XTS5000 Firmware R4 to R16
Moderator: Queue Moderator
XTS5000 Firmware R4 to R16
I am trying to upgrade the firmware in my XTS5000 portable. It gets ready to write to the radio and then the port just closes and it read unable to upgrade radio and then it says host failed to upgrade.
Is the jump from R4 to R16 too big, should I try and load a older firmware instead? Any Ideas?
Is the jump from R4 to R16 too big, should I try and load a older firmware instead? Any Ideas?
Re: XTS5000 Firmware R4 to R16
Which CPS version are you using to do this?
Re: XTS5000 Firmware R4 to R16
R7. I used it before to upgrade an R12 to R16 but for some reason this Radio will not take it
Re: XTS5000 Firmware R4 to R16
Would R16 CPS help if I tried it there?
Re: XTS5000 Firmware R4 to R16
The worst thing it can do is tell you the same thing R7 is telling you.
You *ARE* using a flash key to do the upgrade, correct?
You *ARE* using a flash key to do the upgrade, correct?
Re: XTS5000 Firmware R4 to R16
Yes, It loads the bootstrap and when it begins to download, it just stops and then says closing port and then shoots me the upgrade fail. I have this same error on 2 radios with this ancient firmware
Re: XTS5000 Firmware R4 to R16
You should use CPS 16 to load R 16 F/W so the codeplug structure is updated correctly anyway (as long as you use a refresh key no CP update if you don't use the key to refresh the F/W.)mwb9122 wrote:Yes, It loads the bootstrap and when it begins to download, it just stops and then says closing port and then shoots me the upgrade fail. I have this same error on 2 radios with this ancient firmware
Re: XTS5000 Firmware R4 to R16
You also may want to try a RS232 cable instead of USB, those early radios are touchy when trying to do flash upgrades with USB. Yes, R16 CPS would be be BEST for you if you can access it.
Re: XTS5000 Firmware R4 to R16
That's an excellent point that I overlooked. I agree - with a radio this early, you should use a serial cable to perform the upgrade. There were several enhancements regarding USB released after your current firmware version, IIRC, and USB firmware upgrades may have been one of them.Jason wrote:You also may want to try a RS232 cable instead of USB, those early radios are touchy when trying to do flash upgrades with USB. Yes, R16 CPS would be be BEST for you if you can access it.
Re: XTS5000 Firmware R4 to R16
IIRC, USB programming support came around FW 3 something but USB Flash wasn't supported until later, 5 or 6 something. Some radios it will take and work, some radios get bricked.
Re: XTS5000 Firmware R4 to R16
I am currently using the Serial cable. I will let you guys know how it goes!
-
- Posts: 1307
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: XTS5000R, Astro Saber III, I
Re: XTS5000 Firmware R4 to R16
What's new in R16 that isn't in R15 ?
I currently have CPS Version 15, and from reading this thread, evidently that would create an issue if the radio had R16 ? I wouldn't think I'd have a problem programming it with CPS V. 15 if the radio has 16 in it, but who knows
I currently have CPS Version 15, and from reading this thread, evidently that would create an issue if the radio had R16 ? I wouldn't think I'd have a problem programming it with CPS V. 15 if the radio has 16 in it, but who knows
Re: XTS5000 Firmware R4 to R16
http://batboard.batlabs.com/viewforum.php?f=44MT2000 man wrote:What's new in R16 that isn't in R15 ?
I currently have CPS Version 15, and from reading this thread, evidently that would create an issue if the radio had R16 ? I wouldn't think I'd have a problem programming it with CPS V. 15 if the radio has 16 in it, but who knows
Answers you seek are in there. YOu will need CPS 16 to read/write an R16 radio...
-
- Posts: 1307
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: XTS5000R, Astro Saber III, I
Re: XTS5000 Firmware R4 to R16
Ah, guess that answers both questions
Thanks !
Thanks !
Re: XTS5000 Firmware R4 to R16
It worked correctly w/ R16. Now the radio reboots it self once you try to transmit or hit the emergency button. Radio owner never tested the Tx button before the firmware so unsure if that is it. I reloaded the firmware and it still does the same thing.
-
- New User
- Posts: 24
- Joined: Thu May 07, 2009 10:52 pm
- What radios do you own?: XTS2500,3000 MCS2000 ASTRO SPE
Re: XTS5000 Firmware R4 to R16
is that r 7 software the speical version and have you upgraded the tuner section to a much newer version ?mwb9122 wrote:R7. I used it before to upgrade an R12 to R16 but for some reason this Radio will not take it
you could try the zapflash method (using cps 16)this forces the firmware into it i have bricked a radio and was able to revive it with no problems
do a search on the internet that will give you more on the zapflash method
Re: XTS5000 Firmware R4 to R16
I got it to work. Just having an issue of the Radio rebooting itself when I try to transmit. It has the older Ram22 processor so I am going to try and bump the firmware back down to something before R14. Just need the file, which I cant find.
Re: XTS5000 Firmware R4 to R16
I'd say it more likely needs an alignment. 16 in a RAM radio should be fine other than the stuttering keypad tones isssue.
Re: XTS5000 Firmware R4 to R16
I also get the suttering keypad issue. I am currently on the hunt for R14 firmware. I have an available flash dongle just need the firmware
-
- was grem467
- Posts: 1145
- Joined: Mon Jul 21, 2003 12:46 pm
Re: XTS5000 Firmware R4 to R16
You cant downgrade firmware by any normal methods.
-
- New User
- Posts: 3
- Joined: Tue Nov 01, 2011 1:23 am
Re: XTS5000 Firmware R4 to R16
I upgrade R04 to R15.09 by Flaskzap.
It is successful.
It is successful.
- K8TEK
- "Dark Chocolate"
- Posts: 458
- Joined: Thu Apr 08, 2004 12:40 pm
- What radios do you own?: Dynatac
Re: XTS5000 Firmware R4 to R16
What is Flaskzap?cyuking5566123 wrote:I upgrade R04 to R15.09 by Flaskzap.
It is successful.
K8TEK::Tim
Re: XTS5000 Firmware R4 to R16
Check and see what your max channels are.. I bet it still says 512..cyuking5566123 wrote:I upgrade R04 to R15.09 by Flaskzap.
It is successful.
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.