LFL Liberty Flash Pattern
Moderator: Queue Moderator
LFL Liberty Flash Pattern
Quick question. LFL Liberty with cencom gold controller. Do you have to program the controller so that one of the buttons is used to change the flash pattern or does the light bar have a pattern change wire? both?
Re: LFL Liberty Flash Pattern
The pattern wire is located with the rest of the control wires in that same cable. You can either:
1-Sacrafic a button on the cencom and use the cencom to change the pattern
2-Install a momentary switch next to the Cencom (or any other place) to do the same thing
3-Place the bar in "action scan" and not worry about the extra wacker options available
1-Sacrafic a button on the cencom and use the cencom to change the pattern
2-Install a momentary switch next to the Cencom (or any other place) to do the same thing
3-Place the bar in "action scan" and not worry about the extra wacker options available
Lowband radio. The original and non-complicated wide area interoperable communications system
Re: LFL Liberty Flash Pattern
Ok, can you tell me which wire it is?
Re: LFL Liberty Flash Pattern
http://www.whelen.com
On that site is a section for install guides for just about every product...all in pdf.
On that site is a section for install guides for just about every product...all in pdf.
Lowband radio. The original and non-complicated wide area interoperable communications system