Keyup Nucleus

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
MotoFAN
Posts: 1054
Joined: Thu Jun 28, 2007 6:46 am
What radios do you own?: Approx. 50: Moto & Kenwood

Keyup Nucleus

Post by MotoFAN »

Hi all!

What is the easiest way to keyup Nucleus? It mist be some way to set it in TX mode. This unit is VHF TX (regular 100W version) with UHF2 RX module installed.

ACM is set to default setting.

I can supply RF carrier of any frequency, AF signal or POCSAG transmission if needed.

Thanks!
I am biggest fan of XTS2500 and ASTRO Digital Saber.
User avatar
Astro Spectra
Posts: 668
Joined: Sat Sep 22, 2001 4:00 pm

Re: Keyup Nucleus

Post by Astro Spectra »

Have you read this? Might have some useful pointers:

http://www.repeater-builder.com/motorol ... ticle.html
User avatar
MotoFAN
Posts: 1054
Joined: Thu Jun 28, 2007 6:46 am
What radios do you own?: Approx. 50: Moto & Kenwood

Re: Keyup Nucleus

Post by MotoFAN »

Yes, but I am not looking for any HW mods. I want to key it up by some native way. Like sending a transmission on 'link' frequency (they usually were around 458 MHz) in my area.
I am biggest fan of XTS2500 and ASTRO Digital Saber.
Karl NVW
Posts: 174
Joined: Wed Sep 03, 2003 7:13 am

Re: Keyup Nucleus

Post by Karl NVW »

Nucleus cannot be keyed that way while running in simulcast mode.
Karl - WA8NVW AFA5VB
SHARES + NCS
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”