Search found 558 matches
- Wed May 17, 2023 7:33 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Spectra Programming - Serial Bus Error
- Replies: 10
- Views: 3276
Re: Spectra Programming - Serial Bus Error
Hello I just looked up on my list of motorola programs and according to it astro spectra plus rvn4186t which contains rvn4181 and rvn4185 which is software programming version r06.00.00 and works with win98 = me= nt = 2000 = and also xp windows. Theres also a spectra railroad program that is DOS onl...
- Thu Nov 10, 2022 7:06 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: HLN9383
- Replies: 3
- Views: 2534
Re: HLN9383
Hello:
Just pointing out that your replying to a 20 year old posting.
But hey never know might still want it ????
Respectfully Submitted
Satelite
Just pointing out that your replying to a 20 year old posting.
But hey never know might still want it ????
Respectfully Submitted
Satelite
- Tue Nov 08, 2022 3:23 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: MAXTRAC Ju801 fUSE
- Replies: 5
- Views: 1638
Re: MAXTRAC Ju801 fUSE
Hello:
Correction to above post i just made.
JU-802 thru JU-805 is on back side of logic bd and JU-801 is on top side.
Search here on batlabs under Maxtrac info scroll down aways to 99 ch conversion info.
Satelite
Correction to above post i just made.
JU-802 thru JU-805 is on back side of logic bd and JU-801 is on top side.
Search here on batlabs under Maxtrac info scroll down aways to 99 ch conversion info.
Satelite
- Tue Nov 08, 2022 3:16 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: MAXTRAC Ju801 fUSE
- Replies: 5
- Views: 1638
Re: MAXTRAC Ju801 fUSE
Hello: There is a fuse F-801 but theres also jumers on back side of the maxtrac HLN9313 logic bd J801 thru J-804 as i recall. Years back when i was modifying the Maxtrac usa mobile to the MAX99 canadian 99ch version we changed the J-801 thru J-804 as to open or closed as needed to gain the extra mem...
- Thu Aug 18, 2022 5:20 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Mag One BPR40 UHF RX audio howl
- Replies: 3
- Views: 2048
Re: Mag One BPR40 UHF RX audio howl
Hello: Call me nutz whatever but i had that same howling issue with motorola P100 uhf portables years back and no matter what i did it howled until i changed the housing out. Cant say for exactness why this solved the issue other than in my opinion the new case and or chassis whatever you want to ca...
- Sat Aug 01, 2020 4:20 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: GM300 mike gain
- Replies: 9
- Views: 10380
Re: GM300 mike gain
If your refering to the 438 to 470 uhf rf bd then yes theres three blue pots on the bd. Closest blue pot to the front is reference oscilator deviation adjustment. next one going towards rear is the sqeulch setting pot and youll see SQprinted on the bd next to it. Going further rear ward is a third b...
- Fri Jul 24, 2020 7:01 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Main page back ground color
- Replies: 3
- Views: 7623
Re: Main page back ground color
OH YEAH MUCH MUCH BETTER
- Wed Jul 22, 2020 7:15 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Main page back ground color
- Replies: 3
- Views: 7623
Main page back ground color
Hello:
My main page now displays black back ground and i used to have it set for another color that made it easier on the eyes.
Is there a setting i can change the back ground as i used to have by chance ?
I looked in my settings but was able to find the answer.
Satelite
My main page now displays black back ground and i used to have it set for another color that made it easier on the eyes.
Is there a setting i can change the back ground as i used to have by chance ?
I looked in my settings but was able to find the answer.
Satelite
- Mon Jun 29, 2020 4:30 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius M1225 Software Issues
- Replies: 35
- Views: 26034
Re: Radius M1225 Software Issues
Hello
Checking in and see no reply or pm so im assuming not needing any help now .
Satelite
Checking in and see no reply or pm so im assuming not needing any help now .
Satelite
- Fri Jun 26, 2020 5:51 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius M1225 Software Issues
- Replies: 35
- Views: 26034
Re: Radius M1225 Software Issues
Hello yagermeister
Im located in NW Iowa
Ill be absent to the daughters till Monday so if you reply and I don't ITS BECAUSE SHE DONE KILLED ME
Ill be back Monday the 29th and check in.
Satelite
Im located in NW Iowa
Ill be absent to the daughters till Monday so if you reply and I don't ITS BECAUSE SHE DONE KILLED ME
Ill be back Monday the 29th and check in.
Satelite
- Thu Jun 25, 2020 7:52 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius M1225 Software Issues
- Replies: 35
- Views: 26034
Re: Radius M1225 Software Issues
Hello yagermeister If You pay shipping both ways ill program them for you free as long as you have the license for the freqs or if you want some for receive only I can set tx on that ch to blank no transmit. Ill need the list of freqs wanted and tone or dpl if any. Ill program and calibrate on freq ...
- Mon Jun 08, 2020 8:42 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: off season battery maintenance
- Replies: 5
- Views: 8175
Re: off season battery maintenance
Hello: Im by no means an expert on this but ill toss in my thoughts . My concern would be that normally a battery fast chgr in my experience chgs a low battery back to full chg in aprox one hr. And that likely one week later the battery would still be fully chgd and get another not needed full chg t...
- Tue Feb 18, 2020 5:47 pm
- Forum: Radio Programming
- Topic: Radius M216 no working radmbl
- Replies: 4
- Views: 7569
Re: Radius M216 no working radmbl
Hello: The Radius M216 line was designed to be programmed in pure dos mode at 25 MHz clock speed. Yes ive read where others emulated a dos platform and slowed down there too fast clock speed with the MoSlo program but I don't have experience with that. Can you even read the radio ? Not sure if the o...
- Wed Feb 05, 2020 9:24 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Multiplier Date codes ?
- Replies: 18
- Views: 20045
Re: Multiplier Date codes ?
Hello: I realize this post is years old as I respond but it was referenced by link as info in a current posting so replied here so all could read current info. Correct Multiplier has changed from the two letter code to the numerical system back in aprox 2010 when Multiplier was bought by the new own...
- Wed Feb 05, 2020 9:13 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Saber Multiplier Battery Date codes
- Replies: 3
- Views: 7647
Re: Saber Multiplier Battery Date codes
Hello: Ok seems this needs answered. Multiplier did before 2010 use the 2 letter code on the batteries to date them in obscure inking on the batteries. Multiplier was bought out by a new owner back in approximately 2010. The new owners printed the date codes in plain easily seen sight on the batteri...
- Tue Oct 01, 2019 3:48 am
- Forum: Radio Programming
- Topic: M1225 20Ch VHF Error 58 Bad Codeplug
- Replies: 1
- Views: 5678
Re: M1225 20Ch VHF Error 58 Bad Codeplug
Hello:
First off you do not have a 20 ch VHF M1225.
A M44 is a UHF version.
So youll need the code plug for a 20ch uhf 40 watt mobile to make it work.
Satelite
First off you do not have a 20 ch VHF M1225.
A M44 is a UHF version.
So youll need the code plug for a 20ch uhf 40 watt mobile to make it work.
Satelite
- Wed Sep 18, 2019 5:57 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: World's smallest control head for Waris/Jedi
- Replies: 16
- Views: 16985
Re: World's smallest control head for Waris/Jedi
Hello: Oh yeah waaaay cool ! Id love to see this for the narrow band GM300 mobile or the M1225 mobile . I have customers with many of the older mobiles on narrow band and I could even see ham operators wanting this for the older wide band maxtracs. Size of a pack of cigarettes would be perfect for 9...
- Thu Jun 13, 2019 5:11 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Need a jumbo banana plug R1011 power supply
- Replies: 10
- Views: 11512
Re: Need a jumbo banana plug R1011 power supply
Hello: I personally don't have the Motorola power supply mentioned but I did modify a Astron 30 amp power supply with banana plugs for radio hook up ect. I used Radio Shack cat number 274-717 plug end and then bought the single female ends to put in the Astron for plugging in. I do have these in my ...
- Sat Mar 23, 2019 6:04 pm
- Forum: Radio Programming
- Topic: Motorola P-1225
- Replies: 7
- Views: 9481
Re: Motorola P-1225
Hello
Cant edit correction.
The ? further into the reply above wasn't spose to be ?
it was meant to be a /
Clarifying again = The same program for win 3.1 is the same for Win 95 /Win 98
Satelite
Cant edit correction.
The ? further into the reply above wasn't spose to be ?
it was meant to be a /
Clarifying again = The same program for win 3.1 is the same for Win 95 /Win 98
Satelite
- Sat Mar 23, 2019 5:58 pm
- Forum: Radio Programming
- Topic: Motorola P-1225
- Replies: 7
- Views: 9481
Re: Motorola P-1225
Hello: I realize this post is 4 months old as I reply. Im posting to add info for anyone in the future. No there is NOT a P1225 / M1225 DOS based program . There was however a program made that you ran on a DOS 6.2 computer with windows 3.1 installed. I have a older 386sx/16 MHz clock speed Dos comp...
- Sat Feb 23, 2019 8:18 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Any idead how far a 10 watt lsb radio would tx ?
- Replies: 5
- Views: 7604
Re: Any idead how far a 10 watt lsb radio would tx ?
Hello Karl NVW Answer to your first question : I don't plan on using this type of equipment geographicly or in any spectrum. ( Couriousity interest only) Response to not all countries allow this freq = Yes that was also one thing mentioned way back in camp that it was intended for northern Canadian ...
- Wed Feb 20, 2019 7:40 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Any idead how far a 10 watt lsb radio would tx ?
- Replies: 5
- Views: 7604
Any idead how far a 10 watt lsb radio would tx ?
Hello: Several years back while on a canadian hunt I saw a radio that had really intriqued me and always thought bout its capabilities. We were dropped into camp by a bush pilot and camp quide was one person for the week. During that week the quide was many times out helping retrieve . During hisabs...
- Thu Dec 13, 2018 6:55 am
- Forum: Base Stations, Repeaters, General Infrastructure
- Topic: Micor repeater model B84RCB3106AT questions
- Replies: 15
- Views: 12586
Re: Micor repeater model B84RCB3106AT questions
Hello: Just a mention. I myself a ham operator with base station monitoring the repeater constantly for conversation with the members wouldn't like the station cw ider transmitted with pl tone. Id prefer the id went tx carrier so my base wouldn't chime in every time the repeater id was sent. If the ...
- Thu Sep 27, 2018 10:04 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello: NO OFFENSE AND MY APOLOGY :-) Hell no I wouldn't buy another piece of crap cdm. They've been nothing but trouble. Still have old gm300 12.5 narrow band mobiles that never dropped dead on me a few had the oscillator crystal go south I had to replaced and calibrate ill admit but never had one c...
- Mon Sep 24, 2018 8:50 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello To All That Replied And Much Appreciated. Jackhackett - You and kcbooboo both are on the same thought path as I read it. I was able to remove the oscillator without damage to bd but as mentioned the oscillator is soldered underneath and I do have a hot air station with a fine pen solder statio...
- Thu Sep 20, 2018 5:10 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello:
Just found these on ebay .
Already tempature compensated and external pcs for setting the voltage to calibrate on freq per the info.
Should be the ticket id think . WWW.EBAY.COM Auction search number 200407004018 Cost $9.99 each shipping $5.50
Satelite
Just found these on ebay .
Already tempature compensated and external pcs for setting the voltage to calibrate on freq per the info.
Should be the ticket id think . WWW.EBAY.COM Auction search number 200407004018 Cost $9.99 each shipping $5.50
Satelite
- Thu Sep 20, 2018 5:01 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello:
Forgot to mention I too tried the Emergency wakeup pins 9 and 10 with no power up still dead radio with power present in control head and on various places of the circuit bd.
Satelite
Forgot to mention I too tried the Emergency wakeup pins 9 and 10 with no power up still dead radio with power present in control head and on various places of the circuit bd.
Satelite
- Thu Sep 20, 2018 4:59 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello After reading jackhacketts reply and then my further testing im inclined to believe the 16.8 oscillator crystal is defective. Ok its not available from Motorola out in the field repair and a depot repair item. But short of that im now thinking what if I removed a 16.8 oscillator crystal from a...
- Wed Sep 19, 2018 4:03 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
Re: CDM 750 and cdm1250 wont power up.
Hello Just adding info. These two cdms are mounted in tractors used for corn growing operations so in a farming tractor scenario. Both radios powered up normally from day one new and was never ignition sense. And worked fine up until say Monday it worked Tuesday dead but each other died obviously ma...
- Wed Sep 19, 2018 3:53 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: CDM 750 and cdm1250 wont power up.
- Replies: 12
- Views: 7843
CDM 750 and cdm1250 wont power up.
Hello Ok lets just talk about the cdm 750 for the moment. Its a uhf in the 463 meg band and 40 watt version. When I attempt to power up the cdm750 mobile by pressing the front button it doesn't power up How ever this mobile does have a phone dtmf pad mike on it and the dialer pad does see voltage in...
- Mon Jan 29, 2018 4:34 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Just Bought a MaxTrac, confused about plug and internal chip.
- Replies: 11
- Views: 5779
Re: Just Bought a MaxTrac, confused about plug and internal chip.
Hello: It was an option to turn on turn off the inversion scrambler in a maxtrac by double tapping the monitor button on radio when on. Obviously 1 tap turned private line off as in monitor mode and second tap would turn pl back on but also turned on scrambler. My first gut feeling also as jackhacke...
- Sun Jan 28, 2018 8:21 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Just Bought a MaxTrac, confused about plug and internal chip.
- Replies: 11
- Views: 5779
Re: Just Bought a MaxTrac, confused about plug and internal chip.
Hello: OOOOPS wow glad u guys corrected me. Didn't realize I had typed that as such . My mind was on 16 pin logic bds 16 pins and wow cant believe I said it but yes pin 10 of the 16 pin logic bd pins not pin 16. MY BAD Normally myself I just resolder a 1 or 2 amp fuse back in on the logic bd at JU80...
- Sat Jan 27, 2018 1:49 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Just Bought a MaxTrac, confused about plug and internal chip.
- Replies: 11
- Views: 5779
Re: Just Bought a MaxTrac, confused about plug and internal chip.
Hello Just an observation= The add on bd has a white sticker marked 025 which happens tp be a digital private line code . ????? And I'm reaching back many years when I repaired the maxtracs here but his model number he posted indicates its a maxtrac 300 series mobile with the high tier HLN9313 16 pi...
- Thu Dec 21, 2017 4:26 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Maxtrac 144-174 split?
- Replies: 5
- Views: 4574
Re: Maxtrac 144-174 split?
Hello: I'm confused. My American Motorola Maxtrac repair manual shows only: VHF range one as 136 to 162 MHz and VHF range two as 146 to 174 MHz for USA, Doesn't make much sense to make a radio for uncle sam in 136 to 150.8 MHz when VHF range one covered that plus. And 146 to 162 when usa has 136 to ...
- Tue Dec 12, 2017 7:13 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Maxtrac 144-174 split?
- Replies: 5
- Views: 4574
Re: Maxtrac 144-174 split?
Hello: I'm not familiar with a 144 to 174 split but yes the 146 to 174 split but. I recall rf bd numbers 4322B and 4322C being pretty much the same bds just that the B and C was newer revision of bd only. However new revision could have given the 144 bottom end that I wont say yes or no because I ho...
- Wed Dec 06, 2017 2:11 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Looking for a 2-tone decoder board
- Replies: 11
- Views: 5686
Re: Looking for a 2-tone decoder board
Hello:
I'm not even going to say I'm sure what your actually needing but just out of curiousity.
Would a Motorola 2 tone decoder bd that was used in the Motorola p1225 or m1225 mobile work ?
I think ive got one if not two in parts bin as option for 2tone for m1225 and p1225.
Satelite
I'm not even going to say I'm sure what your actually needing but just out of curiousity.
Would a Motorola 2 tone decoder bd that was used in the Motorola p1225 or m1225 mobile work ?
I think ive got one if not two in parts bin as option for 2tone for m1225 and p1225.
Satelite
- Mon Nov 27, 2017 8:24 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius GP300 Five Tone P94YPC09C5AA
- Replies: 3
- Views: 3220
Re: Radius GP300 Five Tone P94YPC09C5AA
Hello:
Didn't get all info on the one rf bd listed cant edit so add here.
HLE8062A is a 403 to 433 MHz rf bd at 12.5 kHz narrow band.
Satelite
Didn't get all info on the one rf bd listed cant edit so add here.
HLE8062A is a 403 to 433 MHz rf bd at 12.5 kHz narrow band.
Satelite
- Mon Nov 27, 2017 8:16 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius GP300 Five Tone P94YPC09C5AA
- Replies: 3
- Views: 3220
Re: Radius GP300 Five Tone P94YPC09C5AA
Hello: Its been awhile since I messed with a gp300 5 tone but as I recall . The transmit and rx were not programmed in the same area of the radio as you did the usa gp300 . Tx channels were in one spot for all tx freqs but you went to another spot to do all the receive freqs. And I do know for a fac...
- Thu Oct 26, 2017 4:22 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Really OLD Motorola pager
- Replies: 32
- Views: 79161
Re: Really OLD Motorola pager
Yeah the post may be old but a NEW MEMBER did a search and found it because he had an old vibrator he was letting us all know about. And I bet postee wasn't around when cow thief pulled his crap which means he wouldn't have a clue about cow thief. So why dump on him ? My feeling is welcome to the bd...
- Sat Aug 12, 2017 2:34 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Maratrac continuous duty transmit power?
- Replies: 9
- Views: 5069
Re: Maratrac continuous duty transmit power?
Hello: Just tossing this suggestion in for thoughts. Think I recall this has maybe already been done in the past and even think I read about it here on batlabs years back during monty siscos time period. Rest In Peace Monty. But I recall the heat sink on maxtracs being too small and others wanting m...
- Fri Aug 04, 2017 3:37 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: So I bought a stack of Maxtrac's at my local junk show.
- Replies: 7
- Views: 4446
Re: So I bought a stack of Maxtrac's at my local junk show.
Hello: Wow didn't expect to see a post on the Hydro MAX 99 Maxtrac. Well I do have a lot of info for you. First let it be known that the MAX99 radio software is no longer available from Motorola and hasn't been for years but your not dead in the water . Second the American maxtrac software in lo ban...
- Fri Aug 04, 2017 9:32 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Difference between a RICK and $15 repeater interface?
- Replies: 4
- Views: 3282
Re: Difference between a RICK and $15 repeater interface?
Hello: I too have used the RICK and well what was posted above is true. How ever I myself thought the RICK was a bit spendy and really majority of its abilities my end users could care less. I tried a few of the ebay repeater cables on GM300 narrow banders and got the one you could set the retransmi...
- Thu Jun 29, 2017 4:55 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Radius P110
- Replies: 7
- Views: 5159
Re: Radius P110
Hello: Absolutely ill give you my hillbilly explanation. To understand this wide band known as 25 kHz wide and the new now law narrow band 12.5 kHz wide ill explain it as this. Lets just for now say the 25 kHz wide band is a signal transmitted at 25 inches wide in the air. And lets say narrow band 1...
- Sun Apr 30, 2017 3:07 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Multi Band Antenna
- Replies: 10
- Views: 5896
Re: Multi Band Antenna
Hello: yeah I ran into the same issue with dual band applications with a few customers. But don't have an answer for all three bands. How ever I did offer them this option and there satisfied. Ebay auction 272506481525 Its a NMO mount 136 to 174 MHz with 2.5 db gain and a 400 to 470 MHz with 3.0 db ...
- Sat Apr 29, 2017 10:09 am
- Forum: Vehicle Radio Installs
- Topic: Remote Mount kits for MaxTrac 300
- Replies: 4
- Views: 8079
Re: Remote Mount kits for MaxTrac 300
Hello: I realize this post is about 8 months old but have info for others in future. I do know for a fact that a remote mount kit was made for the Motorola Maxtrac. I thought it was even Motorola that made it but wont swear by that. I have installed several of these maxtrac remotes and heres the dif...
- Sat Apr 29, 2017 10:03 am
- Forum: Vehicle Radio Installs
- Topic: Remote Mount kits for MaxTrac 300
- Replies: 4
- Views: 8079
Re: Remote Mount kits for MaxTrac 300
Hello: I realize this post is about 8 months old but have info for others in future. I do know for a fact that a remote mount kit was made for the Motorola Maxtrac. I thought it was even Motorola that made it but wont swear by that. I have installed several of these maxtrac remotes and heres the dif...
- Thu Mar 30, 2017 2:15 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Visar- narrow band?
- Replies: 20
- Views: 8574
Re: Visar- narrow band?
Hello:
I posted a bit too soon and realized after i was 20 miles down the road that yes splinter freqs are used but not in vhf and uhf but are used in the 800 and 900 MHz visars.
My brain forgot about the 800 and 900 models - Oooops!
Satelite
I posted a bit too soon and realized after i was 20 miles down the road that yes splinter freqs are used but not in vhf and uhf but are used in the 800 and 900 MHz visars.
My brain forgot about the 800 and 900 models - Oooops!
Satelite
- Thu Mar 30, 2017 9:40 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Visar- narrow band?
- Replies: 20
- Views: 8574
Re: Visar- narrow band?
Hello: Well shoot I'm going to have to say this as a fact in my testing I just did. The Visar model number HO5KDD9AA4AN does do all the 12.5 freqs even the new added freqs per my testing just now. Yes I did find where you could set a channels as narrow band or wide band on a per ch basis so you coul...
- Thu Mar 30, 2017 7:37 am
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Visar- narrow band?
- Replies: 20
- Views: 8574
Re: Visar- narrow band?
Hello: I looked at the visar models info here on batlabs and I think I'm right but here goes. I do have 3ct VHF 16ch visars all model number HO5KDD9AA4AN Ok if I got this right this model as all visars do Will do 12.5 narrow band and 25 wide band both as is from factory. But the splinter freqs I gat...
- Thu Mar 16, 2017 2:13 pm
- Forum: General Motorola Solutions & Legacy Radio Discussion
- Topic: Visar- narrow band?
- Replies: 20
- Views: 8574
Re: Visar- narrow band?
Hello: I was thinking but not sure here but wasn't the visar ordered as narrow band or wide band so if it was ordered as wide band its always a wide band unless components changed ? I know for a fact the GP300 was ordered one or the other and was not by rss programmed one or the otheras an option pe...