Looking for part number for just the thumb screw for the above speaker mic. I believe it is common to all the 7K Mic's and programming cables.
Thank you in advance..
radio43
APX7K Speaker Mic (HMN4104) Thumb Screw
Moderator: Queue Moderator
- RADIO43
- Batboard $upporter
- Posts: 743
- Joined: Thu Oct 17, 2002 10:46 pm
- What radios do you own?: 900 MHZ APX4000
APX7K Speaker Mic (HMN4104) Thumb Screw
In Time of Crisis, You will Not Rise to the Occasion but Rather Default to your Level of Training!
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
Looking for the same part number, I have had a few strip out. My Motorola dealer got replacement screws (at $15 each) and they were the "low profile" type that requires a screw driver to use.
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
The only decent thumbscrew I've seen for the APX/TRBO speaker/mic connection came to me with a cheap-but-okay aftermarket speaker/mic. It is literally a thumb screw that you turn with your thumb and index finger and it beats the hell out of the standard Motorola attachment screw.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
I called parts about this a while back, had to scavenge one out of a speaker mic for my programming cable. They couldn't locate a part number for the thumbscrew. May have to go to the Fastenal store and see what they've got.
- RADIO43
- Batboard $upporter
- Posts: 743
- Joined: Thu Oct 17, 2002 10:46 pm
- What radios do you own?: 900 MHZ APX4000
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
Here is what I got back from Motorola when a case was opened:
"Unfortunately we do not offer the thumbscrew as a replacement part, if it helps, I can tell you the thread type is a 4-40 UNC."
"Unfortunately we do not offer the thumbscrew as a replacement part, if it helps, I can tell you the thread type is a 4-40 UNC."
In Time of Crisis, You will Not Rise to the Occasion but Rather Default to your Level of Training!
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
Sounds like its time to dust off the old McMaster-Carr catalog!
http://www.mcmaster.com/#thumb-screw-fasteners/=ed7buz
http://www.mcmaster.com/#thumb-screw-fasteners/=ed7buz
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
Grainger part 5RA59, $2.88 each, works perfectly. Received a few this morning.
Re: APX7K Speaker Mic (HMN4104) Thumb Screw
Thanks for posting the Grainger screw, will try that.