Xpr 4550 locked?? Solid tone sounding when powered o?

Moderator: Queue Moderator

Post Reply
NCradiorca5w
New User
Posts: 1
Joined: Thu Feb 25, 2016 4:29 pm

Xpr 4550 locked?? Solid tone sounding when powered o?

Post by NCradiorca5w »

Hi, newbie here I have a xpr 4550 that I purchased. Radio powers up, lights display all function. After the radio boots up it emits a solid "tone" from the speaker. It's volume can be controlled with the volume knob. No other buttons function or change anything. The radios firmware was upgraded today and a dmr code plug programmed in to it today. The radio shows the first zone in the code plug on the display and was successfully programmed according to the pc. Is there a trick, dance, or a part I need here. Thanks so much in advance.
256QAM
Posts: 67
Joined: Fri Oct 14, 2011 3:29 pm

Re: Xpr 4550 locked?? Solid tone sounding when powered o?

Post by 256QAM »

Have you tried reverting to the previous good working codeplug you have archived?
Post Reply

Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”