Apx7500 programming

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
tigerv
New User
Posts: 3
Joined: Mon Nov 17, 2014 1:00 pm

Apx7500 programming

Post by tigerv »

we have an APX7500 consolette. We have found where to turn on tone remote, and know what function tones to provide, but need to know where to set what we want each function to do. For instance I want function one to go to zone one channel 1. Function to zone one channel 2, etc. Where in the code plug do I set that at?
Squad5
was mwb9122
Posts: 707
Joined: Thu Jan 28, 2010 8:46 pm

Re: Apx7500 programming

Post by Squad5 »

Have you read the help files in the CPS?
tigerv
New User
Posts: 3
Joined: Mon Nov 17, 2014 1:00 pm

Re: Apx7500 programming

Post by tigerv »

We have attempted to find information in the help files about functions and tone remote control, but have found nothing. Actually, the software does not include the settings for tone remote control, you have to enter the web based menus of the radio
tigerv
New User
Posts: 3
Joined: Mon Nov 17, 2014 1:00 pm

Re: Apx7500 programming

Post by tigerv »

Page 4-8 of the 68009482001C says "The frequencies can be mapped to functions in the Consolette codeplug."
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”