XPR4550 Remote Kit

Moderator: Queue Moderator

Post Reply
firemedic2150
Posts: 18
Joined: Sun Jul 07, 2002 3:46 am

XPR4550 Remote Kit

Post by firemedic2150 »

I was wondering if you can connect the microphone directly to the brick or through a microphone extension cable and then have the data cable connect the head back to the brick, or does the microphone cable that is part of the kit have to be used and have the microphone audio go through the head first.
JRayfield
Posts: 44
Joined: Tue Jan 20, 2009 9:33 pm

Re: XPR4550 Remote Kit

Post by JRayfield »

The Remote Kit does not use the accessory connector on the radio (the 'brick', as you call it). So, a remote mike can be connected to the accessory connector and the control head can still be connected. We've done this in ambulances, where they needed a remote microphone and speaker in the back of the ambulance.

John Rayfield, Jr.
Rayfield Communications
Springfield, MO
www.rayfield.net
ve3nsv
Posts: 291
Joined: Sat May 27, 2006 8:43 am

Re: XPR4550 Remote Kit

Post by ve3nsv »

You can plug the mic directly into the brick as well and not use the extension cable that comes with the separation kit.
Post Reply

Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”