Needed: 45.0 Micor Channel elements for base

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
George
Posts: 265
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Needed: 45.0 Micor Channel elements for base

Post by George »

Looking for 45.0 channel elements for a Micor base. Both Transmit and Receive

Anyone have any in the drawer they wish to sell?
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: Needed: 45.0 Micor Channel elements for base

Post by fineshot1 »

I am assuming you need KXN1024 RX and KXN1028 TX Elements.
If you can confirm later when i get home i will look in my box
and see if I have them and get back to you via pm.
fineshot1
NJ USA
KitN1MCC
Posts: 1890
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: Needed: 45.0 Micor Channel elements for base

Post by KitN1MCC »

nice to see an old micor still in service
George
Posts: 265
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Re: Needed: 45.0 Micor Channel elements for base

Post by George »

I think it's kxn1028 and K1003, or is it K1004? KXN1028 for TX and K1003/4 for RX. I forget which.
Yes, I have a customer that needs to recrystal a base and has a need for new deployment.
When was the last time you saw a low band 1/4 wave on a body mount on a vehicle?
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: Needed: 45.0 Micor Channel elements for base

Post by fineshot1 »

George wrote:Looking for 45.0 channel elements for a Micor base. Both Transmit and Receive

Anyone have any in the drawer they wish to sell?
Sorry George, i no gots - everything i have is VHF-Hi band.
fineshot1
NJ USA
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: Needed: 45.0 Micor Channel elements for base

Post by d119 »

There's no band like low band.
KitN1MCC
Posts: 1890
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: Needed: 45.0 Micor Channel elements for base

Post by KitN1MCC »

George

Mass state police still has them. I have 2 on my truck. i found the brand new 1/4 to be junk i scavage for old ones
impalass427
Posts: 30
Joined: Mon Feb 09, 2009 10:42 am

Re: Needed: 45.0 Micor Channel elements for base

Post by impalass427 »

I have about 200 micor elements, closest I have was a receive on 45.1000 but I will check wednesday at the shop.
BTW, i still use a 100w micor on low band, been licensed there for over 35 years. Don S
George
Posts: 265
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Re: Needed: 45.0 Micor Channel elements for base

Post by George »

Thank you for looking. I'll await your response.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”