R2600 Keeps Resetting, Help Please!

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
moztas
Posts: 44
Joined: Wed Jan 28, 2009 8:13 am

R2600 Keeps Resetting, Help Please!

Post by moztas »

Hello All,

My R2600 service monitor has been resetting by itself in every 15 to 30 minutes since two months. But now, it keeps resetting in a loop when I turn on the monitor. I can see only "RESTRICTED RIGHTS LEGEND" information and resets again, again...

I checked the power supply and +40V DC, +12V DC, +5 V DC, -12V DC and -5V DC outputs are ok. My guess, there is a problem on controller board.

Any help would be greatly appreciated. Thank you in advance.

Best Regards
moztas
Top
moztas
Posts: 44
Joined: Wed Jan 28, 2009 8:13 am

Re: R2600 Keeps Resetting, Help Please!

Post by moztas »

I just repaired my R2600. Now it is working great.

Let me share what I did, maybe it will be usefull for someone:

I resolder all companents on the controller board including ICs, resistors, capacitors and transistors and then cleaned the board by alcohol carefully.

Regards
moztas
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”