I was wondering what sort of load the System 9000 Siren/ PA box expects for a speaker, and what I could place on it as a load.
I understand that there are three settings, the 80, 100 and 135 Watt jumper/wire combinations, but could I install two 100w speakers and just not drive them with the full power?
I just cant find anything else on this topic between motorola and or anywhere else!
Any help is appreciated, Thanks!
System 9000 Siren / PA box
Moderator: Queue Moderator
-
- New User
- Posts: 28
- Joined: Tue Apr 14, 2009 4:24 pm
Re: System 9000 Siren / PA box
11-ohms. I believe the settings are 65W, 100W, and 135W. To run more than 100W, the 65-ohm settings are used and dual speakers attached to the siren output (IIRC, but the book isn't in front of me.)jorenwendschuh wrote:I was wondering what sort of load the System 9000 Siren/ PA box expects for a speaker, and what I could place on it as a load.
I understand that there are three settings, the 80, 100 and 135 Watt jumper/wire combinations, but could I install two 100w speakers and just not drive them with the full power?
I just cant find anything else on this topic between motorola and or anywhere else!
Any help is appreciated, Thanks!