XTS3000 PTT-ID Display issue

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
MTS2000
Posts: 245
Joined: Sun Sep 16, 2001 4:00 pm
What radios do you own?: HT1550, XTS3000, XTS5000

XTS3000 PTT-ID Display issue

Post by MTS2000 »

Hello all,

I have a XTS3000 UHF low split that has the H14 option in it. I have MDC enabled on several conventional channels. In the Display/Menu screen I have the Display PTT-ID check marked. I also have the Scan PTT-ID checked. When I have the radio in scan it will Display the MDC ID's even Astro ID's. But when I'm parked on a channel with MDC enabled it will not decode the PTT-ID. I do have DOS setup in the MDC system but doesn't seem to affect it while in scan mode.

Any ideas as to what I'm doing wrong or what setting I have wrong for it to not decode MDC ID's outside of scan mode??


Thanks
Top
MTS2000
Posts: 245
Joined: Sun Sep 16, 2001 4:00 pm
What radios do you own?: HT1550, XTS3000, XTS5000

Re: XTS3000 PTT-ID Display issue

Post by MTS2000 »

Bump so any ideas from anyone???
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”