IFR 1900 CSA, Factory Reset Sequence?

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
rgpace
New User
Posts: 11
Joined: Tue Nov 10, 2015 11:52 am

IFR 1900 CSA, Factory Reset Sequence?

Post by rgpace »

Does anyone know if there is a factory reset key sequence for the IFR 1900 CSA monitor? Thanks in advance.
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: IFR 1900 CSA, Factory Reset Sequence?

Post by jry »

same as the 1600 ....RCL MEMORY ...select option 10 Factory Defaults
rgpace
New User
Posts: 11
Joined: Tue Nov 10, 2015 11:52 am

Re: IFR 1900 CSA, Factory Reset Sequence?

Post by rgpace »

Thanks, but my MEMORY RECALL options end at 9. Is there a way that you know to make option 10 visible or enabled?
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: IFR 1900 CSA, Factory Reset Sequence?

Post by jry »

may have to be in the AUX screen first and then RCL MEMORY ...select option 10 Factory Defaults
Post Reply

Return to “Test Equipment & RF Equipment Alignment”