COM120B Real time clock failure

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Locked
radglenn
Posts: 7
Joined: Mon Sep 27, 2004 6:20 pm

COM120B Real time clock failure

Post by radglenn »

HI!

I have a COM120B with not a lot of use on it... I went to use it and got a REAL TIME CLOCK failure in the diagnostics, The 3.7 volt battery on the controller tray is good...and the two red LEDS are flashing.

It seems to be working fine with exception of no traces on the Analyzer/Scope.. All other functions are working.....

Any Ideas where I can look????

Thanks!!!
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: COM120B Real time clock failure

Post by jry »

you double posted this ...replied in the other thread
Locked

Return to “Test Equipment & RF Equipment Alignment”