Motorola Purc 5000 Prom Programming

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

Post Reply
N9WZX
Posts: 15
Joined: Thu Jan 17, 2002 4:00 pm

Motorola Purc 5000 Prom Programming

Post by N9WZX »

Does anyone here on the board have the capabilities to program the prom for a purc 5000, 900mhz? please contact off the board for further discussion please. Thanks, Mike. n9wzx@yahoo.com
" Aw Hech Boss" , " Any Fool Can Do It ".
WB6DGN
Posts: 252
Joined: Fri Feb 11, 2005 5:34 pm

PURC/MSF/5000 Programming

Post by WB6DGN »

I am going to be needing some programming in the not too distant future as well. If any of those that replied to the original post would care to, please let me know details (price, etc.) and whether you can supply the 2716's or whether I need to provide them.

Thanks,
Tom KB5DPE
User avatar
Andy Brinkley
Batboard $upporter
Posts: 376
Joined: Mon Sep 03, 2001 4:00 pm
What radios do you own?: FMR80D and a Motrac with Scan

Purc Programming

Post by Andy Brinkley »

The "analog" PURC 5000 uses a 2732 eprom to store the code plug information. E-mail me direct for more info.

73's
Andy / NC4AB
n8obu
Posts: 93
Joined: Wed Nov 14, 2001 4:00 pm
What radios do you own?: more than i can list

purc 500 programing

Post by n8obu »

andy and burnie both do a great job with proms .. be worned that when you frist fire up your purc 5000 9oomhz that it will seem to be way off freak they must be given at least 45 mins to settle down i have many of these and parts too what i did was had them make up an image from a prom and burned my own if you are able to do this i might be able to send you an prom image
http://n8obu.com/
http://photos.n8obu.com/gallery/Repeater
WB6DGN
Posts: 252
Joined: Fri Feb 11, 2005 5:34 pm

PROM Programming

Post by WB6DGN »

Thanks for the comments. Will contact when I'm ready to program.

73 Tom KB5DPE
Post Reply

Return to “Converting Motorola Equipment to 900MHz Amateur”