So I got an APX 7000 that I want to use on VHF. Got it cheap because it had an RF problem. I got a new Transceiver board and instated it.
Now I get Fail 01/A2. I'm pretty sure that's because the Tuner data is not there, but how do you fix this? I can't read the Tuner info or write it and I have read and written the Codeplug data, but still the same thing.
I must be missing what the actual procedure is?
Thanks!
APX 7k - Help Fail 01/A2
Moderator: Queue Moderator
Re: APX 7k - Help Fail 01/A2
The Detailed Service Manual Says:
"01/A2 - The radio should be sent to the depot for reflashing of the tuning codeplug followed by re-tuning of the radio."
"01/A2 - The radio should be sent to the depot for reflashing of the tuning codeplug followed by re-tuning of the radio."
Re: APX 7k - Help Fail 01/A2
Thanks. That's a bummer. WTH do they sell the RF board for replacement?
-
- Posts: 930
- Joined: Fri Jun 23, 2006 11:21 am
Re: APX 7k - Help Fail 01/A2
Check your PM's.
-
- Posts: 211
- Joined: Wed Aug 04, 2010 7:49 pm
Re: APX 7k - Help Fail 01/A2
Batwings21 wrote:Check your PM's.
My APX7000 FW is R07, After changed RF board ,now display: Fail 01/A2
,rewrite codeplug still like that , how can I resolve this by myself? thanks!
Re: APX 7k - Help Fail 01/A2
Wouldn't you like to be a fly on the wall in THAT pm!Batwings21 wrote:Check your PM's.
Kinda defeats the purpose of the board...
-
- Posts: 930
- Joined: Fri Jun 23, 2006 11:21 am
Re: APX 7k - Help Fail 01/A2
Well if people here didn't have reputations prohibiting the sharing of useful information then i would have just posted it in the open. As I've already been told on multiple occasions the things that interest me shouldn't be talked about here then I do it via PM or on another site. Thats the side effects of what has happened around here in recent years.
Re: APX 7k - Help Fail 01/A2
Well then, CC me on the PM!!!