Page 1 of 1

Any gear that does 939 simplex 927 simplex and 927 ham split

Posted: Sun Jan 27, 2008 6:09 pm
by Grog
Hey guys, is there any gear that will cover the business section (939 area) as well as the ham repeater split at 927mhz as well as ham simplex use on 927mhz?

Re: Any gear that does 939 simplex 927 simplex and 927 ham split

Posted: Sun Jan 27, 2008 7:08 pm
by W6JK
GTXs will do it, as will some Jedis.

'JK

Re: Any gear that does 939 simplex 927 simplex and 927 ham split

Posted: Sun Jan 27, 2008 7:33 pm
by Grog
I would prefer a Jedi since we use MTX9000s at work and I have a tone of personal Jedi stuff. Is there anyway to tell what Jedis will do it without getting too involved?

Re: Any gear that does 939 simplex 927 simplex and 927 ham split

Posted: Mon Jan 28, 2008 12:34 pm
by W6JK
No, you have to try it and see. Some will do it as they come, and some will do it after making some adjustment with Labware. Some, apparently, are immune even to that. My approach was to keep buying radios until I found a couple that worked. They turned out to be MTS2000s, but others have had trouble with those too. None of my MTX9000s will do it, but again, others have found differently.

Jeff

Re: Any gear that does 939 simplex 927 simplex and 927 ham split

Posted: Mon Jan 28, 2008 12:58 pm
by n7maq
The Kenwood TK931 should do it.

Jim

Re: Any gear that does 939 simplex 927 simplex and 927 ham s

Posted: Tue Oct 01, 2013 12:25 pm
by phrawg
The EF Johnson 900 Mhz ascend series will do it
after using modofied programming software.

Re: Any gear that does 939 simplex 927 simplex and 927 ham s

Posted: Tue Oct 01, 2013 12:51 pm
by MSS-Dave
Kenwood TK 481 and 981 do this fine.

Re: Any gear that does 939 simplex 927 simplex and 927 ham s

Posted: Fri Oct 11, 2013 4:56 pm
by mike m
Ge. MPA with hamflash FPP and vco hardware mods works also but the hamflash requires an old dos PC and the hardware mods are not easy to find these days since a pack rat ate the original files a couple of years ago.