CDM flash updating

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
New User
Posts: 41
Joined: Tue Apr 05, 2016 1:43 pm

CDM flash updating

Post by OldDawg »

I donno what I'm doing wrong here.....I hit the "program" button in the mobile fw application....the radio beeps.....shows "program" on the on/off 2x, waiting a second between presses, and the radio won't go into the bootstrap powers off after the 1st press and powers on after the 2nd press......multiple radios...same same......

Any ideas?
User avatar
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: CDM flash updating

Post by wavetar »

Are you using either the RLN4853 Adapter or the AARKN4083 Programming Cable, to interface into the accessory connector, along with the HLN9742 Flash Adaptor?
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Post Reply

Return to “Radio Programming”