH: 240 MOTOROLA CDM1550'S STOLEN - LAS VEGAS SCHOOL DISTRICT... I JUST SAW THE NIGHTLY NEWS AND THEY JUST HAD A NEWS STORY THAT THE LAS VEGAS SCHOOL DISTRICT HAD 240 NEWER TYPE BUS RADIOS STOLEN... I PLAYED THE "TIVO" BACK SLOWLY AND IT LOOKS LIKE THEY WERE MOTOROLA CDM1550'S IN T...

Doug... Please Let Me Know Any Info You Get Such as PTT and COS switiching... I am thinking it would be a shoe in for repeater linking... The problem with remote linking using IRLP and others is that you have to have a computer on site for it to work. That is a problem with lightning, spikes and hea...

Try This Non-PDF URL

http://www.digitalacoustics.com/oem.htm

Thanks for the info... Wow... this the first I've seen of a unit that doesn't need a server or local computer... I seems like it would work to well for linking a repeater mountain-top with wifi and the module... with no on site computer... It looks like it could be networked with multible units also...

http://www.digitalacoustics.com/datashe ... il0304.pdf

Here is the price list...

Repeater Linking Via Ethernet OEM Module

http://www.digitalacoustics.com/datasheets/ii3-m.pdf

Has anyone used this module??? It is full duplex and has PTT in both directions...

Anyone's thoughts on this module???

Phil