MTX (Waris) Programming Software

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
HarrisonRHW
Posts: 61
Joined: Thu Mar 06, 2008 6:28 am
What radios do you own?: Waris Stuff

MTX (Waris) Programming Software

Post by HarrisonRHW »

Does it use the same CPS as the HT/CDM models or does it require it's own software? I searched on the board, but couldn't find a clear answer.
Batwings21
Posts: 930
Joined: Fri Jun 23, 2006 11:21 am

Re: MTX (Waris) Programming Software

Post by Batwings21 »

No, it uses its own. The name escapes me at the moment but it something like trunking professional cps.
User avatar
VE9MP
NOT ALLOWED TO BUY/SELL/TRADE
Posts: 429
Joined: Wed Jan 05, 2005 11:38 am
What radios do you own?: FPP Railroad XTL9000 Cleancab

Re: MTX (Waris) Programming Software

Post by VE9MP »

Motorola Trunking Professional CPS
Latest Release: R02.00.02
Part Number: HVN9067
-----Nick-----

"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
User avatar
smile@2006
Posts: 54
Joined: Thu Jan 26, 2006 7:51 pm
What radios do you own?: XTS2500 XTL2500 ATS2500

Re: MTX (Waris) Programming Software

Post by smile@2006 »

New version:
R02.03.00 HVN9065 (MTX8250)
R02.03.00 GMVN4001/GMV4002 (GP580)

Contatc M dealer
User avatar
HarrisonRHW
Posts: 61
Joined: Thu Mar 06, 2008 6:28 am
What radios do you own?: Waris Stuff

Re: MTX (Waris) Programming Software

Post by HarrisonRHW »

Thanks for the help... will see the Motorola dealer about programming costs as I don't have the license for this software. Nee to pick up new chargers anyway (rolls eyes)
la1cha
New User
Posts: 2
Joined: Fri Jun 19, 2015 8:45 am

Re: MTX (Waris) Programming Software

Post by la1cha »

Hallo!
I have a GP580 and when I use the cps software R02.03.00 and trying to read the radio it ask for cps password.
Could someone help or is it someone that have a trunk codeplug for that radio.

Thanks
tztop10
Posts: 34
Joined: Mon Sep 29, 2014 2:08 am
What radios do you own?: HT1250 EX600XLS CDM1250 CP200

Re: MTX (Waris) Programming Software

Post by tztop10 »

the cps password is a password set on the radio, you may need to do a hex editor on the radio to remove the password, check out this thread
http://batboard.batlabs.com/viewtopic.p ... 5&p=404578
Post Reply

Return to “Radio Programming”