I have a MW800 mounted in my vehicle and am in the process of installing a NXT Kustom Signals Digitla Video System that is controlled via the Computer/MW800. The MW800 has a built in video BNC jack which I put and RCA adapter on as the video from the Kustom Unit (its basically a carputer made specifically for Kustom) runs out to a RCA connector.
The Kustom software isn't initializing the MW800 video in port as it is meant to be used with a Belkin video capture device that runs into USB. I WANT TO USE THE BUILT IN MW800 VIDEO IN PORT. Is there some small application that I can use to initialize the MW800 video in port upon computer start up so its turn on to TUNER input?????
If I run a video capture sfotware (free download from the net) which does activate the MW800 video capture in, then I can run the Kustom Signals software and get video. I'd like to have some "simple" application that runs on start up just to initialize the MW800 video input.
Any ideas are welcome.
Thanks
Jason
- Board index Off-Topic Discussion Computer/Technical Assistance
- Search
-
- It is currently Fri Mar 29, 2024 7:11 am
- All times are UTC-08:00
MW800 Video In Issue
This forum is dedicated to the general computer related issues we all come across on a daily basis, such as e-mail/Internet/Operating System/virus/spyware, etc questions & problems.
As we are primarily a radio discussion group, your mileage may vary on the responses.
As we are primarily a radio discussion group, your mileage may vary on the responses.
Moderator: Queue Moderator
Return to “Computer/Technical Assistance”
Jump to
- Administrative
- ↳ Announcements and Forum News
- ↳ Forum Rules
- General
- ↳ General Motorola Solutions & Legacy Radio Discussion
- ↳ Radio Programming
- ↳ Software & Firmware Releases & Issues
- ↳ Codeplug Information
- ↳ NFPA 1802 Discussion
- Current Motorola Solutions Public Safety / Astro Product Line
- ↳ APX NEXT
- ↳ APX Series Subscribers
- ↳ ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers
- ↳ ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
- ↳ ASTRO Experimental - How to do things a little out of the box
- ↳ ASTRO Products Feature Requests & Future Speculation
- ↳ Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum
- Current Motorola Solutions Professional / Business Product Lines
- ↳ MotoTRBO ION Devices
- ↳ Motorola CP/CM Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers
- ↳ MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
- ↳ MotoTRBO Repeaters, Trunking, and Site Infrastructure
- ↳ MotoTRBO 3rd Party Application Discussion & Support
- ↳ MotoTRBO/Business Products Feature Requests & Future Speculation
- ↳ Experimental - How to do things a little out of the box
- Motorola System Infrastructure (Consoles, Base Stations, Repeaters, Trunking, etc.)
- ↳ Smartnet/Smartzone/Project 25 (Phase I/II) Systems
- ↳ Base Stations, Repeaters, General Infrastructure
- ↳ Consoles
- ↳ Experimental - Mods, and how to do things a little out of the box
- ↳ Infrastructure Product Feature Requests & Future Speculation
- Focused Discussion
- ↳ Motorola Digital and Voice Paging
- ↳ Converting Motorola Equipment to 900MHz Amateur
- ↳ Test Equipment & RF Equipment Alignment
- ↳ Vehicle Radio Installs
- ↳ Experimental and Next Generation LMR
- ↳ Motorola Digital Radio Compatability
- Off-Topic Discussion
- ↳ Vehicle Warning Equipment Discussion
- ↳ Computer/Technical Assistance
- ↳ Knowledge Base