Batboard

SafetyLighting

The Inputs on the SA441 are isolated so no transformer neccesary.

SafetyLighting

JC, First off the Radio Rebroadcast wires are blue and are located on the amplifier itself. One lead goes to + the other to - on the speaker output of your radio. Polarity isn't important. If you want to add a switch for the 2way and the Fm Radio, here's how: You need a Dual Pole/Dual Throw switch. ...

SafetyLighting

I had a setup to demo my sirens indoors. I used a standard wall mounted volume control knob for home audio. I forget where I bought mine, but you could prolly get them at Tweeter, BestBuy, Home Depot ETc. http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=300-548 Follow that link, that is w...

SafetyLighting

Any custom install materials I need, I get from here:

[url]http://www.selectproducts.com/url]

They aren't cheap, but that have quality material that sometimes can't be found anywhere else.

SafetyLighting

I agree, check out the Troy Products console, I don't like the JottoDesk version because all the equipment is where you would lean your arm.

SafetyLighting

You most certainly can install a flasher on the 06 Explorer, you have to use an isolation equipped model. SoundOff Signals ET3PFISSOØØ-P is my recommendation.

SafetyLighting

Okay, kind of a strange question, but here it goes... The Chevy truck I am looking at has two antennas on it, one for OnStar and one for GPS. Now, can either antenna be used for another type of application such as scanner antenna or even a cell phone antenna? I know nothing about this kind of stuff...

SafetyLighting

I use Troy Products, and have had great luck with them.

SafetyLighting

LOLOL, this is great. With all the money spent on stupid things you could have bought some very nice equipment and done the job right. Everyone starts somewhere, but you seem to just stay on a level plane instead of improving.

SafetyLighting

FedSig and Code 3 offer the split models as well.

SafetyLighting

911EP LEDStars

SafetyLighting

Chief Smith, My apologies. I thought that after I communicated with you, everything had been taken care of. I obviously misunderstood and I sincerely apologize for that. If there is anything I can do please contact me.

SafetyLighting

what are you looking for?

SafetyLighting

LOL, hey stupid, I asked where he wanted to mount it and he replied"Wherever there's room for whatever I end up getting..." This Thread was about suggestions, and that is what I gave him, a suggestion. I know you think that there isn't anything better than Whelen, but that is your opinion ...

SafetyLighting

May want to take a look at the Carson SB008:

http://www.carson-mfg.com/siren-switchboxes.asp

SafetyLighting

Where are you mounting the unit?

SafetyLighting

I have had good luck with the Carson LBH100, and it is only 2.25" thick.

SafetyLighting

You have a total of 4 light sections right? One pair is all red, the other is red/white? You should have two Red wires going to Yellow, and two White wires going to Blue and the Brown and Blacks should all be ground. Make sure you have a good ground on all lights individually. If all lights work, bu...

SafetyLighting

Red and White should be positive and Brown and Black are Negative.

SafetyLighting

Once again, check your facts. The article/issue you are referring to is from Gary Smith, the chief of the Northfield Minnesota Police Department. It happened during the move of 911EP to Florida which was a bad time for everyone involved in 911EP. The bar was repaired, and there WAS NOT any damage to...

SafetyLighting

Yes SpectraGod, let's here the reasoning behind your statements.

SafetyLighting

right, the static is what annoys me, so I guess I'm stuck with the monitor and reset manually

SafetyLighting

Hi all, I'd like to have my Minitor V reset automatically about 10 seconds after it is alerted. I tried to use the Reset after N, but that left the squelch open and was kind of annoying because of static. So I went back to the RevertSQ which puts it into Monitor mode. Is there a way to have it rever...

SafetyLighting

I built the Programming System as per Andy Knitt, but for some reason I still can't get proper communications between the pager and computer. I checked all troubleshooting tips that were listed on his page, and all voltages were proper. Although some that were supposed to be 5 volts were actually 5....

SafetyLighting

The way the Carson Sirens SA361 is setup, when the siren isn't locked into a Wail or Yelp tone, the Momentary switch produces Horn one way and Manual the other way. When the Siren is in Wail or Yelp, the Momentary switch will override with either air horn one way or Phaser the other way. The Talon i...

SafetyLighting

thanks and good point, although I've never had a problem with it, better safe than sorry.

SafetyLighting

It has been my experience that the LS12 is comparable to the Dual Talon and other size lights for the price. Are you comparing Apples to Apples here?

SafetyLighting

lolol

SafetyLighting

I don't really blame you. I stick with them in the hopes that things will get better.

SafetyLighting

There isn't any company out there that has a perfect record, and the same goes for poor customer service.

SafetyLighting

Well, one of my local departments has 10 or 11 of them. The only problem has been moisture in the modules. They haven't had any fires or meltdowns so far, and are ordering 5 more this year. Although it may be too little too late, the customer service has come around full turn. I have been with them ...

SafetyLighting

I will be interested to see the new Linear Tir3's. I just installed my first set of new 911EP LEDStars. All I can say is Wow. They blow all other's away. I'll have to compare them to the new TIR3's when they are out.

SafetyLighting

Yes all their manuals are online, and Carson has never changed hands. They were producing for other companies and now they only sell under their own name. I love their products and their customer service is top notch. I wish more companies were like them.

SafetyLighting

I would call Carson and ask them. They do not list their Schematics online, due to patend infringement possibilities.

SafetyLighting

Use a Troy Products CC-C12 Console and all the items will fit.

SafetyLighting

Yes TWL you are correct, I have a SPS660 and it only has Comet or Double. It sounds to me like the supply is damaged.

SafetyLighting

Are you using a 13.8 volt power supply that will run 10 amps continously? Also like TWL911 said, it is not a Scan-Lock power supply, the pattern changing wire is a latching circuit which must have 12 volts continously. Whelen has a tech support department too.

SafetyLighting

Nice job. Are you a reserve officer?
[/i]

SafetyLighting

I meant to ask about the mirror lights. Nice fix on that. I was wondering why you had used that deep console when you were using all remote mount heads. I understand now. Is there A/C ducting run under the factory console or something else blocking the available room?

SafetyLighting

Looks good, I'm a little disappointed with the console though. I don't like the way the climate controls are blocked. Other than that it is a great install so far.

Keep the pics coming.

SafetyLighting

that link isn't any good

SafetyLighting

well, here is at least one problem solved for you:

http://www.whelen.com/install/140/14031.pdf

SafetyLighting

well, I have 6 coming in within a couple of months and I find it hard to believe that Chrysler would put one time use clips on the front section knowing that it will be removed for police equipment installation. So I hope you are wrong.

SafetyLighting

um, find a different company, one that knows what they are doing. Use a 1.5" hole saw to drill through the exterior housing, then use a 1" hole saw or UniBit to make the hole in the Interior reflector where you want the strobe tube.

SafetyLighting

PM sent

SafetyLighting

you need the Whelen CSL2A, let me know if you have trouble locating one.

SafetyLighting

Take a look at the New 911EP LS12. I just had a customer trade a Dual Talon for one, but it is about personal preference so you should go look at a few lights and see what you think of them.

SafetyLighting

That looks like it is a modern 80K controller. Maybe FedSig finally decided to update the control panels.

SafetyLighting

Ok, I understand what you mean. Anyone else notice a likeness of the new TIR8 to the Tomar LED's?

SafetyLighting

ok, well, thanks anyways.

Search found 132 matches

Re: Radio Reboardcast over siren Carson SA-441 ::Help::

Re: Radio Reboardcast over siren Carson SA-441 ::Help::

Re: Antennas on Chevy trucks?

Min V Reset

Min V Programming Problems