Batboard

eacradio

Craig, There are any number of radios that can do what you want starting around $275 and up or a good used Maxtrac or GM300 would do it. Icom makes a great little mobile, F121, that does fine at around $325 and portables as well. Be glad to help you find something. Give me a call, Danny Smith, Easte...

eacradio

It's a UHF 40 watt, 4 Channel; will do scan

eacradio

Any C model will do Type I trunking (privacy plus); Just add a personality for Type I trunking. You will have to have Lab or a system key to do it.

eacradio

There's a place in Florida that I use from time to time. Guy's name is Buzz and he's reasonable and good.

Email him at: pagerrepair@earthlink.net

eacradio

Motorola does not list one and I have not seen one anywhere else.

eacradio

Don't know what RJ45 you have. But on the 16 pin conector on the radio, Pin 2 is mic hi; pin 3 is PTT; pin 7 is ground. should be all you need for a mic.
Dan

eacradio

If you go into the Radio Wide Screen then to the Scan Configuration, there is an item for "Hang UP Box Operation". Be sure it is set for "Stop Scan". Default is "CSQ Scan" and will continue to scan and act like talk back scan.

eacradio

I have used the inversion model from Midian (VPU15) in over 50 HT1250s and they work great. Haven't tried the rolling code.

eacradio

Part Number you are looking for is 4205450V01

eacradio

In behind the power control board is a small diamond transistor. That was usually the source of the problem you describe. Also, you could have a bad antenna network module, mounted on the back where the antenna hooks up. It has to detect power to supply the 9.6 you're missing. Hope that helps. Danny

eacradio

If you have the spectra lab program, you have to go in and tell it to change heads to a standard head, then you can change it to the A5 front head. When the unit had the 9000 series head on it, it keeps looking for that head information and will not come up until you tell it to change heads.

Danny

eacradio

Have not had any trouble with FEDEX. List it as used parts. UPS is a witch

eacradio

Most all of the 16 pin boards are 9313. Just have different ROMs on them

eacradio

Basically the MC2000 local remote is $1080.00; the DC unit is $1360.00; the tone unit is $$1280.00; The MC2500 unit is $2482.00.

Hope that helps. There are other options that have to be added depending on what you're doing and what you're hooking up to.

Danny

eacradio

You can get it from Motorola, part number AAHLN9742 or build one. Nothing really in it but a switch and wiring from 25 pin plugs. Send me your Fax number and I'll send the layout to you.
Dan

eacradio

NO. Smartnet requires the smartnet prom HLN9383. Most B1, B3 units only had the 5 pin logic board.

eacradio

I believed the most recent is 5.3 and is available for download from the motorola online site.

eacradio

That's what it is. A go ahead beep. I think it's programmable in the SVR unit. Does it do it when you talk on the CDM unit? If not then it's the SVR.

eacradio

Your friend must have been in the service a very long time ago. Most of the model numbers you listed are at least 25 to 30 years old. I don't know if you'll get anything to work or not, but it's your time. I have manuals on most of the Motorola stuff you listed and I was just cleaning out my attic a...

eacradio

I have 2 of the Advisors on VHF, 157.740 and two Advisor Gold on UHF, 462.900 if that's any help. Make an offer if you need them.
Danny

eacradio

Latest upgrade is 5.3 and only a dealer can get it from Motorola; I can do the upgrade if you want to ship them to me. There are a few good additions over 2.2
Danny

eacradio

Takes a B5/C5 or better, but still will only do subfleet scan in one system

eacradio

It's on the way. Hope it'll do.
Danny

eacradio

Check out http://www.2wayprogramming.com

Don't remember if he has that one or not, but his cables are good.

eacradio

Check your PM

eacradio

Have a C6 I can send you, but I've never seen a C7 on a Maxtrac. Going from a B7 to a C6 is possible, just takes the HLN9383 prom for the logic board.

eacradio

Post it in English Please

eacradio

You can call 1-800-422-4210 and go to the extention # for Parts ID, They can tell you.

eacradio

I think it's a Maxar 50 UHF crystalled radio with DPL.

eacradio

Maxtrac and Radius 216 are the same. On the 16 pin plug, jump 15 & 16 to get internal speaker to work. Be sure it has a speaker in though, some models shipped without one if ordered that way.
Danny

eacradio

Another way to tell is the serial number. Units that do Type I only start with 626, ones that will do Type II start with 678. Hope that helps.

eacradio

The five pin logic board will only do a conventional channel as a B4 model. That unit had a T/A in place of Sub B. You have to blank the board with the Lab software and then program it as a B4. You can still do 2 systems and one conventional. You'll need a codeplug of a B4 to do it right.
Danny

eacradio

On the logic board, U804 is the EPROM that has the software for running the program for what type radio you tell it it is. For Trunking, depending on the model, it is usually a HLN9260 or HLN9435 chip. For conventional you need a HLN5569 or HLN9499 chip. The 5569 is the current one available from Mo...

eacradio

To my knowledge, The HT1000 was only 150-890mHz. No low band. You probably mean a MT1000. The number for that one is NAB6064A and is field cutable to freq.
Danny

eacradio

Not that I know of, but if it was on when the unit was turned off and you don't disconect the main A+ to the power conector, just use the ignition to turn it off, then it should stay on what ever you had it set at when it went off. Mine does.
Danny

eacradio

If this is a trunking radio, then you need to change the software chip to a HLN5569A or equivlant to make it do conventional. Then after blanking the board, tell it what you want it to be.

eacradio

The conector is a mini-uhf on all maxtracs. the B5 model is only a trunking radio. To use it on conventional, you were told right. You have to blank the board and make it a conventional radio or change it to a B7 model and put a display face on it. Takes Lab Rss to do this.

eacradio

Maxtrac 820 is a trunking radio; the only freqs you enter are the control channels that are entered in the system info screen. You also need a system key to do this.

eacradio

could be new enough to need GTX Ver 4.0; usually gives an error saying software not compatible though. Don't know what else, unless you have a bad mic conector, check the pins.
Danny

eacradio

1225 software is same for M1225, P1225 and GR1225. All in one

eacradio

after you read the radio, go to F4 then F3. you can change the model number of the radio to get the channels and such that you need. Then just program it up.
Danny

eacradio

Your HT600 will work.

the GM300 uses a different logic board to do the extra channels and I don't think you can upgrade it.

eacradio

Don,
Send me your email address and I'll try to send you what you need.
Danny
dannyls@arkansas.net

eacradio

First what did you program into it? Do you have the LAB program? If it worked before it will probably be OK, sounds like it got a bad program. Also, what error is it giving?
Danny

eacradio

Unfortunately the maxtrac trunk program will only display the last two digits of the system ID when reading the radio. The only way to know is if you have a newer radio to read or can find out what the System ID is from someone. If you can get the System ID, I know where you can get a system key.

eacradio

Pin 8 should give you an option for PL/DPL CSQ Detect. You can then program it high or low pull.

eacradio

Haven't done any VHF, but on 800 you have to turn scan on per channel. If not set up it won't scan.

eacradio

First, have you used the cable and rib before to read a 1225? Also, check the com port setting.

eacradio

I think the Programmer # is NLN3307C. It uses a whole interface and stand built together.
Danny

eacradio

It's on the way. Check your email.
Danny

Search found 60 matches

Paging

Part #

Model #