Radius M10 - Cant program 16 pin option connector

[ChrisNYC]

I've got a UHF M10 that has the 16 pin option connector but the RSS, (GM300, GR300, M120, M10, M130) Version R05.00.00 doesn't give me the F9 option to program it in the Radio Wide configuration page. Am I using the wrong RSS?

[Jim202]

I've got a UHF M10 that has the 16 pin option connector but the RSS, (GM300, GR300, M120, M10, M130) Version R05.00.00 doesn't give me the F9 option to program it in the Radio Wide configuration page. Am I using the wrong RSS?

No way of telling unless you provide which flavor of the RSS your using.

[ChrisNYC]

This would be the Americas Radius GM300, GR300, M120, M10, M130 R05.00.00 HVN8177A version.

[PETNRDX]

The M10's were "low tier" radios, and I have never seen one with capability to program the acc pins.
They had the masked logic board (all the ones I have ever seen) so they were very basic, just like a 6 ch GM.
Then again, with Motorola, they made MANY different versions of things.
I would not expect to be able to program acc pins in any low tier model.