Minitior 5

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
firefighter30
New User
Posts: 2
Joined: Wed Nov 26, 2014 1:08 pm

Minitior 5

Post by firefighter30 »

Hi guys I sent one of my 5's for a board repair and when I got it back its was only a single chl pager, I sent them a 2 chl pager...go figure..never the less I am looking for the modified software to program the pager and get it back in service, I don't do this for a business only for my Fire Dept. Were trying to save money anywhere we can and be able to help our community... I know I don't have to preach this to anyone for were all on the same boat i suspect..any help is great!!

Thanks All

Andrew
D/C ARVFD
User avatar
jfyrfytr25
Posts: 20
Joined: Sun May 11, 2008 5:06 pm

Re: Minitior 5

Post by jfyrfytr25 »

You have to modify the CPS to engineering mode. then you can make those types of mods to the Pager. The instructions can be found here: http://batboard.batlabs.com/viewtopic.p ... ering+mode
APX 7000 w/FPP
APX 6000XE w/FPP
Post Reply

Return to “Motorola Digital and Voice Paging”