Radius M10 - Cant program 16 pin option connector

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
ChrisNYC
New User
Posts: 11
Joined: Fri May 23, 2008 11:02 am

Radius M10 - Cant program 16 pin option connector

Post by ChrisNYC »

I've got a UHF M10 that has the 16 pin option connector but the RSS, (GM300, GR300, M120, M10, M130) Version R05.00.00 doesn't give me the F9 option to program it in the Radio Wide configuration page. Am I using the wrong RSS?
Jim202
Posts: 3609
Joined: Sun Sep 09, 2001 4:00 pm

Re: Radius M10 - Cant program 16 pin option connector

Post by Jim202 »

ChrisNYC wrote:I've got a UHF M10 that has the 16 pin option connector but the RSS, (GM300, GR300, M120, M10, M130) Version R05.00.00 doesn't give me the F9 option to program it in the Radio Wide configuration page. Am I using the wrong RSS?


No way of telling unless you provide which flavor of the RSS your using.
ChrisNYC
New User
Posts: 11
Joined: Fri May 23, 2008 11:02 am

Re: Radius M10 - Cant program 16 pin option connector

Post by ChrisNYC »

This would be the Americas Radius GM300, GR300, M120, M10, M130 R05.00.00 HVN8177A version.
PETNRDX
Posts: 868
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

Re: Radius M10 - Cant program 16 pin option connector

Post by PETNRDX »

The M10's were "low tier" radios, and I have never seen one with capability to program the acc pins.
They had the masked logic board (all the ones I have ever seen) so they were very basic, just like a 6 ch GM.
Then again, with Motorola, they made MANY different versions of things.
I would not expect to be able to program acc pins in any low tier model.
Steve K.
Post Reply

Return to “Radio Programming”