Anritsu to measure multiple channel in P25 network

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
pemmysandhu
New User
Posts: 1
Joined: Tue Oct 04, 2011 2:59 pm

Anritsu to measure multiple channel in P25 network

Post by pemmysandhu »

Hi,

Anyone has info if Anritru S412D/E is capable of measuring multiple channel signal level during drive testing for P25 trunk network? I have done drive testing for analog conventional where it measures the RSS and I had to drive around the BS where the frequency of the channel is key in. What about digital P25, can you drive thoughout a whole district and it gives the RSS and BER of all the channel adjacent to it or must you manually select the frequency to be measured? Thanks!!
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: Anritsu to measure multiple channel in P25 network

Post by Bill_G »

You'll have to check to see if yours has the scan option. You want to be able to load a list of specific freqs to scan and record.
Post Reply

Return to “Test Equipment & RF Equipment Alignment”