Page 1 of 1

2014 Utility Interceptor Brake, Tail light, kill switch

Posted: Wed Mar 19, 2014 5:49 am
by jdw911
I am checking to see if anyone has done a kill switch to kill brake lights, tail lights and reverse lights in a new 2013 or 2014 ford police interceptor utility. In the upfitter guide it says go to section two but can't seem to find out to do it as they don't want you to splice into the wiring.

Any thoughts or recommendations.

Thanks

Re: 2014 Utility Interceptor Brake, Tail light, kill switch

Posted: Sun Mar 23, 2014 6:46 pm
by spectragod
jdw911 wrote:I am checking to see if anyone has done a kill switch to kill brake lights, tail lights and reverse lights in a new 2013 or 2014 ford police interceptor utility. In the upfitter guide it says go to section two but can't seem to find out to do it as they don't want you to splice into the wiring.

Any thoughts or recommendations.

Thanks
IIRC, the brake wire is blue with a gray tracer going into the BCM on the drivers side, you can split it there "before" the BCM, I understand that is "safe", I would have to check my notes at work to verify the color combo though.