RIBless cable for EX600 series handheld?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
boxgranch
New User
Posts: 1
Joined: Wed Oct 03, 2018 9:39 am

RIBless cable for EX600 series handheld?

Post by boxgranch »

I am a comm officer in a volunteer organization and we have several like new EX600 radios that were donated. We have the software from Motorola, but no RIB. I did some searching here, but didn't see a confirmed successful use of a RIBless cable to program these things. Has anyone found one that works? If so, any tips? If I can get them programmed, I suspect they will be well liked since the are smaller and lighter than our EF Johnson 5100's.

My pardons if I missed the post with this answer.

Thanks!
bstafford
New User
Posts: 14
Joined: Fri Dec 12, 2014 11:49 pm

Re: RIBless cable for EX600 series handheld?

Post by bstafford »

I have no experience with it, but I know that kawamall makes one. I have 5 cables from them and had very good success with their cables in the past. I should note that I use serial cables whenever possible to eliminate USB driver issues.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”