IFR1900 Tracking Gen. question

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
lau190
New User
Posts: 7
Joined: Fri Nov 04, 2011 3:12 am

IFR1900 Tracking Gen. question

Post by lau190 »

is possible connect ifr1900 tacking gen. output to the other spectrum analyzer?
can work like a normal tracking gen.?
I own a ifr1900 and nettek YBT350.
Thanks
Top
User avatar
Wowbagger
Aeroflex
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: IFR1900 Tracking Gen. question

Post by Wowbagger »

No, because no matter what, an analog tracking generator's sweep must be synchronized with the sweep of the analyzer. There is no way to sync the sweep of the 1900 and the YBT350.
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
Top
lau190
New User
Posts: 7
Joined: Fri Nov 04, 2011 3:12 am

Re: IFR1900 Tracking Gen. question

Post by lau190 »

Thanks
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”