IPSC connect issue

Moderator: Queue Moderator

Post Reply
User avatar
FMROB
Posts: 1002
Joined: Sun Jan 12, 2003 2:28 pm

IPSC connect issue

Post by FMROB »

Hello All,

I have an issue with an IPSC system. I have 4 repeaters in the system now, with the original 3 working flawlessly. When I added the 4th repeater, it will only get traffic from the system, and send traffic that is rx'd to two of the three existing repeaters. All the port settings are identical, so I am not certain what might be causing the problem? Has anyone ever seen this happen before.

Thanks, Rob
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: IPSC connect issue

Post by escomm »

Firmware versions in each repeater?
User avatar
FMROB
Posts: 1002
Joined: Sun Jan 12, 2003 2:28 pm

Re: IPSC connect issue

Post by FMROB »

Ok, you caught me there. I was planning an update once we do the EID for RAS. I'm a bit lazy sometimes.

Master Repeater : 01.07.02
New Repeater just added : 01.06.11
Repeater new repeater doesn't like to talk to: 01.04.01
East Repeater : 02.30.02

Rob
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: IPSC connect issue

Post by escomm »

Repeater new repeater doesn't like to talk to: 01.04.01

This is older than dirt
User avatar
FMROB
Posts: 1002
Joined: Sun Jan 12, 2003 2:28 pm

Re: IPSC connect issue

Post by FMROB »

Off I go to do f/w bumps. Thx for the heads up, rob
User avatar
FMROB
Posts: 1002
Joined: Sun Jan 12, 2003 2:28 pm

Re: IPSC connect issue

Post by FMROB »

F/W issue it were, thanks all.
Post Reply

Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”